• 제목/요약/키워드: Gas Bearing

검색결과 244건 처리시간 0.021초

PTFE-폴리이미드 복합 재료의 마찰과 마모에 대한 성분비와 온도의 영향 (Effects of Composition Ratio and Temperature on Friction and Wear of PTFE-Polyimide Composites)

  • 심현해;권오관;이규한;김병환
    • Tribology and Lubricants
    • /
    • 제12권3호
    • /
    • pp.55-62
    • /
    • 1996
  • Present study was undertaken to investigate the effects of composition ratio and temperature on the friction and wear of PTFE-polyimide composites under the atmosphere of nitrogen gas. The load range was 0.62-3.46 MPa, and the temperature range was room temperature and 200$^{\circ}$C. To mention some of the notable results, friction coefficient of PTFE 100% varied relatively little within the given load and temperature ranges. Polyimide 100% showed the lowest friction coefficient of 0.06 at 200$^{\circ}$C among all the experiments. PTFE 80%-polyimide 20% showed the lowest wear factors on the whole. Friction coefficient of PTFE 20%-polyimide 80% varied from the highest 0.35 to the lowest 0.09 among all the materials at room temperature, and showed almost the same lowest values with polyimide 100% at 200$^{\circ}$C. Suggestion of friction and wear mechanisms of the materials was tried to explain the observed phenomena including above mentioned results.

공기정압 베어링의 정 동특성에 관한 연구 (Static and Dynamic Characteristics of Aerostatic Gas Bearing)

  • 전경석;한동철
    • Tribology and Lubricants
    • /
    • 제6권2호
    • /
    • pp.60-67
    • /
    • 1990
  • 최근 전자 및 광학 분야에 있어서의 눈부신 발전은 다면경 가공기나 초정밀 연삭기와 같은 초정밀 가공기계의 개발과 실용화에 힘입은 바 크다. 이러한 초정밀 가공기의 성능을 좌우하는 핵심 요소로서 추축계를 들수 있으며, 비교적 소형 경량의 공박물을 가공하는 기계의 주축용 베어링으로는 오일 베어링을 대신하여 공기 베어링이 점차 널리 사용되고 있다. 이러한 가공기에 많이 사용되는 외부 가압 공기 베어링은 동압 공기 베어링과는 달리, 외부에서 가압된 압축공기에 의하여 공기막을 형성하므로, 시동과 정지시 마멸이 없고 저속에서도 비교적 높은 하중 지지력을 얻을 수 있으며, 오일 베어링과 비교하여서는 발열이 적고 윤활제의 유출에 의한 오염의 위험이 없다는 특성외에 공기막에 의한 평균화 효과에 의하여 고정도의 운전이 가능하다는 장점이 있다. 본 연구에서는 점급기원의 가정하게 직접 수치해법을 사용하는 해석 프로그램을 작성하여, 무차원화된 설계 변수들에 대한 외부가압 공기베어링의 정$\cdot$동특성수들을 구하고자 한다.

전동기 공극부 냉매의 유막력을 고려한 로터리 압축기용 회전축계의 진동해석 (Vibration Analysis of Rotor System for Rotary Compressor Considering Hydrodynamic Force between Motor Rotor and Stator)

  • 김용한;양보석;안병하;이장우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1058-1064
    • /
    • 2000
  • The analysis of dynamic behaviour of rotor system for the rolling piston type rotary compressor considering hydrodynamic force between motor rotor and stator is presented. In addition to considering other dynamic, loads such as large unbalance forces, gas force and bearing force, we consider the hydrodynamic force induced by the compressed fluid flow through the air gap between motor rotor and stator, and improve the analysis of vibration in rotary compressor. The Childs' method which based on Bulk-now and Hirs' turbulent lubrication model is used to calculate the rotordynamic coefficients due to hydrodynamic force of annular clearance in motor air gap.

  • PDF

싱글 스크류 압축기의 스크류 로터의 설계 및 가공 (Design and Machining of a Screw Rotor of a Single-Screw Compressor)

  • 김두형;경진호;김왕환
    • 한국생산제조학회지
    • /
    • 제25권6호
    • /
    • pp.452-457
    • /
    • 2016
  • Single screw compressors are widely used in the fields of air/gas compression, refrigeration, and chemical fluid transportation systems. A single-screw compressor is composed of a screw rotor and two gate rotors located at both sides. This simple construction enables low rotational speed of the rotor, efficient compression with low noise, low vibration, and long bearing life. Despite these merits, the design method of single-screw compressors is not well known. To accelerate the industrial application of single-screw compressors, a design method using coordinate transformation is presented in this paper, and a tool trajectory is established for machining. Finally, the screw rotor, which is machined using the proposed method, is presented.

