• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.3-4
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.51-52
• /
• 2006

Gabion can be used for the purpose of preventing overflow of river and side loss of road. However the manufacturing process of the gabion is manually controlled especially to the joining process at the terminal part of gabion with small diameter wire. In this paper automatic feeding guide system was designed and fabricated to make automation. The fabricated system was tested in the factory level. Pneumatic system was considered as the main idea of the feeding system. 3/2-way and 5/2-way manual control valve, eight double-acting cylinders were used. Based on the theoretical simulation and actual test the fabricated system was well controlled. The system was applied to the patent.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1099-1102
• /
• 2007

This paper presents eco-friendly planting method to overcome the problems of existing concrete retaining wall and gabion retaining wall, respectively, based on the examination on existing concrete and gabion retaining wall. Prior to doing this, proper design method was provided through pull out test. Planting method using gabion metal net and L shape green net retaining wall were compared and analyzed. According to this study, it is confirmed that reduction of construction period and economical profit in construction can be achieved by both manufacturing at the factory and self procurement at the job site as well as the use of metal net, which is applied as a substitution of existing strengthening material. For the effect of planting method, the use of L shape green net retaining wall shows superiority to environment-friendly gabion retaining wall in its ability to rootage and germination of the grass. The L shape green net retaining wall had excellent performance in helping rootage of grass and prevention of soil leakage, and even if raining period, remarkable damage of planting mat does not occur when planting mat is applied.

• 대한공업교육학회지
• /
• 제31권1호
• /
• pp.211-225
• /
• 2006

개비온은 일반적으로 도로 유실 방지나 사방공사용으로 사용된다. 그러나 개비온의 끝단과 소둔선의 결합은 수동 작업으로 이루어지고 있다. 본 논문에서는 개비온 끝단을 소둔선과 자동으로 결합하기 위한 자동 이송 가이드 장치를 개발하고 이를 시험하였다. 자동 이송 가이드 장치는 공압 회로를 이용하여 설계하고 실린더의 이송 변위를 시뮬레이션 하였다. 이송 가이드 장치는 주로 3/2 방향 수동제어밸브와 5/2 방향 수동제어밸브 그리고 8개의 복동 실린더를 사용하였고 공압 회로를 완성하여 실제 제작하였다. 이송 장치의 한 사이클 작동시간은 46.48초로 계측되었고 가이드 장치의 작동으로 인한 작업장내의 추가적인 환경소음진동의 유발은 없는 것으로 나타나 제작된 장치가 설계사양을 만족함을 검증하였다. 본 결과는 2006년도에 특허출원 되었다.