• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.97-103
• /
• 2014

소방보호복은 고열유속에 의한 화상방지를 위해 3층 이상의 복합소재로 구성되어 있으며, 각 소재 사이는 공기 간극이 존재한다. 화재에 의한 고열유속 노출 시 공기 간극 내에서의 열전달은 대류와 복사에 의해 주로 발생하며, 그로 인해 간극의 크기에 따라서 비선형 특징의 열 저항 크기를 갖게 된다. 그러므로 본 연구에서는 보호복 소재 사이의 여러 가지 공기 간극(0~7 mm)에 대한 보호복의 열 보호성능을 자세히 파악하기 위한 실험을 수행하였다. 복사 열 유속 입사시에 시간에 따른 각 소재의 온도 변화뿐만 아니라, 열 보호성능을 가장 효과적으로 나타낼 수 있는 지표(Radiant Protective Performance, RPP) 값의 공기간극에 대한 변화 특성을 파악하였다. 공기간극이 증가할수록 단열효과가 커짐으로 인해 후면의 온도는 낮아지고, RPP는 커짐을 확인할 수 있었다. 특히 일정 열유속 조건에서 공기간극에 대한 RPP 값은 선형적인 특성을 나타내었고, 그러한 결과를 바탕으로 다양한 입사 열유속 및 공기 간극 조건에 대해 비교적 간단한 형태의 RPP 지표 예측 식을 제안하였고, 좋은 예측 결과를 얻을 수 있었다.

• 한국재료학회지
• /
• 제15권6호
• /
• pp.399-407
• /
• 2005

The effect of IN738 additive powder on microstructure and mechanical properties of the wide-gap region brazed with BNi-3 filler metal powder was investigated. The wide-gap brazing was conducted in a vacuum of $2\times10^{-5}torr\;at\;1200^{\circ}C$ with various powder mixing ratios of additive to filler powders. The microstructures of the wide-gap brazed region were analyzed by SEM and AES. The region brazed with only BNi-3 filler metal powder had a microstructure consisted of proeutectic, binary eutectic and ternary eutectic structure, while that brazed with a mixture of IN738 additive powder and BNi-3 filler metal powder had a microstructure consisted of IN738 additive powder, binary eutectic of $Ni_3B-Ni$ solid solution and (Cr, W)B. The fracture strength of the wide-gap brazed region was about 680 MPa regardless of the additive powder mixing ratios. Cracks were initiated at the (Cr, W)B and binary eutectic of $Ni_3B-Ni$ solid solution, and propagated through them in the wide-gap brazed region, which lowered the fracture strength of the region.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.648-658
• /
• 1998

본 논문에서는 PCB (printed circuit board) 접지면에 셜치된 캡(gap)이 불요전자파 방사에 미치는 영향을 정 량적으로 해석하였다. 본 연구의 해석법으로 복잡한 구조체의 전자기적 특성을 해석하는데 주파수영역 전자파 수치해석 방법들과 비교하여 여러 가지 장점올 가지는 시간영역 해석법인 FDTD(finite difference time dom main) 방법올 사용하였다. 해석 구조체는 일반적으로 생산되는 PCB와 유사한 크기를 선정하였으며 소자충은 전압원과 마이크로스트립만이 폰재하는 단순화된 구조이다. PCB 접지변에 설치된 캡에 의해 생기는 인덕턴스 의 크기와 입출력 케이블올 통한 불요전자파 방사량을 FCC 및 CISPR 규정치와 함께 제시하였으며 갱의 크기 에 따라 방사되는 불요전자파의 세기가 크게 변화되는 것을 관찰할 수 있다. 본 논문의 해석결과는 실제 PCB 셜 계에 있어서 잘봇된 캡의 설치로 인한 불요전자파 방사를 막는데 유용하게 사용될 수 있으리라 생각된다.

• Biomolecules & Therapeutics
• /
• 제11권4호
• /
• pp.224-231
• /
• 2003

The aim of this study was to investigate the effect of resveratrol on the oxidative stress-induced inhibition of gap junctional intercellular communication in HaCaT keratinocytes. Anti-oxidative activity of resveratrol was measured by $\alpha,\alpha$-diphenyl-$\beta$-picrylhydrazyl assay and dichlorodihydrofluorescein diacetate oxidation assay. Gap junctional intercellular communication in HaCaT keratinocytes was assessed using the scrape loading/dye transfer technique. Western blots and reverse transcription-polymerase chain reaction were also analyzed for connexin 43 protein and mRNA expression, respectively. Resveratrol scavenged directly the stable $\alpha,\alpha$-diphenyl-$\beta$-picrylhydrazyl radical over a concentration range of 4 mg/ml ($78.2{\pm}2.7$% of control) to 500 mg/ml ($29.9{\pm}4.2$% of control) and decreased the intracellular reactive oxygen species induced by ultraviolet A (UVA) irradiation ($89.3{\pm}1.1$% of UVA group), ultraviolet B (UVB) irradiation ($70.9{\pm}1.7$% of UVB group) and 12-0-tet-radecanoylphorbol-13-acetate (TPA, $48.3{\pm}1.1$% of TPA group), respectively. UVA irradiation and TPA markedly reduced gap junctional intercellular communication, which was restored by resveratrol. There were no significant differences in the level of connexin 43 protein and mRNA expression among any of the experimental groups. Our data suggests that resveratrol has the protective effect on the oxidative stress-induced inhibition of gap junctional intercellular communication in HaCaT keratinocytes, and this protection is likely due to the scavenging of reactive oxygen species.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.1-10
• /
• 2000

