• Title/Summary/Keyword: Gap Wall

Search Result 394, Processing Time 0.027 seconds

Structural Analysis for Design Improvement of Stainless 5,000ton Rectangular Water Tank Structures (5,000톤급 스테인리스 사각형 물탱크 구조의 설계 개선을 위한 구조해석)

  • Son, Byung-Jik;Lee, Sang-Youl
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.6 no.4
    • /
    • pp.44-50
    • /
    • 2015
  • The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B 6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

A Study on Ecological Application to Buildings on the Streets for the Improvement of Environmental Harmony at Streetscape - Focused on the Three-dimensional Greenery System - (가로경관의 친환경성 증진을 위한 가로변건축물의 생태요소 적용에 관한 연구 - 입체녹화를 중심으로 -)

  • Jeong, Choon-kuk;Kim, Ki-hwan
    • KIEAE Journal
    • /
    • v.8 no.3
    • /
    • pp.13-18
    • /
    • 2008
  • Recently it is urgent issue in every department that problem from environmental disruption such as global warming. As the case of streetscape works essentially at city scenery, it is inevitable that changing from present view, which centers facilities and buildings, to environmental harmonic scenery. This study plans climate adjusting ability and improvement of thermal efficiency by putting ecological elements to buildings on a street which are essential factors of streetscape. Ultimately, this not only makes a pleasant environment but also revives being withered earth. Street-environment on eco-scape will take a part in designing sustainable city. This study acquires the way how buildings on a street get applied ecological elements as following. Roof level part : the greening surface of the rooftop(included plant box type), the greening roof as a type of pergola, the greening surface of the middle floor rooftop(included plant box type). Elevation part : climbing type, downfall type, espalier, flower bed in balcony type, wall-installing type, water wall type, other design types. Ground level part : paving the whole surface with permeability, paving the gap with permeability, plant box type, ground plant type, waterside zone, wetland, fence greening type, terrace greening type, retaining wall greening type.

Annealing effects of AgInS$_2$/GaAs Epilayer grown by Hot Wall Epitaxy

  • K. J. Hong;Park, C.S.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.07a
    • /
    • pp.823-827
    • /
    • 2001
  • The AgInS$_2$epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. From the optical absorption measurement, the temperature dependence of the energy band gap on the AgInS$_2$/GaAs was derived as the Varshni's relation of Eg(T)=2.1365 eV-(9.89${\times}$10$\^$-3/ eV)T$^2$/(2930+T). After the as-grown AgInS$_2$/GaAs was annealed in Ag-,S-, and In-atmosphere, the origin of point defects of the AgInS$_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of V$\_$Ag/, V$\_$s/, Ag$\_$int/, and S$\_$int/ obtained from PL measurement were classified to donors or acceptors type. And, we concluded that the heat-treatment in the S-atmosphere converted the AgInS$_2$/GaAs to optical p-type. Also, we confirmed that the In in the AgInS$_2$/GaAs did net from the native defects because the In in AgInS$_2$did exist as the form of stable bonds.

  • PDF

Study of a Variable Single-tracked Crawler for Overcoming Obstacles (가변형 단일 궤도를 이용한 장애물 극복방법에 관한 연구)

  • Kim, Jee-Hong;Lee, Chang-Goo
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.16 no.4
    • /
    • pp.391-395
    • /
    • 2010
  • In our paper, we propose an asymmetric single-tracked wheel system, and describe its structure and the method for maintaining the length of a transformable track system. And the method is reducing the gap of lengths. Therefore, we propose an efficient structure for transforming and explain motions with kinematics. Our transformable shape single-tracked mobile system has an advantage to overcome an obstacle or stairs by the variable arms in the single unity track system. But we will make the variable shape of tracked system get a drive that has a force to stand against a wall. In this case, we can consider this system to a rigid body and have a notice that this single tracked system is able to get vary shape with the variable arm angle. Considering forces balance along x-axis and y-axis, and moments balance around the center of the mass we have. If this rigid body is standing against a wall and doesn't put in motion, the force of flat ground and the rigid body sets an equal by a friction. In the same way, the force of a wall and the rigid sets an equal by a friction.

