• Journal of Chest Surgery
• /
• 제31권6호
• /
• pp.553-559
• /
• 1998

서론: 초저체온 순환정지법은 일부 심장수술에서 매우 유용하게 사용되고 있다. 그러나 사람은 정상 생리상태에서 이 정도 저체온에 노출되는 적이 없기 때문에 초저체온 상태에서 $\alpha$-STAT와 pH-STAT 산-염기 조절법 중 어느 쪽을 택하는 것이 좋으냐에는 여전히 이론이 많다. 본실험에서는 어린 돼지에서 초저체온 순환정지 실험모델을 확립한뒤 pH-STAT와 $\alpha$-STAT 간에 (1) 심폐바이패스 냉각 및 재가온시 뇌냉각 및 재가온 속도 비교, (2) 뇌혈류, 뇌대사 및 뇌혈류/뇌대사 비의 변화 양상 분석, 그리고 (3) 초저체온 순환정지후 뇌부종 정도를 비교 분석하였다. 대상 및 방법: 25~30 KG의 어린 돼지를 실험군마다 7마리씩 사용하였다. 마취후 두개골을 절제하고 상시상동 삽관을 통해 뇌혈류를 측정하였다. 그리고 정중흉골절개술 및 캐뉼라 삽관후 심폐바이패스를 시행하였다. 막형 산화기와 롤러펌프를 사용하였고, 관류속도는 2500 ml/min로 유지시켰다. 심폐바이패스 시작후 첫 10~15분 동안 정상체온 관류를 시행한 뒤 이어 $20^{\circ}C$(비인두체온) 까지 관류냉각을 시행하였다. $20^{\circ}C$에서 40분 동안 완전순환정지를 시행하였다. 냉각기간 동안 실험군에 따라 $\alpha$-STAT 또는 pH-STAT에 따른 산-염기 조절을 시행하였다. 순환정지후에는 정상 체온까지 재가온하였다. 재가온 종료후 실험동물을 희생시키고 뇌를 추출하였다. 뇌혈류 및 뇌대사 측정은 바이패스전, 냉각전, 순환정지전, 재가온후 15분, 재가온 종료시, 재가온 종료후 1시간에 각각 시행하였다. 결과: 양군간 냉각시간은 $\alpha$-STAT군이 16.57$\pm$5.13분으로 pH-STAT 군의 22.83$\pm$2.14분 보다 유의하게 짧았으나(P<0.05), 재가온시간에서는 $\alpha$-STAT군(40.0$\pm$5.07분)과 pH-STAT군(46.5$\pm$6.32) 사이에 유의한 차이는 없었다. 뇌혈류 및 뇌대사에서는 pH-STAT군이 $\alpha$-STAT군에 비하여 높은 경향을 보였지만 통계학적으로 유의한 차이는 없었다. 뇌혈류량/뇌대사율의 비에서도 두군간에 차이가 없었다. 그러나 두 실험군내에서 체온변화에 따른 뇌혈류량 및 뇌대사의 차이는 유의하였다. 특히 비인두체온 20도에서는 뇌대사율의 감소가 뇌혈류의 감소 보다 더욱 커서 결과적으로 뇌혈류량/뇌대사율의 비는 1 보다 높은 수치로 기록되었다. 뇌수분양은 두 실험군간에 유의한 차이는 없었다. 결론: 본 실험에서 $\alpha$-stat와 pH-STAT 산염기 조절법간에 냉각시간 이외에는 유의한 차이가 없음을 알 수 있었다.

• 한국주조공학회지
• /
• 제17권6호
• /
• pp.592-597
• /
• 1997

The microstructure and tensile properties of Mg-Zn-Ca and Mg-Zn-Mn-Ca alloys have been investigated. The alloys were obtained by melting in a low carbon crucible coated with boron nitride under an Ar gas atmosphere to prevent oxidation and combustion. The Mg alloy melt was cast into the metallic mold at room temperature, and cooling part was located at the bottom of mold. The phase formed during solidification of the Mg-Zn-(Mn) alloys containing 0.5%Ca is $Ca_2Mg_6Zn_3$. The yield strength and ultimate tensile strength of the alloys increased with increasing Zn content, but the ductility did not change with increasing Zn content. The addition of Mn improves the yield strength and ultimate tensile strength of the alloys, but the ductility did not change. Tensile fracture of the alloys revealed brittle failure, with cracking along the $Ca_2Mg_6Zn_3$ phase. The variation of stress with strain obeyed the relationship of the ${\sigma}=K{\varepsilon}^n$.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.187-195
• /
• 2006

