• Korean Journal of Ecology and Environment
• /
• v.34 no.3 s.95
• /
• pp.223-238
• /
• 2001

Longitudinal distribution of the fish fauna of the 20 main channel and tributary sites in the Nakdong River was investigated from July 1999 to December 2000. A total of 4,791 individuals of fisHes were collected from three to seven sampling programs of all study sites and 48 species of 17 families were collected. Dominant family was Cyprinidae (25 species, relative abundance (RA): 91.8%). Zacco platypus (RA: 18.0%) was found to be the most abundant inhabitant. Subdominant species were Opsariichthys bidens (17,1%), Squalidus chankaensis tsuchigae (13.2%), Hemibarbus labeo (9.9%), and Z. temmincki (8.2%). Among the total species, 12 species were identified as endemic species (4 families, 24.5% of 1,172 individuals). Four exotic fishes were collected (Carassius cuvieri, 25 indv.; Micropterus salmoides, 214 indv.; Lipomis macrochirus, 14 indv.; Oreochromis niloticus, 6 indv.). M. salmoides was distributed in mid to lower part of the Nakdong River. As the result of cluster analysis, sampling sites were divided into three groups (upper, middle and lowerpart). Site below Gumi (St. 10) were considered as the lower part of the Nakdong River. Combined with previous surveys, about 80 species are present in the main channel and tributaries of the Nakdong River. Since the middle of 1990s, population density of the M. salmoides rapidly increased in the stagnant lower part of the river(RA 8.8% in lower 5 sites). The feeding strategy of M. salmoides was "generalized" on Daphnia sp. (<100 mm), and "specialization" about Cladocera (<150 mm) and Insecta(<200 mm).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.115-121
• /
• 2012

Sapphire single crystals have been highlighted for epitaxial gallium nitride films in high-power laser and light emitting diode (LED) industries. Among the many crystal growth methods, the Kyropoulos process is an excellent commercial method for growing larger, high-optical-quality sapphire crystals with fewer defects. Because the properties and growth behavior of sapphire crystals are influenced largely by the temperature distribution and convection of molten sapphire during the manufacturing process, accurate predictions of the thermal fields and melt flow behavior are essential to design and optimize the Kyropoulos crystal growth process. In this study, computational fluid dynamic simulations were performed to examine the effects of the crucible geometry aspect ratio on melt convection during Kyropoulos sapphire crystal growth. The results through the evolution of various growth parameters on the temperature and velocity fields and convexity of the crystallization interface based on finite volume element simulations show that lower aspect ratio of the crucible geometry can be helpful for the quality of sapphire single crystal.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.1
• /
• pp.1-6
• /
• 2014

Purpose: This study was designed for identification of the main clinicopathological features of cysts in the oral and maxillofacial regions. Methods: A retrospective observational study was conducted on 164 patients who had been diagnosed with cyst of the jaw, from the database of 168 histopathological diagnoses at the Department of Oral and Maxillofacial Surgery of Busan Paik Hospital at Inje University, from January 2009 to December 2011. The subjects were treated and the following variables were recorded: gender, age, clinical signs and symptoms, histopathological distribution, treatment methods, and complications. A descriptive analysis of the study variables was performed using a chi-square test. Results: Among the 164 patients, there were more male than female patients (male-female ratio: 1.7:1). The most predominant ages were the 20s and 40s. Among the classes of pathological cysts, radicular cysts and dentigerous cysts were the most common, with incidences of 56.0% and 35.1%. Thirty-six percent of the patients had no symptoms; and of those who had symptoms, the main signs and symptoms were swelling (24.4%) and pain (17.1%). The most frequent management method was the combination operation, such as enucleation with or without extraction and apicoectomy of the causative teeth. Of the 164 patients, 13 had complications; and one patient who had been treated with enucleation with apicoectomy had a recurrent cyst. Conclusion: Using a chi-square test, no significant differences in prevalence were observed in relation to gender according to age. Comparative analysis of radicular and dentigerous cysts showed a significant difference in their prevalence according to their anatomical location, however, no significant differences in were observed in their incidence rates according to age.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.296-296
• /
• 2014

