• Journal of computational fluids engineering
• /
• v.14 no.4
• /
• pp.86-92
• /
• 2009

Nowadays, the development of microfluidic chip [i.e. biochip, micro-total analysis system ($\mu$-TAS) and LOC (lab-on-a-chip)] becomes more active, and the microchannels to deliver fluid by pressure or electroosmotic forces tend to be more complex like electronic circuits or networks. For a simple network of channels, we may calculate the pressure and the flow rate easily by using suitable formula. However, for complex network it is not handy to obtain such information with that simple way. For this reason, Graphic User Interface (GUI) program which can rapidly give required information should be necessary for microchip designers. In this paper, we present a GUI program developed in our laboratory and the simple theoretical formula used in the program. We applied our program to simple case and could get results compared well with other numerical results. Further, we applied our program to several complex cases and obtained reasonable results.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.223-225
• /
• 2001

This paper presents the draft design of power system analysis program based on Graphic User Interface(GUI). According to an increase the power system size, it is not easy for the user to handle the power system analysis program. The power system analysis program based on GUI is necessary in order to increase the productivity of power system analysis tasks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.431-437
• /
• 2003

In this paper, an approximate optimization program based on GUI(graphic user interface) environment is developed. This program is coded by using Fortran and Visual basic. Fortran is used to Progress approximate optimization process. Visual basic is used to make user environment for user to use conveniently. Inside of this program, it uses two independent programs. One is commercial program, ANSYS, and the other is optimization program, PLBA(Pshenichny-Lim-Belegundu Arora). The former is used to obtain approximate equation of stress and displacement of a structure. The latter is used to solve approximate optimization. This algorithm uses second-order information of a function and active set strategy. This program is connecting ANSYS and PLBA. And it progress the process repeatedly until it obtain optimum value. As a method of approximate optimization, sequential design domain(SDD) is introduced. SDD starts with a certain range which is offseted from midpoint of an initial design domain and then SDD of the next step is determined by optimal point of a prior step.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.4
• /
• pp.295-300
• /
• 2016

In the design of passive and active boring bars, the structural dimensions and shape of the vibration control boring bar are modified depending on the diameter and depth of the workpiece, which changes the dynamic behavior. Thus, the natural frequency, effective mass, and stiffness for the main structure of a tube-type boring bar need to be reset for each vibration control case. However, commercial finite element method (FEM) software and experimental modal analysis are mostly used at present despite being too time-consuming. To overcome the weaknesses of the two methods currently used for vibration control, we realized a graphical user interface (GUI) program for the modal analysis of a modified tube-type damping structure. The analysis results with the GUI program were compared to those with commercial FEM software in order to confirm the effectiveness of the former.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.491-495
• /
• 2002

To provide an easy operation of drift prediction model in SAR(search and rescue) mission a GUI program running on Windows environment has developed. Users can make choice of input data on the screen by just clicking the mouse and the prediction results of datum points and trajectories of vessels are drawn on the electric chart. The program contains both Leeway Equation model and Mathematical model. The FORTRAN language was used in programming and Lehay Winteraction 4.0 software was utilized for graphic presentation. The result of May, 2001 Busan field experiment was plotted with that of model prediction for demonstration purpose.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.265-272
• /
• 2003

The computer program for the accelerated life testing technique of a machine part under the service conditions is developed under the GUI environment so that the user can easily obtain the results by selecting the program module. Also, the theoretical backgrounds for the computer program and the procedures of the accelerated testing method are introduced by testing the specimens made of the stainless steel 316L under the high temperature and random loading. The reliability of the program is discussed by the experimental results of the fatigue life, age degradation and accelerated testing conditions.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.525-530
• /
• 2004

In this paper, the optimum design of tire sidewall contour consisted of double plies for improving automobile maneuverability and tire durability is considered and a GUI program is developed for the purpose of the practical design. Each improvement of maneuverability and durability depends on the cord tension and strain energy distribution of tire sidewall. Satisfing trade-off method, which requires the judgment of aspiration levels, is used for the multi-objective optimization problem. Also, this paper presents the application to the practical sidewall contour design with the GUI program developed using visual Fortran.

• Progress in Medical Physics
• /
• v.33 no.4
• /
• pp.172-179
• /
• 2022

Recently, tetrahedral phantoms have been newly adopted as international standard mesh-type reference computational phantoms (MRCPs) by the International Commission on Radiological Protection, and a program has been developed to convert them to computational tomography images and DICOM-RT structure files for application of radiotherapy. Through this program, the use of the tetrahedral standard phantom has become available in clinical practice, but utilization has been difficult due to various library dependencies requiring a lot of time and effort for installation. To overcome this limitation, in this study a newly developed TET2DICOM-GUI, a TET2DICOM program based on a graphical user interface (GUI), was programmed using only the MATLAB language so that it can be used without additional library installation and configuration. The program runs in the same order as TET2DICOM and has been optimized to run on a personal computer in a GUI environment. A tetrahedron-based male international standard human phantom, MRCP-AM, was used to evaluate TET2DICOM-GUI. Conversion into a DICOM-RT dataset applicable in clinical practice in about one hour with a personal computer as a basis was confirmed. Also, the generated DICOM-RT dataset was confirmed to be effectively implemented in the radiotherapy planning system. The program developed in this study is expected to replace actual patient data in future studies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.1-6
• /
• 2002

To provide an easy operation of drift prediction model in SAR(search and rescue) mission a GUI program running on Window environment has developed. Users can make choice of input data on the screen by just clicking the mouse and the prediction results of datum points and trajectories of vessels are drawn on the map. The program contains both Leeway Equation model and mathematical model. The FORTRAN language was used in programming and Lehay Winteracter 4.0 software was utilized for graphic presentation. The result of May, 2001 Busan field experiment was plotted with that of model prediction for demonstration purpose.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.23-27
• /
• 2002

Ocean pollution like as oil spill and red tide have occurred considerable and executing clean-up them. Rapid prediction of polluting area is necessary that efficiency clean-up. In this study, develop the program that clean-up worker could easy predict polluted area. This paper is introduced configuration and contents of ODM(oil diffusion modelling) which constructed with GUI(Graphic User Interface) system. ODM is consisted with pre, post and main process, and constructed on window process. So, clean-up worker easy operating program and confirm the result. Studying this program, the distribution of ocean pollutant and phase of ocean movement is shown without difficulty on a computer.