• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.217-222
• /
• 2007

This paper describes a static gait generation process and a mechanical design process of leg mechanisms for quadruped robots. Actually robot walking is realized with the joint motion of leg mechanisms. In order to calculate the time-angle trajectories for each joint of leg mechanisms, we generate end-tip trajectories with time for each leg in the global inertial coordinate system intuitively, followed by coordinate transformations of the trajectories into the local coordinates system fixed in each leg, finally the angle-time trajectories of each joint of leg mechanisms are obtained with inverse kinematics. The stability of the gait generated in this paper was verified by a multi-body dynamic analysis using the commercial software $ADAMS^{(R)}$. Additionally the mechanical specifications such as gear reduction ratio, electrical specifications of motor and electrical power consumption during walking have been confirmed by the multi-body dynamic analysis. Finally we constructed a small quadruped robot and confirmed the gait.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.4
• /
• pp.465-473
• /
• 2011

Purpose : This study was to evaluate gait velocity and muscle activity on 3 different gait conditions in elderly women. Methods : There were one group was 20's generation(n=12), and the other group was over 60's generation (n=12). The velocity of gait was analysed for using the Footscan system, EMG(MP150) for muscle activity. Subjects were measured 3 gait condition(normal, obstacle-10cm, dual obstacle-10cm. Measured values were used by the independent t-test for analysing between groups, and repeated measurement of ANOVA for analysing within group. Results : The results were as follow: velocity and acticities of lower 4 muscles were significantly differences in experimental group. In control group, there were not significantly differences. Contrast-groups were significantly differences of velocity(obstacle, dual obstacle), muscle activities(soleus-dual obstacle, hamstring-all). Conclusion : These results indicate that elderly people are reduced gait ability in dual task, and obstacle gait. So Elderly women need to training obstacle/dual gait for preventing falling.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.107.4-107
• /
• 2002

One of the most important functions of a biped robot is to walk naturally like human. For the human being, toe is very important joint in order to walk naturally. Thus, for a biped robot, the existence of toe joint much affects gait pattern generation and contributes to natural walking, which is similar to the human gait or faster walking like running. Since a conventional biped robot has the feet which consist of soles without toes, it seems difficult to walk naturally. For realizing the gait to be similar to human one, toes are necessary to the biped robot. In this paper, the effect of the toe joint for gait pattern generation is studied. In order to find the effect of toe joint, a biped r...

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.203-208
• /
• 2003

In this paper, gait generation algorithm based on Linear Inverted Pendulum Mode is extended considering that the terrain is uncertain and flexible. Deformation of the soft terrain by the weight of the biped robot is taken into account to design the desired motion of the swing leg. Landing time disagreement caused by dynamics of the robot is also considered and a method to adjust gait is proposed. Results of numerical simulation show the effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.573-579
• /
• 2008

This paper introduces a new approach to develop a fast gait for quadruped robot using GP(genetic programming). Planning gaits for legged robots is a challenging task that requires optimizing parameters in a highly irregular and multidimensional space. Several recent approaches have focused on using GA(genetic algorithm) to generate gait automatically and shown significant improvement over previous results. Most of current GA based approaches used pre-selected parameters, but it is difficult to select the appropriate parameters for the optimization of gait. To overcome these problems, we proposed an efficient approach which optimizes joint angle trajectories using genetic programming. Our GP based method has obtained much better results than GA based approaches for experiments of Sony AIBO ERS-7 in Webots environment.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.239-245
• /
• 2013

Purpose: Osteoarthritis occurs in many different joints of the body, causing pain, stiffness, and decreased function. The knee is the most frequently affected joint of the lower limb. The aim of this study was to investigate the differences of biomechanics between independent gait and anterior walker dependent gait of patients with osteoarthritis of the knee. Methods: Lower limb joint kinematics and kinetics were evaluated in 15 patients with knee osteoarthritis when walking independently and when walking with an anterior walker. Participants were evaluated in a gait laboratory, with self-selected gait speed and natural arm swing. Results: When walking with a dependent anterior walker, participants walked significantly faster (p<0.01), using a longer stride length (p<0.01), compared to independent gait. When walking with a dependent anterior walker, participants exhibited significantly greater knee flexion/extension motion (p<0.01) and lower knee flexion moment (p<0.05) compared to independent gait. When walking with a dependent anterior walker, participants showed significantly greater peak ankle motion (p<0.01), ankle dorsiflexion/plantarflexion moments (p<0.01), and ankle power generation (p<0.05) compared to independent gait. Conclusion: These biomechanical properties of gait, observed when participants walked with a dependent anterior walker, may be a compensatory response to impaired knee function to allow sufficient power generation for propulsion. Therefore, rehabilitative strategies for patients with osteoarthritis of the knee are needed in order to improve not only knee function but also hip and ankle function.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.389-394
• /
• 2014

Two evolutionary gait generation methods for Cartesian and Joint coordinates space are compared to develop a fast locomotion for quadruped robots. GA(Genetic Algorithm) based approaches seek to optimize a pre-selected set of parameters for the locus of paw and initial position in cartesian coordinates space. GP(Genetic Programming) based technique generate few joint trajectories using symbolic regression in joint coordinates space as a form of polynomials. Optimization for two proposed methods are executed using Webots simulation for the quadruped robot which is built by Bioloid. Furthermore, simulation results for two proposed methods are analysed in terms of different coordinate spaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1166-1171
• /
• 2004

In this study, the concept of autonomous mobility is applied to a gait support mobile robot. The aim of the development of the service robot is to assist the elderly with gait rehabilitation. This study proposes an ergonomic service robot design parameter. The gait assistant path pattern is derived from analysis of the elderly gait. A lever is installed in the AMR in order to measure both the pulling force and the leading force of the elderly. The path generation of the mobile robot is developed through consideration and analysis of elderly gait patterns. The ergonomic design parameters (dimensions, action scope and working space) are determined based on moving scope of the elderly. The gait assistant mobile robot was offered the elderly guide service and internet service based on the ergonomic design parameters.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.617-623
• /
• 2012

In this paper, we propose a gait generation method for a quadruped robot to walk efficiently on the slope, which uses the waist joint of a quadruped robot. We derive the kinematic model of a quadruped robot with waist joint using the Denavit-Hartenberg representation method and the algebraic method. In addition, the gaits are generated based on the wave gait. In the proposed gait generation method, first in order to alleviate the mechanical restriction and the reduction of the stride, we determine the appropriate waist joint angle according to the slope degree, and then decide the location of the tiptoe of a quadruped robot by exploring the workspace. Finally, through computer simulations, we verify the effectiveness and applicability of the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1436-1443
• /
• 2013

A variety of studies on imitating the skeletal structure and the gait of legged animals have been done in order to develop walking robots which have an ability to adapt to atypical environments. In this paper, we analyzed the gait of a Bearded dragon lizard using the motion capture system, proposed a calibration scheme of the motion data and generated the trotting gait of a lizard based on the calibrated data. Also, we constructed the dynamic model based on the biometric data of a Bearded dragon lizard and applied the trotting gait of the lizard to the dynamic model. We verified the validity of the gait with the commercial dynamic simulation software.