• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.12-17
• /
• 2010

The oil tanker ship over 150GRT must equip oil content meter which satisfy requirements of revised MARPOL 73/78. Online measurement of oil content in complex samples is required to have fast response, continuous measurement, and satisfaction of ${\pm}10ppm$ or ${\pm}10%$ error in this field. The research of this paper is to develop oil content measurement system using analysis of light transmission and scattering among turbidity measurement methods. Light transmission and scattering are analytical methods commonly used in instrumentation for online turbidity measurement of oil in water. Gasoline is experimented as a sample and the oil content approximately ranged from 14ppm to 600ppm. TSK Fuzzy Model may be suitable to associate variously derived spectral signals with specific content of oil having various interfering factors. Proposed Parallel TSK Fuzzy Model is reasonably used to classify oil content in comparison with other models. Those measurement methods would be effectively applied and commercialized to oil content meter that is key components of oil discharge monitoring control equipment.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.1-18
• /
• 1994

Kwangyang harbour has been developed very rapidly and has 20 berths including 2 for 250,000DWT bulk carriers at the terminal of Kwangyang Steel Company only. In addition to this, the port is developing a container terminal with 10 berths for 50,000GRT container ships, the construction of which is scheduled to be finished in the year 2000. Because of these development, it has been pointed out that the existing waterways are not wide and safe enough for the new large ships to be catered for. This work, therefore, aimed to examine the naviga-tional safety of the waterways of Kwangyang Harbour, and to suggest how to improve the existing water-ways for the large ships to be introduced in the near future. In examining the safety of the existing and newly suggested waterways, waterway design simulation methodology has been applied. From this study, it has been suggested that the No.4 navigational channel has to be dredged to the depth of 22.5 meters and used as an entrance channel only, while the No.3 channel is used as an exit channel. Additionally, a new waterway has been recommended to be established over the Myodo Island for the container ships which will use the new terminal, the width of which has been recommended to be 400 meters with 440 meters from the bend area.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.6
• /
• pp.256-263
• /
• 2007

For $P_B=50Torr,\;P_T=5401Torr,\;T_S=450^{\circ}C,\;{\Delta}T=20K$, Ar=5, Pr=3.34, Le=0.01, Pe=4.16, Cv=1.05, adiabatic and linear thermal profiles at walls, the intensity of solutal convection (solutal Grashof number $Grs=7.86{\times}10^6$) is greater than that of thermal convection (thermal Grashof number $Grt=4.83{\times}10^5$) by one order of magnitude, which is based on the solutally buoyancy-driven convection due to the disparity in the molecular weights of the component A ($Hg_2Cl_2$) and B (He). With increasing the partial pressure of component B from 20 up to 800 Torr, the rate is decreased exponentially. It is also interesting that as the partial pressure of component B is increased by a factor of 2, the rate is approximately reduced by a half. For systems under consideration, the rate increases linearly and directly with the dimensionless Peclet number which reflects the intensity of condensation and sublimation at the crystal and source region. The convective transport decreases with lower g level and is changed to the diffusive mode at $0.1g_0$. In other words, for regions in which the g level is $0.1g_0$ or less, the diffusion-driven convection results in a parabolic velocity profile and a recirculating cell is not likely to occur. Therefore a gravitational acceleration level of less than $0.1g_0$ can be adequate to ensure purely diffusive transport.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.187-194
• /
• 2007

In order to control and manage oil-tanker scrapped materials and wastes properly, the actual conditions and global trends of the treatment and the management of ship scrapped wastes were surveyed and some amendments to marine pollution prevention law of Korea were proposed. Global annual volume of scrapped ships was estimated to be about 22 million DWT and most of them were scrapped in 4 major ship scrap countries such as Bangladesh, China. India and Pakistan and in minor ship scrap countries such as Turkey, the Philippines, Indonesia and Vietnam. The industry of ship scrap has been mainly developed in developing countries or undeveloped countries rather than in advanced countries. Most of scrapped ships were found to be small or medium size below 1,000 GRT In Jellanam-Do and Jeju-Do of Korea. Most of ship scrap enterprise and all enterprises of collection, transfer, treatment and disposal for ship scrapped materials and wastes were shown to be small sized in Korea. The regulations and/or rules which shall prohibit or limit trans-boundary movement of overage oil-tankers for scrap from Korea to developing or undeveloped countries, and vice versa should be Included in marine pollution prevention law of Korea. the criteria of manpower and facilities for enterprise of ship scrap, and for enterprises of collection, transfer, treatment and disposal of ship scrapped materials and wastes should be stipulated in marine pollution prevention law of Korea. It is desirable to introduce the system or concept of recycle or reuse of ship scrapped materials and wastes on producer's responsibility into marine pollution prevention law of Korea.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2008