We investigate experimentally and theoretically the splitting of surface plasmon (SP) resonance peaks under TE- and TM-polarized illumination. The SP structure at infrared wavelength is fabricated with a 2-dimensional square periodic array of circular holes penetrating through Au (gold) film. In brief, the processing steps to fabricate the SP structure are as follows. (i) A standard optical lithography was performed to produce to a periodic array of photoresist (PR) circular cylinders. (ii) After the PR pattern, e-beam evaporation was used to deposit a 50-nm thick layer of Au. (iii) A lift-off processing with acetone to remove the PR layer, leading to final structure (pitch, $p=2.2{\mu}m$; aperture size, $d=1.1{\mu}m$) as shown in Fig. 1(a). The transmission is measured using a Nicolet Fourier-transform infrared spectroscopy (FTIR) at the incident angle from $0^{\circ}$ to $36^{\circ}$ with a step of $4^{\circ}$ both in TE and TM polarization. Measured first and second order SP resonances at interface between Au and GaAs exhibit the splitting into two branches under TM-polarized light as shown in Fig. 1(b). However, as the incidence angle under TE polarization is increased, the $1^{st}$ order SP resonance peak blue-shifts slightly while the splitting of $2^{nd}$ order SP resonance peak tends to be larger (not shown here). For the purpose of understanding our experimental results qualitatively, SP resonance peak wavelengths can be calculated from momentum matching condition (black circle depicted in Fig. 2(b)), $k_{sp}=k_{\parallel}{\pm}iG_x{\pm}jG_y$, where $k_{sp}$ is the SP wavevector, $k_{\parallel}$ is the in-plane component of incident light wavevector, i and j are SP coupling order, and G is the grating momentum wavevector. Moreover, for better understanding we performed 3D full field electromagnetic simulations of SP structure using a finite integration technique (CST Microwave Studio). Fig. 1(b) shows an excellent agreement between the experimental, calculated and CST-simulated splitting of SP resonance peaks with various incidence angles under TM-polarized illumination (TE results are not shown here). The simulated z-component electric field (Ez) distribution at incident angle, $4^{\circ}$ and $16^{\circ}$ under TM polarization and at the corresponding SP resonance wavelength is shown in Fig. 1(c). The analysis and comparison of theoretical results with experiment indicates a good agreement of the splitting behavior of the surface plasmon resonance modes at oblique incidence both in TE and TM polarization.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.221-229
• /
• 1989

This study is conducted to evaluate the effect of KIM-112 (Ca-3, 5-diode-4-propyonly-cyclohexane-1-carboxylate) application at 13, 8 and 3 days before heading for the possibility of lodging prevention, growing pattern of several organisms, growth and yield in paddy rice. KIM-112 was the most effective in reducing elongation of the third internode when it was applied at 13 days before heading(13DBH) and the second internode when it was applied at 8DBH and 3. KIM-112 gradually inhibited internode elongation of rice with increase in dosage starting from 1.0ga.i./10a. The culm length shortened by 7-17% at 3DBH. The maximum distribution of leaf blade at canopy structure was positioned higher on KIM-112 application than on untreated. Lodging index decreased by 8-47% on KIM-112 application and field lodging degree(0-5) was 5 at untreated but KIM-112 application was only 1.3-2.0 of 3 DBH and was little lodging of 8-13 DBH. Ripened grain ratio of KIM-112 application were higher than those of untreated. Yield increased by 27-37% at KIM-112 application.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.509-515
• /
• 1998

Activated coffee chars were prepared from coffee waste by chemical activation with zinc chloride. In this study, the following processes were carried out ; roasting step, carbonization step, chemical activation step, and washing and drying step. The roasting step of coffee waste was carried out at $300{\sim}400^{\circ}C$ for 10 minutes. The optimum condition of carbonization was at $650^{\circ}C$ for 1 hour. The most important parameter in chemical activation of coffee char was found to be the chemical ratio of activation agents. Activated coffee chars prepared by various activation methods were characterized in terms of the nitrogen BET surface area, the BJH pore volume and pore size distribution at 77 K. The $N_2$-BET surface areas and total pore volume of coffee chars prepared by the chemical activation with $ZnCl_2$ were determined as about $1110{\sim}1580m^2/g$ and $0.51{\sim}0.81cm^3/g$, respectively. Scanning Electron Microscopy (SEM) was used to observe the porosity and surface of activated coffee chars. From the results of SEM analysis, it was shown that active surface and many pores were formed after the chemical activation. The preparation of the activated coffee char from coffee waste was successfully carried out, which previews a possibility for exploitation of resources by recycling the waste.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.249-258
• /
• 2006

In this letter, we propose a novel printed helix antenna for RFID reader in UHF band. The printed strip line of the antenna is first wound up outside a polygonal shaped layer and then the winding continues on an inner layer to control the overall gain and the radiation pattern. In addition, the winding pitch angles on each layer have either negative or positive values resulting in the broad CP bandwidth. The detail structure of the antenna was optimized using Pareto genetic algorithm(GA), so as to obtain excellent performances for RFID reader antennas. The optimized two-layered polygonal helix was fabricated on the cardboard of a flexible substrate and the performances were measured and compared with the simulations. The fabricated antenna was made up of copper tape which can adhere to a flexible cardboard and had 21.4 % matching bandwidth, 31.9 % CP bandwidth, readable range of $5.5m^2$ with kr=3.2. Also based on the current distribution of the strip line of the antenna and sensitivity of the antenna bents points, we confirmed that the antenna has the quarter-wave transformer near the feed for the broad matching bandwidth and radiates the traveling wave for the broad CP bandwidth using the bent strip line.

