• Animal Bioscience
• /
• v.35 no.6
• /
• pp.916-926
• /
• 2022

Objective: This study was conducted to evaluate the effects of medium chain triglycerides (MCT) with organic acids (OA) on growth performance, fecal score, blood profiles, intestinal morphology, and nutrient digestibility in weaning pigs. Methods: A total of 120 weaning pigs ([Yorkshire×Landrace]×Duroc) with an average body weight (BW) of 8.00±0.87 kg were assigned in five treatments considering sex and initial BW in 3 replications with 8 pigs per pen in a randomized complete block design. The experimental diets included a corn-soybean meal based basal diet with or without 0.1% or 0.2% MCT and 0.1% OA. The pigs were fed the diets for 5 weeks (phase 1, 0 to 2 weeks; phase 2, 3 to 5 weeks). A total of 15 barrows with an average BW of 12.48±0.37 kg were used to evaluate the nutrient digestibility by total collection method. The BW and feed intake were measured at the end of each phase. Blood samples and small intestine samples were collected at the end of each phase, too. Results: Supplementing 0.1% MCT with 0.1% OA showed greater BW for week 5 and average daily gain (ADG) for overall period than control diet. Supplementing 0.1% MCT increased (p<0.05) ADG and improved (p<0.05) gain:feed ratio for phase 1. Dietary MCT and OA did not affect the fecal score and blood concentration of cortisol, immunoglobulin G, tumor necrosis factor-α, interleukin-1β (IL-1β), IL-6, and IL-10 in weaning pigs. Pigs fed the diets with 0.1% MCT had greater (p<0.05) villus height of duodenum and ileum for phase 1. Also, pigs fed the diet with 0.1% OA showed greater (p<0.05) villus height and villus height to crypt depth ratio of duodenum for phase 2. There was no significant difference in nutrient digestibility and nitrogen retention of pigs. Conclusion: Addition of 0.1% MCT with 0.1% OA in weaning pig's diet improved growth performance partly by enhancing intestinal morphology in weaning pigs.

• Animal Bioscience
• /
• v.36 no.8
• /
• pp.1228-1240
• /
• 2023

Objective: This experiment was conducted to evaluate the effects of different levels of dietary crude protein (CP) on growth performance, blood profiles, diarrhea incidence, nutrient digestibility, and odor emission in weaning pigs. Methods: A total of 240 weaning ([Yorkshire×Landrace]×Duroc) pigs (8.25±0.050 kg body weight [BW]) were assigned to six treatments based on sex and initial BW, with five replicates of eight pigs per pen in a randomized complete block design. Experimental diets with different crude protein levels for early and late weaning phases were as follows: i) CP16, corn-soybean-based diet containing 16%/15% CP; ii) CP17, corn-soybean-based diet containing 17%/16% CP; iii) CP18, corn-soybean-based diet containing 18%/17% CP; iv) CP19, corn-soybean-based diet containing 19%/18% CP; v) CP20, corn-soybean-based diet containing 20%/19% CP; and vi) CP21, corn-soybean-based diet containing 21%/20% CP. Results: In the early weaning period, average daily feed intake increased when the dietary CP level decreased (linear, p<0.05). During the entire experimental period, average daily gain and the gain to feed ratio decreased when the dietary CP level increased (linear, p<0.01). Additionally, a decrease in dietary CP level resulted in a linear increase in final BW (linear, p<0.05). In the early and late weaning periods, blood urea nitrogen (BUN) decreased when the dietary CP level decreased (linear, p<0.01). There were no significant differences in creatinine, glucose, total protein, triglyceride or insulin-like factor-1 levels over the experimental period. The concentrations of immunoglobulin A (IgA) and IgG were not significantly affected by dietary CP levels during the experimental period. In the early weaning period, fecal and urine N decreased when the dietary CP level decreased (linear, p<0.01). No differences in nutrient digestibility among the treatments during the early weaning period were found. Throughout the whole experimental period, when the dietary CP level decreased in the weaning pig diet, the diarrhea incidence decreased linearly (linear, p<0.01). Throughout the whole experimental period, when the dietary CP level decreased in the weaning pig diet, ammonia, amines and hydrogen sulfide decreased linearly (linear, p<0.01). Conclusion: Reducing dietary CP could decrease diarrhea incidence, the concentration of BUN in serum and odor emission in manure. Furthermore, it could improve N excretion in feces and urine and growth performance in weaning pigs.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.565-582
• /
• 2018

