• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.645-654
• /
• 2009

In this study, we present an efficient ambulatory speech audiometric system to detect one's hearing problems at an earlier stage as possible without his or her visit to the audiometric testing facility such in a hospital or a clinic. To estimate a person's hearing threshold level in terms of speech sound response in his or her local environment, a digital assistant(PDA) device is used to generate the speech sound with implementing audiometric Graphic User Interface(GUI) system. Furthermore, a supra-aural earphone is used to measure a subject's hearing threshold level in terms of speech sound by the compensating the transducer's gain by adopting speech sound calibration system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.514-519
• /
• 2011

Recently, the interest in technologies for a highly efficient powertrain, i.e. a variable displacement engine or a light weight car body, to improve the fuel efficiency of automobile saving the environment has been increased. However this trend deteriorates NVH performance of a vehicle and the use of a conventional engine mounting system becomes unsatisfactory. In order to solve this dilemma, an active engine mounting system that could isolate or cancel out vibrations occurred at the powertrain was suggested. In this paper, In order to optimize the electromagnetic active engine mount performance, the actuator of the engine mount through FEM analysis and optimal design, noise and elastomer testing of the prototype through the optimal design of actuators for the electromagnetic active engine mount on the impact of the performance improvement is verified.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2405-2407
• /
• 1998

Implementation of a process control language for a pager manufacturing is dealt in this paper. The pager manufacturing process is consisted of a tune and an exam part. In the tune part, three capacitor trimmers are tuned to optimize the state of the pager. In the exam part, message receiving status with the arbitrary calling is tested using a vision system. The program has the ability to reuse the address discarded in the exam part when the, pager testing is not working properly even though there exist the processing gaps between two processes. The system is composed of a personal computer(PC586) and TEM-cells, Flex pager testers, an oscilloscope, a camera, and actuators. Visual Basic running on the Windows 95 is used to implement the control software which has the GUI to make an operator convenient. The validity of applying the completed program to practical machines, which are developing in the KITECH, is shown by using the virtual machine.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.276-283
• /
• 2000

This paper presents the configuration of simulator for the functional test of TCMS on developing. This simulator is composed of three cabinets. There is equipped the TCMS system which have the same configuration of 1 train(SMG Line 7＆8) on the two cabinets. And there are equipped VME PC, VME CPU Board and I/F modules on the rest cabinet. This simulator has tow parts, which are user I/F part and Real-time signal processing part. We programed user I/F part with Visual C++ to support GUI function, and signal processing part with RTOS to support Real-Time signal processing. This simulator can produce all the signal and data for the TCMS functional testing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.498-509
• /
• 2010

In this paper, a waypoint guidance law Line Tracking algorithm is designed for testing an Unmanned Airship. In order to verify, we develop an autonomous flight control and test system of unmanned airship. The flight test system is composed FCC (Flight Control Computer), GCS (Ground Control System), Autopilot & Guidance program, GUI (Graphic User Interface) based analysis program, and Test Log Sheet for the management of flight test data. It contains flight test results of single-path & multi-path following, one point continuation turn, LOS guidance, and safe mode for emergency.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.763-765
• /
• 2004

본 논문은 임베디드 시스템의 제한된 자원을 효율적으로 사용할 수 있는 임베디드 소프트웨어의 개발을 위한 성능 측정 도구를 제안한다. 제안하는 성능 측정 도구는 편리한 GUI를 제공하는 호스트-타겟(host-target) 기반의 테스팅 환경이다. 제안하는 테스팅 도구는 타겟 머신에 맞는 테스팅 코드 생성을 위한 파싱 엔진과 호스트-타겟간 소스 코드와 결과의 전송 및 테스팅 수행을 위한 에이젼트 모듈로 구성된다. 또한, 문자 스트링 형태의 저수준 테스팅 결과를 API 형태로 변경하는 데이터 처리기와 API 형태의 결과 정보를 그래픽 형태로 출력하는 레포트 생성기를 포함한다. 본 테스팅 도구는 개발자에게 레포트 뷰(view)를 제공하여 빠른 성능 분석과 코드 수정을 지원하며, 효율적이고 신뢰성 있는 임베디드 기반 소프트웨어 개발의 기회를 제공할 것으로 기대된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.96-106
• /
• 2005

An integrated single-wafer processing tool, composed of multiple single wafer processing modules, transfer robots, and load locks, has complex routing sequences, and often has critical post-processing residency constraints. Scheduling of these tools is an intricate problem, and testing schedulers with actual tools requires too much time and cost. The Single Wafer Processor (SWP) simulator presented in this paper is to validate an on-line scheduler, and evaluate performance of integrated single-wafer processing tools before the scheduler is actually deployed into real systems. The data transfer between the scheduler and the simulator is carried out with TCP/IP communication using messages and files. The developed simulator consists of six modules, i.e., GUI (Graphic User Interface), emulators, execution system, module managers, analyzer, and 3D animator. The overall framework is built using Microsoft Visual C++, and the animator is embodied using OpenGL API (Application Programming Interface).

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.65-72
• /
• 2018

In this paper, we have studied how to reuse common data link software by applying software product line engineering. Existing common data link software performed different stages of design, implementation, and testing without sharing the accumulated knowledge of different developers. In this situation, developers agreed that sharing the assets of each project and reusing the previously developed software would save human and time costs. Even with the initial difficulties, the common Data Link is a continually proposed project in the defense industry, so we decided to build a product line. The common data link software can be divided into two domains. Among them, the initial feature model for the GUI software was constructed, and the following procedure was studied. Through this, we propose a plan to build a product line for core assets and reuse them in newly developed projects.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.45-58
• /
• 2007

This paper presents UI4GSD (User Interface for Grid Service Development) for grid service developers that provides an efficient and friendly development environment based on Globus Toolkit 4, Normally, implementing grid service requires special expert knowledge for Grid as well as programming, Moreover, grid service development as well as testing of the deployed service in the Globus container takes a long Time, which makes the grid service implementation very inefficient, However, UI4GSD can automatically generate a grid service interface file, a build file, and grid service class files as well as a client class file, using the information supplied by developers through GUI. In UI4GSD, a grid service is developed easily based on typical five step processes with required input data fed at each step. As, a result, UI4GSD can provide an easy and convenient development environment thereby increasing the efficiency and convenience in developing grid services.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.483-492
• /
• 2015

This thesis analysis the CARBO 3000 that is one of a $CO_2$ infuser and improve its effectiveness. The thesis designs H/W and S/W that controls the $CO_2$ infusing mass compared to the CARBO 3000. Specially the designed H/W has a newly CPU, LCD, a flow velocity controller, a solenoid valve and a flow sensor. Also the designed S/W is composed of GUI and the algorithm to control the $CO_2$ infusing mass. The designed and implemented the $CO_2$ Infuser in this thesis is tested for the performance. The commercial measuring sensor is used for the test. The testing results say that the designed and implemented the $CO_2$ Infuser in this thesis is much more accurate compared to the CARBO 3000 on $CO_2$ infusing.