• Korean Journal of Veterinary Service
• /
• v.35 no.2
• /
• pp.119-128
• /
• 2012

This study was performed to investigate the freshness and nutritive components of eggs from Incheon area. The eggs of 64 brands collected from 7 hypermarkets and 6 brands collected from farms were examined to test the Haugh unit (HU), egg yolk index and specific gravity. HU and specific gravity were higher in farm eggs than in hypermarket eggs (P<0.05), and there was no difference in the egg yolk index. Among hypermarket eggs, HU and egg yolk index were higher in the graded eggs than in non-graded eggs (P<0.05), and specific gravity was not different between them. HU and egg yolk index of the eggs collected in March were higher than those in August (P<0.05). To monitor the bacterial contamination, total coliforms, total bacterial counts (TBC) and Salmonella enteritidis were examined. Salmonella enteritidis and total coliforms were not detected from all eggs. TBC of farm eggs were less than $10^1$ CFU/mL in all samples and TBC of hypermarket eggs were less than $10^1$ CFU/mL in 187 samples, $10^1{\sim}10^2$ CFU/mL in 3 samples and $10^3{\sim}10^4$ CFU/mL in 2 samples, respectively. Antimicrobial residues were not detected from all eggs tested. The vitamin E contents in the vitamin E enriched eggs from 6 brands hypermarket were 1.98~22.96 mg/yolk100 g ($14.04{\pm}8.81$ mg/yolk100g), and those of 5 brands among them were higher than the average of ordinary eggs. In one brand egg, vitamin E content was lower than the average of ordinary eggs. The vitamin E contents of ordinary eggs were 1.75~16.36 mg/yolk100 g (average $5.57{\pm}2.76$ mg/yolk100 g) and there were no price differences between vitamin E enriched eggs and ordinary eggs. In the contents of vitamin E, docosahexaenoic acid (DHA) and cholesterol, there were no significant differences according to the price. These results suggests that egg production, distribution, and management system should be improved for supplying fresh eggs to consumers at reasonable prices.

• Journal of dental hygiene science
• /
• v.6 no.1
• /
• pp.35-39
• /
• 2006

objective: The purpose of this study was to investigate job satisfaction of dental hygienist who were employed at the private dental clinic in Ulsan, Korea methods: The date obtained from some dental hygienists during 1 month. the survey was performed by face-by-face interview questionnaire consisting of 23 items and 6 point Likert type response format. The respondents were 77 from dental hygienists. The adjusted response rate was 88.5%(77/87). Data were analyzed using frequency distribution, independent T-test, ANOVA, chi-square and correlation. all statistical analyzed were conducted using Statistical Package for SPSS 11.5 result: In each factorial duty contentment, the level of the self-conceit from their own job was the highest. on contrary, the level of their monthly earnings was the lowest. In such a case as there was experience to move to another dental hospital, the job satisfaction was higher than nothing to move. conclusion: The dental hygienist who is in charge of protecting and hygiene of the teeth and the disease of oral has much influence of oral health. job satisfaction the dental hygienists have for their own job can influence themselves and even patients. So, making the job satisfaction higher is necessary to improve the quality of general dental hygiene.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.2
• /
• pp.171-184
• /
• 2005

In order to investigate correlation between mother's dental ca re for her children and their dental caries, this study was conducted wi th the dental examination record of 365 children who showed the same number of questionnaires with those examined for dental conditions and questionnaires written by mothers among children between three and six years of age and their mothers in Yeoncheon, Gyeonggi province in June 2004 to estimate frequency and percentage of general properties of subjects and mother's oral health care behaviors for her children by research items, to carry out cross-tabulation analysis and correlation analysis following Chi-square distribution for the presence of dental caries in deciduous teeth and oral health care behaviors, and to use decision tree analysis among data mining techniques for those factors associated with the presence of dental caries in deciduous teeth, and drew the following conclusions. 1. For mother's oral health care behaviors and attitudes for her children, 225 mothers(61.6%) confirmed their children's teeth-brushing; 278(76.2%) used no fluorine; and 286(78.6%) observed their children's teeth, 322 mothers(88.2%) instructed their children in teeth-brushing while 268 (73.4%) provided dental care, 232 mothers(63.7%) treated their children's cavity; 290(79.4%) believed that their children had good dental conditions; and 294(80.5%) answered that they began to provide their children with dental care in deciduous teeth. 2. As for the presence of dental caries in deciduous teeth and dental health care behaviors, there were statistically significant differences in employment, confirmation after teeth-brushing, teeth observation, instruction in time for teeth-brushing, use of fluorine, cavity treatment, time for dental care, and perception of dental conditions(p<0.05). 3. As for correlation between dental caries in deciduous teeth and oral health care behaviors, mothers who worked, who believed that their children didn't have good dental condition, and who thought that it was necessary to begin to provide dental care in permanent teeth were found to get their children to suffer from dental caries in deciduous teeth. Besides, those who failed to confirm teeth-brushing, who used no fluorine, and who failed to observe teeth and gave no instruction in time for teeth-brushing were shown to get their children to suffer from dental caries in deciduous teeth. 4. Variables to determine the presence of dental caries in deciduous teeth were classified by cavity treatment, mother's employment, time for dental care, and observation of children's teeth. The first node to determine the presence of dental caries in deciduous teeth was found to be cavity treatment; the next criteria for classification after cavity treatment were shown to be mother's employment and time for dental care. In case of children with no cavity, they were found to be mother's employment and teeth observation.