We investigated the hydrochemical properties of ChusanYongchulso Spring located in Buk-myeon, Ulleung Island, focusing on the formation and characteristics of aquifers in and around the Nari caldera. Abundant pumice with high permeability and numerous fractures (including faults and joints) that formed as a result of caldera subsidence are widely distributed in the subsurface, favoring the formation of aquifers. Because of the presence of porous pyroclastic rocks with a high internal surface area, the water type of the springs is characterized by $NaHCO_3$, with upper stream waters and the upper spring being characterized by $NaHCO_3$ and NaCl, respectively. Components with a high coefficient of determination with EC are $HCO_3$, Na, F, Ca, Mg, Cl, $SiO_2$, and $SO_4$. The high concentrations of Na and Cl might be attributable to the main lithologies in the area, given that alkaline volcanic rocks are distributed extensively across Ulleung Island. Eh and pH, which are considered to be important indicators of water-rock interaction, are unrelated to most components. According to the results obtained from factor analysis, the variance explained by factor 1 is 54% and by factor 2 is 25.8%. Components with a high loading on factor 1 are F, Na, EC, Cl, $HCO_3$, $SO_4$, $SiO_2$, Ca, $NO_3$, and Mg, whereas components with a high loading on factor 2 are Mg and Ca, along with K, $NO_3$, and DO with negative loadings. It is suggested that the high concentrations of Na, Cl, F, and $SO_4$ are closely related to the presence of fine-grained alkaline pyroclastic rocks with high permeability and porosity, which favorintensewater-rock interaction. However, a wide-ranging investigation that encompasses methods such as geophysical prospecting and geochemical analysis (including isotope, trace-element, and tracer techniques) will be necessary to gain a better understanding of the groundwater chemistry, aquifer distribution, and water cycling of Ulleung Island.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.305-310
• /
• 2012

This work was carried out to investigate performance and carcass yield of large-type broilers at different stocking densities. Treatments were T1 (9.1 birds/$m^2$), T2 (10.3 birds/$m^2$) and T3 (11.5 birds/$m^2$) by the stocking density. Four hundred eight 1-day-old Arbor Acre broiler chicks were used for six weeks (starter, 0~1 wks; earlier, 1~3 wks; finisher, 3~6 wks) and divided into 3 treatments (4 replications/treatment, 30, 34 or 38 birds/replication). Research indexes were rearing viability ratio, body weight, body weight gain, feed intake, feed conversion ratio, production efficiency factor and carcass ratio. Rearing viability ratio (%) was 89% or more for all treatments and there was no significant difference on weekly rearing viability ratio (%). Body weight of T2 was the greatest and that of T3 was the lowest at 1 weeks old (P<0.05). Body weight gain of T2 was the greatest and that of T3 was the lowest at 0~1 weeks old (P<0.05). However, body weight gain of T3 was the greatest and that of T1 was the lowest at 1~2 weeks old (P<0.05). Body weight gain of T2 was the greatest as 3,031 g among treatments at 0~6 weeks old (P<0.05). Feed intakes of T1, T2 and T3 were 1,417 g, 1,265 g and 1,355 g, respectively, and that of T1 was the greatest among treatments (P<0.05). There was no significant difference on body weight, body weight gain and feed intake. Feed conversion ratio of T1 was the greatest among treatments at 1~2 wks, 3~4 wks and 0~6 wks old (P<0.05). Production efficiency factors of T1, T2 and T3 were 363.5, 388.3 and 358.3, respectively, and there was no significant difference among treatments. Wing meat ratio of T1 was the higher compared to other treatments at the age of 4 wk (P<0.05). There was no significant difference on carcass ratio and partial meat ratio among treatments. Neck meat ratio of T2 was the lowest among treatments (P<0.05). This result may provide the standard data of different stocking densities for large-type broiler and the further research is needed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.32-39
• /
• 2009

