• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.119-125
• /
• 2016

Fresh-cut agricultural products provide convenience to consumers. However, quality changes or microbial growth can easily occur due to physical changes such as cutting and peeling etc. during processing. Therefore, efforts have been made to develop a functional packaging for extension of shelf life of fresh-cut agricultural products, food etc., and researches on prolongation of storage period have been actively developed. The shelf life is extended by antimicrobial, far infrared rays, air permeability, anti-fogging, weak current, ethylene gas adsorption or decomposition, gas composition changes such as MA (Modified Atmosphere) or CA (Controlled Atmosphere). The method of extending the shelf life by various complex factors. This paper based on the published literature to extend the shelf life of fresh-cut agricultural products, food etc., The paper has summarized the storage period extension packing method, packaging material for shelf life extension and comprehensive evaluation method.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.30-35
• /
• 2003

Product liability(PL) law imposes the liability on manufacturer or wholesaler when the product defects cause harm to consumers of the products or any other parties in their lives, bodies, or properties. In Korea, the law of product liability was enforced in July 2002. In this study the Product Liability Response System of chemical products was developed by using Failure Mode and Effect Analysis(FMEA). For a case study peformed for N,N-Dimethylethylamine. First, product information was gathered through Material Safety Data Sheet(MSDS)and which considered as an instruction manual of chemical product. And an effect caused by product defects is analyzed by FMEA to get Risk Priority Number(RPN) which is calculated by multiplying of severity, occurrence, and detection of the defects. Then hazard was estimated quantitatively by RPN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.219-220
• /
• 2016

A power management system (PMS) has been an important part in a ship integrated control system. To evaluate a PMS for a liquefied natural gas carrier (LNGC), this research proposes a real-time hardware-in-the-loop simulation (HILS), which is composed of major component models such as turbine generator, diesel generator, governor, circuit breaker, and 3-phase loads on MATLAB/Simulink. In addition, FPGA based control console and main switchboard (MSBD) are constructed in order to develop an efficient control and a similar real environment in an LNGC PMS. A comparative study on the performance evaluation of PMS functions is conducted using two test cases for sharing electric power to consumers in an LNGC. The result shows that the proposed system has a high verification capability for the operating function and failure insertion evaluation as a PMS simulator.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.2
• /
• pp.12-18
• /
• 2001

Increasing use of plastics in food packaging materials has led to the issue of food-plastic packaging materials mutual interactions. Rapid development of new microwavable ready-to-meal products requires suitable plastic packaging materials for safe heating with the contained food. However, data is still required to diminish consumers' safety concern about ready to meal packaging materials. Amounts and patterns of extracted materials from the ready-to-meal packaging materials of Korea and Japan by heat treatments ($120^{\circ}C$ for 30 min.) was investigated and compared by using Gas chromatography. Total peak number of extracted materials from Korea packaging materials was six while that of extracted materials from Japan's was only two. Moreover, the extracted amounts of packaging materials from Korea company was much higher than those of Japan's. Additional research is needed to justify the reason why extracted materials from packaging materials from Korea be much more occurred, and how the amounts from Korea packaging materials can be reduced.

• Journal of Animal Science and Technology
• /
• v.62 no.2
• /
• pp.111-120
• /
• 2020

The definition of meat analog refers to the replacement of the main ingredient with other than meat. It also called a meat substitute, meat alternatives, fake or mock meat, and imitation meat. The increased importance of meat analog in the current trend is due to the health awareness among consumers in their diet and for a better future environment. The factors that lead to this shift is due to low fat and calorie foods intake, flexitarians, animal disease, natural resources depletion, and to reduce greenhouse gas emission. Currently, available marketed meat analog products are plant-based meat in which the quality (i.e., texture and taste) are similar to the conventional meat. The ingredients used are mainly soy proteins with novel ingredients added, such as mycoprotein and soy leghemoglobin. However, plant-based meat is sold primarily in Western countries. Asian countries also will become a potential market in the near future due to growing interest in this product. With the current advance technology, lab-grown meat with no livestock raising or known as cultured meat will be expected to boost the food market in the future. Also, insect-based products will be promising to be the next protein resource for human food. Nevertheless, other than acceptability, cost-effective, reliable production, and consistent quality towards those products, product safety is the top priority. Therefore, the regulatory frameworks need to be developed alongside.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.133-137
• /
• 2011