Properties of Photoluminescience for AgInS2/GaAs Epilayer Grown by Hot Wall Epitaxy

  • Lee, Sang-Youl;Hong, Kwang-Joon
    • Transactions on Electrical and Electronic Materials
    • /
    • v.5 no.2
    • /
    • pp.50-54
    • /
    • 2004
  • The AgInS$_2$epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. From the optical absorption measurement, the temperature dependence of the energy band gap on the AgInS$_2$/GaAs was derived as the Varshni's relation of E$\_$g/(T) = 2.1365 eV - (9.89${\times}$10$\^$-3/ eV/K) T$^2$/(2930+T eV). After the as-grown AgInS$_2$/GaAs was annealed in Ag-, S-. and In-atmosphere, the origin of point defects of the AgInS$_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of $V_{Ag}$, $V_s$, $Ag_{int}$, and $S_{int}$ obtained from PL measurement were classified to donors or accepters type. And, we concluded that the heat-treatment in the S- atmosphere converted the AgInS$_2$/GaAs to optical p-type. Also, we confirmed that the In in the AgInS$_2$/GaAs did not form the native defects because the In in AgInS$_2$did exist as the form of stable bonds.

Growth and Characterization of $CuInS_2$ Single Crystal Thin Film by Hot Wall Epitaxy (Hot Wall Epitaxy(HWE) 방법에 의해 성장된 $CuInS_2$)

  • 최승평;홍광준
    • Korean Journal of Crystallography
    • /
    • v.11 no.3
    • /
    • pp.137-146
    • /
    • 2000
  • The stoichiometric mix of evaporating materials for he CuInS₂ single crystal thin films was prepared. To obtain the single crystal thin films, CuINS₂ mixed crystal was deposited on etched semi-insulator GaAs(100) substrate by the hot wall epitaxy(HWE) system. The source and substrate temperature were 640℃ and 430℃, respectively and the thickness of the single crystal thin films was 2 ㎛. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility deduced from Hall data are 9.64x10/sup 22//㎥ and 2.95x10/sup -2/ ㎡/V·s, respectively at 293 K. he optical energy gap was found to be 1.53 eV at room temperature. From the photocurrent spectrum obtained by illuminating perpendicular light on the c-axis of the thin film, we have found that the values of spin orbit coupling splitting ΔSo and the crystal field splitting ΔCr were 0.0211 eV and 0.0045 eV at 10K, respectively. From PL peaks measured at 10K, were can assign the 807.7 nm (1.5350 eV) peak to E/sub x/ peak of the free exciton emission, the 810.3 nm(1.5301 eV) peak to I₂ peak of donar-bound exciton emission and the 815.6 nm(1.5201 eV) peak to I₁ peak of acceptor-bound excition emission. In addition, the peak observed at 862.0 nm(1.4383 eV) was analyzed to be PL peak due to donor-acceptor pair(DAP).

  • PDF

A Study on Thermal performance as Form of Steel stud by Using Thermal Video Camera (열화상 카메라를 이용한 건식벽체의 스틸스터드 형상에 따른 열성능 비교연구)

  • Jang, Cheol-Yong;Um, Eun-Jung;Lee, Na-Eun
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.236-240
    • /
    • 2009
  • Dry wall using steel stud has the advantage of possibility to install various building, so it used to many buildings inside and outside of the country very rapidly. Though Light gauge steel framed housing offers many advantages to the consumer and the builder, the use of steel studs in wall system cause thermal problems such as thermal performance and pattern staing on walls. The present study has been conducted to observe effect of stud by the shape, and two kind of stud is made for this test to compare thermal performance. The test was conducted by setting those stud on the chamber and heating them. As the results of test and photograping by using TVS, there was temperature gap of each stud, and surface temperature of each section was appeared differently due to shape of stud delaying thermal bridge.