When adapting the transmitter to the channel state information(CSI), improved transmission is possible compared to the open loop system where no CSI is provided at the transmitter. However, since the perfect channel information is rarely available at the transmitter, the system design based on the partial CSI becomes an important factor. Especially, in mobile environments, the consideration for the outdated CSI should be applied for mitigating the performance degradation. In this paper, we propose a robust adaptive modulation and coding scheme for bit-interleaved coded orthogonal frequency division multiplexing over time-varying channels. With reasonable feedback overhead, the proposed scheme shows the enhanced performance by compensating for the outdated CSI due to Doppler spread. Simulation results confirm that the performance gain is achieved by applying an accurate BER estimation method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1214-1218
• /
• 2004

Data on 958 Karan Fries (KF) and 780 Karan Swiss (KS) cows, born during 1974 to 1992 at National Dairy Research Institute, Karnal were evaluated for causes of culling and their impact on milk performance and herd strength. Causes of culling were classified as voluntary culling (low milk yield) and involuntary culling (other than milk yield). The milk yield of cows was evaluated inretrospectively by estimating expected breeding value (EBV) on the basis of first lactation yield (FLY) and all available lactation yield (ALY). The culling rate of KF cows over the years varied from 10.89 (1988) to 33.92% (1991) with an overall average of 20.96% and in KS from 19.91 (1984) to 33.74% (1989) with an overall average of 25.01%. Reproductive disorders, teat and udder problems, low milk production, health and locomotive disorders were the major reasons of culling accounted respectively for 5.56, 4.97, 4.61, 3.18 and 2.24% of herd strength in KF cows. The corresponding causes of culling were 6.20, 6.26, 7.69, 1.49 and 2.67% of herd strength in KS cows. The involuntary culling of cows accounted for 82.4% in K F and 76.1% in KS cows of total culling. The average annual disposal rate in KF and KS was 26 and 30% whereas annual replacement rate was 24 and 26% respectively. The EBV of involuntary culled cows on the basis of FLY and ALY was 3,111 and 3,515 kg in KF; and 2,669 and 2,940 kg in KS cows respectively. The EBV of selected cows on the basis of FLY and ALY was 3,242 and 3,549 kg in KF and 2,893 and 3,245 kg in KS cows respectively. The average breeding value of involuntary culled cows was not significantly different from selected cows in both the herds. The high rate of involuntary culling of potential cows might be major factor responsible for declined performance and size in these herds. The results indicated that higher genetic gain (2.14% of herd average in KF and 3.49% of herd average in KS) could be obtained by restricting the involuntary culling (50% of total culling) through improved management practices and increasing replacement rate.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.57-65
• /
• 2007

Effects on the stiffness of the embankment and sandmat on the construction safety of road embankment was investigated in this study by the numerical experiments using FEM. Two points was mainly focused in this study especially. First the deformation characteristics by the change of the stiffness of sand mat and embankment was investigated by the analyzing the consolidation settlement at the center of the embankment and the lateral displacement at the toe of the embankment. And, the effect of the stiffness on the stress distribution characteristics was also investigated in this study. Furthermore, slope stability analysis was carried out to gain the safe factor by change the stiffness of the sandmat and the embankment. The objective of the study is supplying the result of the numerical experiments for the geotechnical engineers who use the FEM for the safety design of the soil structures. As a result, the stiffness of the superstructures greatly affects on the deformation characteristics both in consolidation settlement and lateral displacement. However, it can be aware that it is not dominants to the stress distribution in the aspect that the no changes in the residual excess pore water pressure. Therefore, the decision of the stiffness has to be carried out deliberately considering not only the consolidation the magnitude of the settlement and the lateral displacement, but the slope stability.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.151-159
• /
• 2005

