• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.31-38
• /
• 1990

An antenna gain measurement system using an extrapolation technique is described. The technique is similar to the usual two-antenna method for absolute gain measurement system, but involves the measurement of the received signal as a function of seperation in short distances, and the signal-versus-seperation data is processed in a way that allows an extrapolation of the signal to "infinite" seperation. In this technique it is possible to obtain the near field gain as function of distance by combining the far field gain and a proximity correction factor. The results of gain measurements of standard gain horn antennas and OEG (open ended waveguide) antennas are also presented.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.406-413
• /
• 2019

This paper proposes a speech enhancement method through the process of combining the gain function with spectrum subtraction method in the two microphone array with close spacing. A speech enhancement method that uses a gain function estimated by the SNR (Signal-to Noise Ratio) based on the multi frequency band coherence function causes the performance degradation in high correlation between input noises of two channels. A new speech enhancement method is proposed where the weighted gain function is used by combining the gain function from the spectral subtraction. The performance evaluation of the proposed method was shown by comparison with PESQ (Perceptual Evaluation of Speech Quality) value which is an objective quality evaluation test provided by the ITU-T (International Telecommunications Union Telecommunication). In the PESQ tests, the maximum 0.217 of PESQ value is improved in the various background noise environments.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2003

Wide- and flat-gain laser diodes were designed and fabricated from asymmetric multiple quantum well (AMQW) structures which consist of three compressively strained InGaAsP wells of different thicknesses. For a 400 ${\mu}{\textrm}{m}$-long lasers with as-cleaved facets, -1 ㏈ and -3 ㏈ gain bandwidth were 45 nm and 80 nm, respectively. For this AMQW structure, calculated gain spectra with various line broadening functions were compared with experimental results. We confirmed the calculated gain spectra using an asymmetric line broadening function were in good agreement with the measured data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1793-1801
• /
• 1994

In this paper, a new method for predicting the 1 dB gain compression point of cascaded N amplifiers is proposed. With the proposed method, the transfer function of each amplifier is derived from scalar data available from the manufacturers data sheet and all transfer functions are producted with scalar in order to also derive the overall transfer function of the subsystem under the assumption that the input and output port of each amplifier are matched. Therefore, the 1 dB gain compression point of the subsystem can be predicted or estimated, reversely, utilizing the overall transfer function obtained with the proposed method. The proposed method can be used irrespective of the number of scalar data but, in this paper, it is analyzed only with two scalar data (linear power gain and 1 dB gain compression point) and three scalar data(linear power gain, 1 dB and 0.5 dB gain compression points). With two sample amplifiers operated in Ku-band, the predicted results by the proposed and previous method, respectively, and the experimental results are together presented in order to confirm its utility.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.263-269
• /
• 1998

We use the slope bounded saturation nonlinear feedback element instead of relay to find ultimate gain and period of linear plant. Saturation nonlinear element reduces the high harmonics of plant output. The reduction of high harmonics improve the accuracy of describing function method used to find ultimate gain and period. We give a simple procedure to find ultimate gain and period with saturation nonlinear element. A PID controller design method with known time delay element is also given, which is very useful when oscillation is not occurred with nonlinear element.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1281-1285
• /
• 2004

A line of Japanese quail selected for increased body weight for 15 generations (C) and an unselected control line (K) were used to examine the impact of selection for body weight on the growth curve of Japanese quail. In addition, the effect of sex on the growth curve in each line was also studied, namely females of C (CF), males of C (CM), females of K (KF) and males of K (KM). The monophasic and diphasic growth models were studied for adequacy in describing growth curves of quail in both sexes of the C and K lines. The monophasic function provided almost the same growth rate for both sexes in both lines. However, the growth rates calculated by means of the diphasic function differed between sexes for both lines, except for those calculated for C during the second growth phase. While there were 2-3 days difference between sexes in age at maximum gain in both lines with a monophasic model, the difference between sexes in the age at maximum gain in both lines became greater according to the diphasic model. There were 5 and 7 days difference between sexes in the age at maximum gain in line C for the first and second growth phases, respectively. A difference between sexes of 18 and 11 days in the age at maximum gain for the first and second phases, respectively, was estimated for line K when the diphasic function was fitted. The use of diphasic functions provides more detailed information on growth patterns. The results showed that the use of the diphasic function was better because it provided greater insights into understanding the biology of growth.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.632-634
• /
• 2000

The robust design of controllers to ensure gain and phase margin is can be use approximation of arctan function. In this paper, We proposed a tuning algorithm PID controllers based on specified gain and phase margin by a new approximation of arctan function. This method have linear interpolation equations of two arctan interval instead of one arctan interval of arctan(x). It is shown that the frequency response of this method was to ensure specified gain and phase margin.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.464-473
• /
• 2012

In this paper, we derive the gain of network coding when it is utilized for retransmission in wireless networks. To the end, we derive the outage probability of the network-coded transmission and express the diversity order as a function of the number of nodes and the node's listening probability. From the outage probability, we formulate the ${\epsilon}$-outage capacity. The network-coding gain is the ratio of the ${\epsilon}$-outage capacities between network-coded and non-coded transmissions. Under our system model, we find that the network-coding gain is a function of the diversity order. Moreover, when there are infinitely many nodes, we show that the network coding gain approaches $0.25{\epsilon}^{-1}$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.159-163
• /
• 2008

In this paper, a simplified type of adaptive controller using Nussbaum gain for the control of the spacecrapt with elastic appendages is suggested. This method doesn't need the information of the high frequency components in transfer function. While the pitch angle tracks the desired value by this method, the elastic modes are also stabilized. Only pitch angle and the pitch rate are used for the design of the output feedback controller. Especially all system parameters and the high frequency gain are assumed to be unknown. For design simplicity, a controller is designed by using only the linear part, and it's shown to satisfy the nonlinear system by the simulation with basic explanations. By using the Lyapunov function, the stability of the suggested algorithm is demonstrated, and also the effectiveness of the suggested algorithm is verified by showing the computer simulation results.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.66.2-66
• /
• 2003

A gain-of-function mutant, SHM-11 obtained through gamma-ray mutagenesis, is resistant to rice blast caused by Magnaporthe grisea while wild type Sanghaehyanghyella is highly susceptible to the same disease. The resistance in the mutant was not race-specific when we tested with four races (KJ-201, KI-1113a, KI-313, KI-409) of M. grisea. To identify genes involved disease resistance in the gain-of-function mutant, genes specifically expressed in the mutant were selected by suppression subtractive hybridization using cDNAS of blast-inoculated mutant and wild type as a tester and a driver, respectively, Random 200 clones from the subtracted library were selected and analyzed by DNA sequencing. The sequenced genes represented three major groups related with disease resistance； genes encoding PR proteins, genes probably for phytoalexin biosynthesis, and genes involved in disease resistance signal transduction. A gene encoding a putative receptor-like protein kinase was identified as highly expressed only in the gain-of-function mutant after blast infection. The role of the putative receptor-like protein kinase gene during blast resistance will be further studied.