  • PDF

Is Ossiculoplasty Necessary in Canal Wall Down Mastoidectomy? Comparison of Clinical Outcomes Between Type 0 Tympanoplasty and Ossiculoplasty

  • Suh, Michelle J.;Park, Jin-A;Yi, Hee Jun;Song, Chan Il
    • Journal of Audiology & Otology
    • /
    • v.25 no.2
    • /
    • pp.104-109
    • /
    • 2021
  • Background and Objectives: To assess whether the audiological and clinical outcomes of type 0 tympanoplasty (T0) performed using cartilage were comparable with those of ossiculoplasty in patients who underwent canal wall down mastoidectomy (CWDM). Subjects and Methods: This study included patients who had chronic otitis media with cholesteatoma and underwent CWDM with ossiculoplasty involving partial ossicular replacement prosthesis (PORP), total ossicular replacement prosthesis (TORP), or T0. Anatomical success rates and hearing outcomes were analyzed. Results: Seventy-two patients were included in this study; 29 of them underwent CWDM with T0, 27 underwent CWDM with PORP, while 16 underwent CWDM with TORP. The difference in mean improvement in the air-bone gap (ABG) between the groups was not significant. The differences in the rates of ABG closure to ≤10 dB HL (p=0.030) and ≤20 dB HL (p=0.029) were significant. There were significant differences in improvements in the ABG at 3 kHz among the PORP, TORP, and T0 groups. Conclusions: The audiological outcomes of CWDM with ossiculoplasty seemed to be better than those of CWDM with T0 with no significant difference in the incidence of complications following ossiculoplasty and T0.

Is Ossiculoplasty Necessary in Canal Wall Down Mastoidectomy? Comparison of Clinical Outcomes Between Type 0 Tympanoplasty and Ossiculoplasty

  • Suh, Michelle J.;Park, Jin-A;Yi, Hee Jun;Song, Chan Il
    • Korean Journal of Audiology
    • /
    • v.25 no.2
    • /
    • pp.104-109
    • /
    • 2021
  • Background and Objectives: To assess whether the audiological and clinical outcomes of type 0 tympanoplasty (T0) performed using cartilage were comparable with those of ossiculoplasty in patients who underwent canal wall down mastoidectomy (CWDM). Subjects and Methods: This study included patients who had chronic otitis media with cholesteatoma and underwent CWDM with ossiculoplasty involving partial ossicular replacement prosthesis (PORP), total ossicular replacement prosthesis (TORP), or T0. Anatomical success rates and hearing outcomes were analyzed. Results: Seventy-two patients were included in this study; 29 of them underwent CWDM with T0, 27 underwent CWDM with PORP, while 16 underwent CWDM with TORP. The difference in mean improvement in the air-bone gap (ABG) between the groups was not significant. The differences in the rates of ABG closure to ≤10 dB HL (p=0.030) and ≤20 dB HL (p=0.029) were significant. There were significant differences in improvements in the ABG at 3 kHz among the PORP, TORP, and T0 groups. Conclusions: The audiological outcomes of CWDM with ossiculoplasty seemed to be better than those of CWDM with T0 with no significant difference in the incidence of complications following ossiculoplasty and T0.

Operative Resection of a Chronic Flail Chest Nonunion Revealing Septic Pseudarthrosis: A Case Report

  • Robin Deville;Justin Issard;Anna Vayssette;Jalal Assouad
    • Journal of Chest Surgery
    • /
    • v.56 no.6
    • /
    • pp.449-451
    • /
    • 2023
  • We report a case of chest wall resection for painful chest wall nonunion, 5 years after traumatic flail chest and a first attempt at surgical treatment. The decision was made to perform surgery again after 2 years of unsuccessful well-conducted analgesic treatment. During surgery, we found the same sites of pseudarthrosis and decided to perform parietectomy of the fifth, sixth, and seventh ribs. A Gore-Tex patch was used to bridge the gap created by the resection. In immediate postoperative care, the patient's pain was quickly and sufficiently eased by stage 1 and 2 pain killers. The results of bone samples taken from the pseudarthrosis sites all found Propionibacterium acnes. Five months after surgery, the patient had considerable improvement in pain sensations. Computed tomography showed healing of ribs, the plate in place, and no sign of complications.