In this work, we introduce a newly constructed arc-jet device of 150 kW input power. The design of this device is a Huels type with a narrow downstream electrode. General features of this device are first described. From the measured values of electrical power input, heat discharged into cooling water, gas flow rate, and settling chamber pressure, average enthalpy was determined using the heat balance and sonic throat methods. Using the settling chamber pressure and average enthalpy values, the flow properties in the nozzle and the heat transfer rate to the stagnation point of a blunt body are calculated accounting for thermochemical nonequilibrium. The envelope of enthalpy, pressure, degree of dissociation, and heat transfer rate are presented. Stagnation temperature is predicted to be between 4630 to 6050 $^{\circ}K$, and the stagnation point heat transfer rate is predicted to be between 175 and 318 W/$cm^{2}$ for a blunt body of 3 mm nose radius. Degree of dissociation in the stagnation region of the blunt body exceeds 30%.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.769-778
• /
• 2012

Diesel DeNOx experiments using the SNCR process were performed by directly injecting NH3 into a simulated engine cylinder (966 $cm^3$) for which a diesel fuelled combustion-driven flow reactor was designed by simulating diesel engine geometry, temperature profiles, aerodynamics and combustion products. A wide range of air/fuel mixtures (A/F=20~45) were combusted for oxidizing diesel flue gas conditions where an initial NOx levels were 250~900 ppm and molar ratios (${\beta}=NH_3/NOx$) ranged from 0.5~2.0 for NOx reduction tests. Effective NOx reduction occurred over a temperature range of 1100~1350 K at cylinder injections where about 34% NOx reduction was achieved with ${\beta}$=1.5 and cylinder cooling at optimum flow conditions. The effects of simulated engine cylinder and exhaust parts, initial NOx levels, molar ratios and engine speeds on NOx reduction potential are discussed following temperature gradients and diesel engine environments. A staged injection by $NH_3$ and diesel fuel additive is tested for further NOx reduction, and more discussed for practical implication.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.126.1-126.1
• /
• 2015

A quantitative relationship between Leidenfrost point and surface characteristics such as surface material and roughness is investigated. Based on the relationship, we have fabricated the surfaces with their Leidenfrost points (LFP) tuned by controlling surface coating and structures. As discovered by Leidenfrost, liquids placed on a hot plate levitate on the gas phase-air gap formed by the vaporization of liquids. This phenomenon is called 'Leidenfrost effect'. A change of LFP has attracted many researchers for several years but the ability to tune LFP is still a remaining issue. Many of previous work has progressed for various conditions so the systematic approach and analysis are needed to clearly correlate the LFP and the surface conditions. In this report, we investigate a relation of surface energy and LFP using various coating materials such as Octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, 2H-Perfluorooctyltrichlorosilane (FOTS). Also, we analyze how surface roughness affects LFP via surface micro structuring with ICP-RIE fabrication process. The improved understanding can have potential applications such as the control of liquid droplet behavior at elevated temperatures for efficient cooling system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.782-789
• /
• 2001

Local heat/mass transfer and friction loss in a square duct roughened with various types of continuous and discrete rib turbulators are investigated. The combined effects of the gap flows of the discrete ribs and the secondary flows are examined for the purpose of the reduction of thermally weak regions and the promotion of the uniformity of heat/mass transfer distributions as well as the augmentation of average heat/mass transfer. The rib-to-rib pitch to the rib height ratio (p/e) of 8 and the rib angles of 90 and 60 deg are selected with $e/D_{h}=0.08$. The vortical structure of the secondary flows induced by the parallel angled arrays are quite distinct from that induced by the cross angled arrays. This distinction influences on heat/mass transfer and friction loss in all the tested cases. The gap flows of the discrete ribs reduce the strength of the secondary flows but promote local turbulence and flow mixing. As a result, the fairly uniform heat/mass transfer distributions are obtained with two row gaps.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.62-67
• /
• 2009

Welding deformation during the assembly process is affected by not only local shrinkage due to rapid heating and cooling, but also root gap and misalignment between parts to be welded. Therefore, the prediction and control of welding deformation have become of critical importance. In this study, it was focused on the development of the 3-axis apparatus for real-time measurement of the welded deformation. To achieve the objective, a D-H algorithm has been carried out to check the behavioral and performance evaluation for the developed robot. The sequence experiments were taken the base materials of $400{\times}200{\times}4.5mm$ plate for butt welding. The real-time experimental measurements are in good agreement with the measured results.

