Browse > Article

Development of Transportational Guide System for Joining Small Wire with Gabion  

Lee, Jong kil (Andong National University)
Kin, Jong-Tae (Major in Mechanical Engineering Education, Graduate School of Education, Andong National University)
Publication Information
대한공업교육학회지 / v.31, no.1, 2006 , pp. 211-225 More about this Journal
Abstract
Gabion can be used for the purpose of preventing overflow of river and side loss of road. However the manufacturing process of the gabion is manually controlled especially to the joining process at the terminal part of gabion with small diameter wire. In this paper automatic feeding guide system was designed and fabricated to make automation. The fabricated system was tested in the factory level. Pneumatic system was considered as the main idea of the feeding system. 3/2-way and 5/2-way manual control valve, eight double-acting cylinders were used. The system took 46.48 seconds during a cycle. Additional environmental noise and vibration were not detected when the machine operated at the working area. Based on the theoretical simulation and actual test the fabricated system was well controlled. The system was applied to the patent in 2006.
Keywords
Gabion; Pneumatic circuit; Double-acting cylinder; 3/2-way manual control valve; 5/2-way manual control valve; Frequency spectrum;
Citations & Related Records
연도 인용수 순위
  • Reference
1 손성용 외 3인(1988). 공압회로 설계 및 시뮬레이션을 위한 소프트웨어 개발. 한국자동제어학술회의 논문집, 305-309
2 홍준희, 함승덕(1997). 생산 자동화. 서울: 대광서림
3 김장호(1987). 공압을 이용한 자동포장장치. 한국자동제어학술회의 논문집, 335-339
4 이종길, 이인구(2006). 개비온 자동 이송자이. 대한민국 특허출원, 출원번호 10-2006-0034230
5 박용일, 이찬주, 최정학(2004). 전기공압제어. 서울:성안당
6 김장호(1986). 공압에 의한 단위기계의 자동화. 한국자동제어학술회의 논문집, 1, 678-681
7 Close, C. M. and Frederick, D. K. (1993). Modeling and Analysis of Dynamic Systems, Houghton Mifflin Co.
8 김장호(1980). 공압을 이용한 자동화의 원가절감. 한국기계산업진흥회 연구보고서
9 신홍열, 이재원(1997). 공압설계를 위한 전문가 시스템. 한국전문가시스템학회지, 3(1), 13-30
10 어윤범 외 1인(1996). 수직 공압 엑츄에이터의 실시간 위치 서보 제어. 대한기계학회 추계학술대회논문집 A, 765-770
11 김학식, 정광영 (2003). 공압기술 모듈교재 개발 및 웹 컨텐츠연계학습 연구. 대한공업교육학회지, 28(1), 127-138
12 주해호, 서재경(1986). 공압 구동장치 해석을 위한 마이크로 컴퓨터 시뮬레이션에 관한 연구, 대한기계학회논문집, 10(6), 845-851
13 김동수 외 3인(2002). 공압 로드레스 실린더 성능 특성 해석. 2002년도 기계관련 산학연 연합심포지엄, 1189-1194
14 이판국, 함효준(2001). 자동화 시스템의 보수유지에 관한 연구. J. of the Korean Institute of Plant Engineering, 6(1), 101-110