H-Y항체의 처리가 생쥐수정란의 발달에 미치는 영향 (Effect of H-Y Antibody on in vitro Development of Mouse Embryos)

  • 고정재;심호섭;김종배;박홍양;정길생;이경광
    • 한국가축번식학회지
    • /
    • 제10권1호
    • /
    • pp.42-48
    • /
    • 1986
  • These experiments were carried out to develop new techniques identifying XX-bearing embryos prior to implantation by immunological method. Antiserum to histocompatibility-Y(H-Y) antigen was prepared in adult SD(sprague-dawley) female rat by repeated immunization of newbone testis supernatant from males of the same strain. ELISA test was used to identify the H-Y antibody of antiserum. Total 124 mouse embryos (8-cell stage) were treated with H-Y antiserum and complement in BSA free Ho, pp. and Pitt's medium and cultured under the gas phase of 5% CO2 in air at 37$^{\circ}C$ for 24 to 48 hrs. The morphological characteristics of embryos treated were observed under the phase-contrast micro scope. The results obtained in these experiments were summarized as follows: 1. Optimal Density of H-Y antibody were a, pp.ared to be 0.27-0.47 by ELISA test. 2. Of total 124 embryos treated with H-Y antiserum and complement 69(55.6%) embryos developed to blastocyst and 55(44.4%) destroyed or arrested.

  • PDF

염색체 분석에 의한 생쥐 수정란의 성감별 (Sexing of Mouse Embryos by Chromosomal Analysis)

  • 한용만;김종배;박홍양;정길생;이경광
    • 한국가축번식학회지
    • /
    • 제10권1호
    • /
    • pp.36-41
    • /
    • 1986
  • These experiments were carried out to obtain basic information necessary for sexing embryos by chromosomal analysis. To observe metaphase chromosomes, all embryos developed to blastocysts were cultured in Ho, pp. & Pitts' medium containing 0.001% Colcemid under the gas phase of 5% CO2 in air at 37$^{\circ}C$ for 2 hours. The sex chromosome of mouse embryos shown normal development after culture in medium containing H-Y antiserum (10%, v/v) and complement (20%, v/v) also was confimed by chromosomal analysis. The results obtained in these experiments were summarized as follows: 1. Among 89 mouse blastocysts, the number of embryos identified to have XX and XY chromosome was 22(25%) and 25(28%), respectively and 42(47%) embryos were not identified. 2. Of total 40 mouse balstocysts cultured in medium containing H-Y antiserum and complement, 23(58%) embryos which were able to be discriminated their sex chromosomes were identified to be XX bearing embryos. 3. Sex chromosomes of a number of embryos subjected to chromosomal analysis were not identified. This result may be due to absence or poor quality of metaphase spreads.

  • PDF

원자로 냉각재 이송을 위한 평편형 리니어 유도펌프의 설계 (The Design of Flat Linear Induction Pump for Transferring Reactor Coolant)

  • 장석명;우종섭;김형규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
    • /
    • pp.10-12
    • /
    • 1998
  • Pumping liquid metal in nuclear power plant application by conventional centrifugal pumps pose difficulties such as bearing wear out at high temperatures and leak proof sealing of the liquid metal. MHD machine is obtained by replacing solid conducting secondary of conventional motors with ionized gas or liquid metal. It is used for reactor cooling pump because of construction simplicity, perfect sealing and easy operation/maintenance MHD pump is complicated because it includes electromagnetic and hydrodynamic phenomena. The principle of MHD Pumps is described in this paper. We design small laboratory size Flat Linear Induction Pump(FLIP) for transferring sodium.

  • PDF

암반 정착 대구경 피어기초의 거동특성에 관한 연구 (The Behavior of Large Diameter Rock Socketed Piles)

  • 김태현;김찬국;황의석;이봉열;김학문
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1245-1250
    • /
    • 2006
  • The rapid growth of the economy recently gas led to increasing social needs for large scaled structures, such as high-rise buildings and long span bridges. In building these large-scaled structures the trend has been to construct foundations beating on or in rock masses in order to ensure stability and serviceability of the structure under several significant loads. However. when designing the drilled shaft foundation socketed in rock masses in Korea, the bearing capacity for the pier used to be determined by using the empirical expression, which depends on the compressive strength of the rock, or presumable bearing capacity recommended on foreign references or manuals. In this study, numerical analyses are used to trace rock-socketed pile behavior and are made alike with pile load test result in field. The result of this numerical analyses study have shown that following factors have a significant influence on the load capacity and settlement of the pier. Significant influence first factor of the geometry of the socket as defined by the length to diameter ratio. Second factor of the modulus of the rock both around the socket and below the base. third factor of the condition of the end of the pier with respect to the removal of drill cuttings and other loose material from the bottom of the socket.