The metasedimentary rocks of the Nampo Croup consisting of metaconglomerates, metasandstones, phyllites are exposed in the area of the Daechcon beach and Maryangri, Seocheon-gun. Their typical metamorphic assemblages of Bt-Mus-Grt-Qtz (${\pm}Pl{\pm}Chl$) and Bt-Mus-Qtz (${\pm}Pl{\pm}Chl$) indicate that they have been under intermediate P/T type metamorphism and were metamorphosed to garnet zone grade of amphibolite-facies during the Daebo Orogeny. Pressure-temperature conditions of peak metamorphism estimated from geothermobarometries are $560{\sim}595^{\circ}C$, $6.9{\sim}8.2\;kb$ respectively. The results of K-Ar biotite age determination are $143.2{\pm}3.6\;Ma$, $122.6{\pm}2.4\;Ma$ and $124.8{\pm}2.4\;Ma$ and the last two ages are considered as the results of later-stage thermal perturbation. On the bases of the formation age of Daedong Supergroup of $187{\sim}172\;Ma$ (Han et al., 2006; Jeon et al., 2007) combined with the results of this study, the hypothetical model of tectonometamorphic evolution of the study area during Daebo Orogeny is proposed. Crustal thickening resulted from folding and duplexing of thrusts in the area initiated at around 175 Ma just after sedimentation of Nampo Croup. And then rapid cooling by normal faulting due to crustal extention followed immediately after the peak metamorphism to the closure temperature of biotite.

• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.19-37
• /
• 1991

This work aims to : establish a model of the container physical distribution system of Pusan port comprising 4 sub-systems of a navigational system, on-dock cargo handling/transfer/storage system, off-dock CY system and an in-land transport system : examine the system regarding the cargo handling capability of the port and analyse the cost of the physical distribution system. The overall findings are as follows : Firstly in the navigational system, average tonnage of the ships visiting the Busan container terminal was 33,055 GRT in 1990. The distribution of the arrival intervals of the ships' arriving at BCTOC was exponential distribution of $Y=e^{-x/5.52}$ with 95% confidence, whereas that of the ships service time was Erlangian distribution(K=4) with 95% confidence, Ships' arrival and service pattern at the terminal, therefore, was Poisson Input Erlangian Service, and ships' average waiting times was 28.55 hours In this case 8berths were required for the arriving ships to wait less than one hour. Secondly an annual container through put that can be handled by the 9cranes at the terminal was found to be 683,000 TEU in case ships waiting time is one hour and 806,000 TEU in case ships waiting is 2 hours in-port transfer capability was 913,000 TEU when berth occupancy rate(9) was 0.5. This means that there was heavy congestion in the port when considering the fact that a total amount of 1,300,000 TEU was handled in the terminal in 1990. Thirdly when the cost of port congestion was not considered optimum cargo volume to be handled by a ship at a time was 235.7 VAN. When the ships' waiting time was set at 1 hour, optimum annual cargo handling capacity at the terminal was calculated to be 386,070 VAN(609,990 TEU), whereas when the ships' waiting time was set at 2 hours, it was calculated to be 467,738 VAN(739,027 TEU). Fourthly, when the cost of port congestion was considered optimum cargo volume to be handled by a ship at a time was 314.5 VAN. When the ships' waiting time was set at I hour optimum annual cargo handling capacity at the terminal was calculated to be 388.416(613.697 TEU), whereas when the ships' waiting time was set 2 hours, it was calculated to be 462,381 VAN(730,562 TEU).