A low-order potential based boundary element method is applied for the prediction of the performance of flapped rudders as well as all-movable rudders in steady inflow. In order to obtain a reasonable solution at large angles of attack, the location of the trailing wake sheet is determined by aligning freely with the local flow. The effect of the wake sheet roll-up is also included with use of a high order panel method. The flow in the gap of a flapped rudder is modeled as Couette flow and its effect is introduced into the kinematic boundary conditions for flux at both the inlet and the outlet of the gap. In order to validate the present method, the method is applied for a series of rudders and the computational results on forces and moments are compared with experimental data. The effect of the gap size on the forces and moments is also presented.

• Communications for Statistical Applications and Methods
• /
• 제20권4호
• /
• pp.283-290
• /
• 2013

Subjects can experience two types of recurrent events in a longitudinal study. In addition, there may exist intermittent dropouts that results in repeated observation gaps during which no recurrent events are observed. Therefore, theses periods are regarded as non-risk status. In this paper, we consider a special case where information on the observation gap is incomplete, that is, the termination time of observation gap is not available while the starting time is known. For a statistical inference, incomplete termination time is incorporated in terms of interval-censored data and estimated with two approaches. A shared frailty effect is also employed for the association between two recurrent events. An EM algorithm is applied to recover unknown termination times as well as frailty effect. We apply the suggested method to young drivers' convictions data with several suspensions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.585-588
• /
• 2007

We studied the effect of self-erase discharge on the luminous efficacy of ac PDPs. We observed through discharge current analysis to confirm that the selferase discharge occurred mainly between sustain cathode and address electrode, which have an influence on the luminous efficacy. The amount and timing of the self-erase discharge was varied to observe its effect on the luminous efficacy. It has been found that the luminous efficacy could be improved by the self-erase discharge when it is adjusted to occur right before the main discharge in the small gap structure. In the long gap structure, on the contrary, the luminous efficacy could be increased when the self-erase discharge is suppressed. Also, various waveforms to control self-erase discharge are suggested and tested in the panel experiments.

• 대한약리학회지
• /
• 제27권2호
• /
• pp.99-108
• /
• 1991

Racemic ketamine을 사용하여 개구리의 좌골신경 및 toe muscle에 대한 작용을 관찰하였다. 실험방법으로는 214 mM sucrose을 사용하여 서로 다른 두 종류의 투여 방법으로 세포막의 활동 전압에 대한 영향을 electric recording으로 관찰하였다. 즉, intracellular 투여는 single sucrose gap technique으로, extracellar 투여는 double sucrose gap technique을 사용하였으며 그 실험 결과는 아래와 같았다. 1. Racemic ketamine은 개구리의 좌골신경 및 toe muscle의 활동전압을 intracellular 및 extracellular 투여시 모두 의의 있게 억제하였다. 2. 개구의 toe muscle에서 $K^+$-수축을 억제하였다. 3. naloxone은 ketamine의 억제작용을 완전히 차단하지는 못하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.539-544
• /
• 1998

Generally, welding gap is a serious factor of a falling-off in weld quality among various kind of weld defect. Welding gap is created between two work piece in GMAW(Gas Metal Arc Welding) of horizontal fillet weld because surface of workpiece is not flat by cutting process. In these days, there were many attempts to detect welding gap. though we prevalently use the vision sensor or arc sensor in welding process, it is difficult to detect welding gap for improvement of welding quality. But we have a trouble to find relationship between welding gap and many welding parameters due to non-linearity of welding process. As mentioned about the various difficult problem, we can detect welding gap precisely using neural networks which are able to model non-linear function. Also, this paper was proposed real-time monitoring of weld bead shape to find effect of welding gap and to estimate weld quality. Monitoring of weld bead shape examined the correlation of welding parameters with bead eometry using learning ability of neural networks. Finally, the developed system, welding gap detecting system and bead shape monitoring system, is expected to the successful capability of automation of welding process by result of simulation.

• Water Engineering Research
• /
• 제3권1호
• /
• pp.31-44
• /
• 2002

The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.