  • PDF

월악 중석-몰리브덴 광상의 유체포유물 연구 (Fluid Inclusion Studies on the Wolak Tungsten-Molybdenum Deposits, Korea)

  • 이인성;박희인
    • 자원환경지질
    • /
    • 제15권1호
    • /
    • pp.17-32
    • /
    • 1982
  • 월악 중석-몰리브덴 광상은 옥천충군에 속하는 함력석회질 호온펠스, 호온펠스 그리고 이를 관입한 백악기의 화강암내에 발달한 주향 $NS-N20^{\circ}W$, 수직에 가까운 경사의 열극을 충전한 항중석-몰리브덴 석영맥이다. 광산의 채광장은 서쪽의 동산지구와 동쪽의 광천지구로 나누어져 있다. 두 지구에서 산출되는 광석광물은 철망간중석, 회중석, 휘수연석, 창연, 휘창연석, 황철석, 유비철석 황동석, 큐바나이트, 스태나이트, 자류철석, 섬아연석, 방연석, 백철석, 티단철석, Pb-Bi sulfosalt이다. 맥석 광물로는 석영, 방해석, 녹주석, 형석, 백운모, 능망간석 및 능철석이 산출된다. 유체포유물 연구는 석영, 녹주석, 희중석, 초기의 형석 그리고 말기의 형석을 그 대상으로 하였다. 액체 $CO_2$를 포함하는 포유물은 석영과 초기의 형석에서만 발견된다. 동산지구에서 유체포유물의 염농도는 석영에서 3.9~8.0wt.% 녹주석에서 5.3~7.7wt.%의 범위이며, 광화작용의 말기에 정출한 형석에서는 1.5~3.2wt.%의 범위이다. 광천지구에서의 염농도는 석영에서 3.9~9.6wt.%, 초기의 형석에서 2.9~7.3wt.%, 말기의 형석에서 1.3~1.5wt.%의 범위를 가진다. 유체포유물의 균일화온도는 동산지구의 석영에서 $239^{\circ}{\sim}360^{\circ}C$ 이상, 회중석에서 $360^{\circ}C$ 이상, 녹주석에서 $288^{\circ}{\sim}360^{\circ}C$이상, 말기의 형석에서는 $159^{\circ}{\sim}202^{\circ}C$의 범위를 갖는다. 광천지구에 있어서 유체포유물의 균일화 온도는 석영에서 $240^{\circ}{\sim}360^{\circ}C$ 이상, 초기의 형석에서는 $240^{\circ}{\sim}328^{\circ}C$의 범위이다. 전체적으로 보아 동산지구나 광천지구간에 뚜렷한 광물이나 염농도, 균일화 온도의 차이는 나타나지 않는다. 양지역에 있어서 노두에서 수직으로 약 300m 깊이까지에 걸쳐 상하간에 균일화 온도의 차이는 보이지 않으나 염농도는 하부로 갈수록 약간 증가하는 경향을 보인다. 광화유체는 석영, 녹주석, 초기의 형석등이 정출한 광화작용의 비교적 초기단계에 있어서는 $CO_2$ 농도, 온도와 염농도가 높았으나 말기의 형석의 정출시기에는 $CO_2$ 농도, 온도와 염농도가 현저히 낮아진 것으로 보인다.

  • PDF

가스 포일 베어링 범프 구조의 1 자유도 가진/가압 실험을 통한 주파수 의존 동특성 규명 (Identification of Frequency-Dependent Dynamic Characteristics of a Bump Structure for Gas-Foil Bearings via 1-DOF Shaker Tests Under Air Pressurization)

  • 심규호;박지수;이상훈
    • 대한기계학회논문집A
    • /
    • 제39권10호
    • /
    • pp.1029-1037
    • /
    • 2015
  • 최근 회전 시스템의 고속화 경향에 따라 회전체 동역학적 안정성의 중요성이 부각되었다. 고속회전 시스템에 적용되는 가스베어링의 동특성을 규명하는 것은 회전체의 거동을 예측하는데 상당히 중요하다. 본 연구에서는 대표적인 가스베어링인 가스포일베어링의 범프 구조에 대하여 가진실험을 수행하고 가진 주파수에 따른 동특성을 측정하였다. 실험 결과, 범프 구조의 강성은 주파수에 따라 증가하였고 감쇠는 감소하였다. 또한, 가압 조건에서의 동특성은 범프 구조의 동특성 보다 낮은 값을 가졌다. 본 실험을 통해 범프 구조의 주파수 의존 동특성의 경향을 파악하였으며 가스포일베어링의 동특성에 윤활막이 미치는 영향에 대해 확인하였다. 또한 두 가지 동특성 계산 방법을 제시하여 실험결과를 통해 효과 적인 동특성 계산 방법에 대해 비교 고찰하고 범프 구조와 윤활막의 동특성을 비교 하였다.