Low-e glazing is classified as soft low-e glazing and hard low-e glazing. Hard low-e glazing can be temperable and its handling is comfortable because its coating film is a oxide film generated at high temperatures. But there is a fatal weakness that its insulation performance and shielding performance are lower compared to soft low-e glazing by low electrical conductivity of coating film. Soft low-e glazing is excellent because its coating film consists of Ag that is excellent electrical conductivity and it has strength that can supply various product consumers want. But soft low-e glazing has weaknesses that temperable and handling are difficult because Ag is oxidized easily. Therefore this study analyzes thermal performance of glazing by changing filling gas according to applying low-e glazing through simulation to judge performance before making sample. After this process, a comparative experimental study was done through TVS by making temperable low-e glazing.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.568-579
• /
• 2018

Virtual power plants can be regarded as systems that have entered the network after restructure of power systems. In fact, these plants are a set of consumers capable of consuming and generating power. In response to widespread implementation of plug-in hybrid electric vehicles, further investigation of energy management in this type of power plants seems to be of great value. In effect, these vehicles are able to receive and inject power from/into the network. Hence, study of the effects of these vehicles on management of virtual power plants seems to be illuminative. In this paper, management of power consumption/generation in virtual power plants has been investigated in the presence of hybrid electric vehicles. The objective function of virtual power plants problem management is to minimize the overall costs including not only the costs of energy production in power generation units, fuels, and degradation of batteries of vehicles, but also the costs of purchasing electricity from the network. Furthermore, the constraints on the operational of plants, loads and hybrid vehicles, level of penalty for greenhouse gas emissions ($CO_2$ and $NO_x$) produced by power plants and vehicles, and demand response to the immediate price of market have all been attended to in the present study. GAMS/Cplex software system and sample power system have been employed to pursue computer implementation and simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.264-268
• /
• 2016

Recently, various energy efficiency optimization activities are ongoing globally by integrating conventional grids with ICT (Information and Communication Technology). In this sense, various smart grid projects, which power suppliers and consumers exchange useful informations bilaterally in real time, have been being carried out. The electric vehicle diffusion program is one of the projects and it has been spotlighted because it could resolve green gas problem, fuel economy and tightening environmental regulations. In this paper, the economics of V2G system which consists of electric vehicles and the charging infrastructure is evaluated comparing electric vehicles for V2G with common electric vehicles. Additional benefits of V2G are analyzed in the viewpoint of load leveling, frequency regulation and operation reserve. To find this benefit, electricity sales is modeled mathematically considering depth of discharge, maximum capacity reduction, etc. Benefit and cost analysis methods with the modeling are proposed to decide whether the introduction of V2G systems. Additionally, the methods will contribute to derive the future production and the unit cost of electric vehicle and battery and to get the technical and economic analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1244-1255
• /
• 2019

Dairy goat production continues to be a socially, economically and culturally important part of the livestock industry in North, Central and South America and the Caribbean islands. Goat milk, cheese and other dairy products offer consumers food products with nutritional, health and environmental benefits. In North America, Mexico produces the greatest volume of goat milk, but most is for family or local consumption that is typical of a mixed farming system adopted by subsistence farmers in dry areas. The United States is not yet a large global goat milk producer, but the sector has expanded rapidly, with dairy goat numbers doubling between 1997 and 2012. The number of dairy goats has also increased dramatically in Canada. Commercial farms are increasingly important, driven by rising demand for good quality and locally sourced goat cheese. In South America, Brazil has the most developed dairy goat industry that includes government assistance to small-scale producers and low-income households. As of 2017, FAO identified Haiti, Peru, Jamaica, and Bolivia as having important goat milk production in the Western Hemisphere. For subsistence goat producers in the Americas on marginal land without prior history of chemical usage, organic dairy goat production can be a viable alternative for income generation, with sufficient transportation, sanitation and marketing initiatives. Production efficiency, greenhouse gas emission, waste disposal, and animal welfare are important challenges for dairy goat producers in the Americas.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.4
• /
• pp.211-216
• /
• 2022

Since liquefied natural gas (LNG) is imported in a liquid state of about -162℃ to increase transportation efficiency in Korea, it must be vaporized in a gaseous state to supply it to consumers. Among them, ambient air vaporizer (AAV) has caught attention due to eco-friendly and low costs characteristics. However, there is a disadvantage that the performance of the heat exchanger is deteriorated due to frost due to mist and icing when used for a long time. In this paper, frost generation model in AAV vaporizer was investigated with numerically to examine utilizing the vaporizer performance with the frost generation behavior. The frost generation behavior of AAV vaporizers was examined with humidity, fin characteristic, and temperature effects. As for the LNG discharge temperature, the 12 fin vaporizer showed the highest discharge temperature when the atmospheric temperature was 25℃, and the 8 fin vaporizer had the lowest LNG discharge temperature when the atmospheric temperature was 0℃. In the case of frost formation, in the case of the 12 fin vaporizer, it was formed the most at the atmospheric temperature of 25℃, and the least was formed in the vaporizer at the 0℃ condition of the atmospheric temperature of 8 fins.