• 대한기계학회논문집B
• /
• 제31권7호
• /
• pp.628-634
• /
• 2007

The present study investigated the heat/mass transfer characteristics in an equilateral triangular channel simulating the leading edge cooling passage in gas turbine blade. Using naphthalene sublimation method and pressure measurement experiments, local mass (heat) transfer and pressure coefficients were obtained. The experiments were conducted with three rotating numbers between 0.0 and 0.1; two channel orientations of $0^{\circ}$ (model A) and $30^{\circ}$ (model B); the fixed Reynolds number of 10,000. The results showed that the channel rotation caused the heat transfer discrepancy between suction and pressure sides. Due to the secondary flow induced by Coriolis force, the high heat transfer appeared on the pressure side. When the channel orientation was $30^{\circ}$ (model B), the secondary flow caused the more uniform heat transfer distribution among leading edge and inner wall on pressure side than that of the model A.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.37-42
• /
• 2015

본 논문은 가정의 6종 미터기(수도, 온수, 난방, 냉방, 가스, 전력량)의 계량을 통합하여 검침할 수 있는 통합 검침장치 지시부(HCD)를 개발에 대한 연구이다. 본 개발 장치에서는 각 세대의 6종 계량기의 계량값을 원격으로 검침하여 표시부에 표출하는 한편, 이 검침값들을 통신라인을 통하여 원격검침 서버컴퓨터로 보내질 수 있는 기능을 구현하기 위하여 2개의 MCU로 미터기 검침과 서버응답 기능을 분리하여 수행하는 방법을 제시한다. HCD의 하드웨어 설계, 통신 프로토콜, HCD 용 LCD 설계, 프로그램 구성 등과 함께 완성된 시스템의 테스트 결과를 보여준다. 제안된 방법에 의하여 개발된 시스템을 automatic meter reading(AMR)에 적용할 경우 기존시스템 보다 응답이 빠르며, 가격, 설치비, 유지비 등이 저렴한 장점이 있다.

• Journal of Chest Surgery
• /
• 제15권2호
• /
• pp.259-265
• /
• 1982

We have designed a new type of bubble oxygenator (KOREA-KIM VENOTHERM OXYGENATOR) made of PVC sheet and deforming mesh incorporated in the heat exchanger, and evaluated in experimental animal for the analysis of it`s efficiency. The Oxygenator has low priming volume with high flow rate up to 6 L/rain, and efficiency of heat exchanger was excellent as 1-$1.5^{\circ}C.$ using total cardiopulmonary bypass method under moderate to deep hypothermia. Average priming volume of 1317 ml with 30% hemodilution method was perfused with an average of 1.1-3.0 L/min.$M^2$of arterial blood and pure oxygen at a rate of 2-3.4 L/min for 49.6 minutes continuously in average. During total cardiopulmonary bypass, average $PaO_2$ was $159.8{\pm}60$mmHg, $PaCO_2$ $41.0{\pm}3$mmHg respectively under $SaO_2$ over 96% with systolic arterial pressure of 70 mmHg and CVP of 5-10 cm$H_2O$. Plasma free Hemoglobin was $7.0{\pm}4$ mg/dl with 25% drop of hemoglobin and hematocrit at the end of cardiopulmonary bypass. This KKV Oxygenator was observed to have excellent capabillty of oxygen and carbon dioxide gas transfer with small amount of blood trauma, and the efficiency of heat exchanger was satisfactory during cooling and rewarming of the bubbled blood. Disadvantages have included the somewhat poor deforming effect due to loose PVC fiber mesh, the extracompact character of Teflon filters, and the rough inner surface of the heat exchanger copper pipes.