The errors generated from current measurement paths are inevitable, and they can be divided into two categories: offset error and scaling error. The current data including these errors cause periodic speed ripples which are one and two times the stator electrical frequency respectively. Since these undesirable ripples bring about harmful influences to motor driving systems, a compensation algorithm must be introduced to the control algorithm of the motor drive. In this paper, a new compensation algorithm is proposed. The signal of the integrator output of the d-axis current regulator is chosen and processed to compensate for the current measurement errors. Usually the d-axis current command is zero or constant to acquire the maximum torque or unity power factor in the ac drive system, and the output of the d-axis current regulator is nearly zero or constant as well. If the stator currents include the offset and scaling errors, the respective motor speed produces a ripple related to one and two times the stator electrical frequency, and the signal of the integrator output of the d-axis current regulator also produces the ripple as the motor speed does. The compensation of the current measurement errors is easily implemented to smooth the signal of the integrator output of the d-axis current regulator by subtracting the DC offset value or rescaling the gain of the hall sensor. Therefore, the proposed algorithm has several features: the robustness in the variation of the mechanical parameters, the application of the steady and transient state, the ease of implementation, and less computation time. The MATLAB simulation and experimental results are shown in order to verify the validity of the proposed current compensating algorithm.

• The Research Journal of the Costume Culture
• /
• v.21 no.3
• /
• pp.376-393
• /
• 2013

In modern society, culture is an important factor to form a country's image and identity and a representative content to generate revenue. Culture is a keyword to design life in the 21st century and has become competitiveness between countries. As a cultural content with international competitiveness, this study performed textile design development with the use of relics from the Tomb of King Muryeong, which is the tumulus of King Muryeong who was the 25th king of Baekje among Korean history. The developed design could be applied to the production of various fashion cultural products such as clothes, scarf, neck-tie, and bag. The process for the design development was carried out as follows: As a first step, this study found basis as a cultural content with a global sense that could form the historical value of the Tomb of King Muryeong and gain global sympathy of people all over the world through literature reviews. As a second step, this study examined the current state that traditional Korean elements were used as a fashion cultural products. As a third step, this study analyzed the current state and problems of fashion cultural products using relics from the Tomb of King Muryeong through field survey. As a final step, this study planned the concept of design with the use of diadem ornaments, earring, sword, stone guardian animal, and bricks with lotus-flower design from the tomb of King Muryeong. And these developed 6 textile designs could be applied to the production of various fashion cultural products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.306-313
• /
• 2015

In this study, the change of optical characteristics was studied according to the micro optical pattern provided by photo lithography followed by thermal reflow process. The shape and luminance variation with micro pattern was evaluated by SEM and spectrometers. Also, we analyzed the luminance characteristics using the 3D-optical simulation (Optis works) program. As a result, we found that the radius of curvature(R) in micro pattern is decreased up to 77%($150^{\circ}C$) compared to the radius of curvature at the condition $100^{\circ}C$, which is caused by efficient reflow of organic material without chemical changes. The highest enhancement of brightness with optimum micro pattern was obtained at the condition of $120^{\circ}C$ reflow process. The brightness gain with optical micro patterns is more than 15% at the condition of R=16.95 um, ${\Theta}=77.14^{\circ}$ compared to original optical source. The results of light simulation with various radius of curvature and side angle of pattern shows the similar result of experiment evaluation of light behavior on optical micro patterns. It is regarded that the more effect on light enhancement was contributed by side angle which is effective factor on light reflection, rather than the curvature of micro-patterns.