• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.344-349
• /
• 2006

A sublimation epitaxial method, referred to as the Closed Space Technique (CST) was adopted to produce thick SiC epitaxial layers for power device applications. We aimed to systematically investigate the dependence of SiC epilayer quality and growth rate during the sublimation growth using the CST method on various process parameters such as the growth temperature and working pressure. The etched surface of a SiC epitaxial layer grown with low growth rate $(30{\mu}m/h)$ exhibited low etch pit density (EPD) of ${\sim}2000/cm^2$ and a low micropipe density (MPD) of $2/cm^2$. The etched surface of a SiC epitaxial layer grown with high growth rate (above $100{\mu}m/h$) contained a high EPD of ${\sim}3500/cm^2$ and a high MPD of ${\sim}500/cm^2$, which indicates that high growth rate aids the formation of dislocations and micropipes in the epitaxial layer. We also investigated the Schottky barrier diode (SBD) characteristics including a carrier density and depletion layer for Ni/SiC structure and finally proposed a MESFET device fabricated by using selective epilayer process.

• Journal of Plant Biotechnology
• /
• v.35 no.2
• /
• pp.127-132
• /
• 2008

In bioreactor cultures of plants, inoculum density is an important factor affecting growth and proliferation of the plantlets. To maximize shoot growth and proliferation of grape rootstock '5BB' in bioreactors, inoculum density varied at 15, 30, 45 and 60 single nodes in a 3-liter scale balloon type bioreactor, respectively and cultured for 40 days. Results suggested that the growth and the photosynthesis of the plantlet were greatly affected by inoculum density in the bioreactor. The inoculum density of 45 nodes resulted in the greatest growth (910.4 mg/shoot FW, 764.4 mg/root FW) followed by 30 nodes. $CO_2$ assimilation rate, stomatal conductance, transpiration rate of the plantlet were also highest at the inoculum density of 45 nodes. Significant reduces in shoot and root growth (426.5 mg/shoot FW, 248.4 mg/root FW) were observed at the inoculum density of 60 nodes. When the inoculum density decreased by 15 nodes, plantlets were malformed due to hyperhydricity, resulting in the highest transpiration rate and the lowest $CO_2$ assimilation rate. The plantlets stressed by the inoculum density at 15 nodes and 60 nodes showed larger number and irregular shape of stomata compared to the plantlets inoculated with 45 nodes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Journal of Marine Life Science
• /
• v.7 no.2
• /
• pp.213-220
• /
• 2022

This study was conducted to investigate the effect of environmental factors such as water temperature and rearing density on the survival and growth of Litopenaeus vannamei under low salinity conditions. Overall, in the higher water temperature, the higher survival rate comes out and in the lower rearing density, the higher the survival rate does. In a study on feed efficiency, weight gain (WG) increased significantly as water temperature increased, and weight gain according to rearing density significantly decreased as rearing density increased. The growth rate of L. vannamei was faster when the water temperature was higher (water temperature 31℃) under low salinity conditions. In addition, in the evaluation of the growth rate according to the rearing density, it was confirmed that the growth rate was accelerated at a low rearinging density. It is believed that the results of this study will be usefully applied to the determination of the optimal rearinging density and breeding water temperature of L. vannamei in low salinity condition.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.46-57
• /
• 2001

This study was conducted to provide tending operation information for the effective management in unmanaged artificial forests of Pinus densiflora for. erecta, Pinus rigida, and larix leptolepis, based on the study of the comparison of tree growth pattern by residual stand density after thinning practices. Followings are summarized results of this study. 1. The diameter growth of residual trees was increased as residual stand density decreased by thinning practices in the stands of Pinus densiflora for. erecta, and Pinus rigida, and subcompartment (Ga) and (Na) of Larix leptolepis. The statistical analysis noted that the tree growth was significantly different by the residual stand density. 2. The height growth did not show corresponding results by stand density treatment pattern, which indicated that the height growth was not directly influenced by residual stand density, but by site quality of the stand. 3. The diameter increment for the last six years was proportionately increased in larger diameter classes and less dense stands.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.918-925
• /
• 2008

Controlling the light energy and major nutrients is important for high cell density culture of cyanobacterial cells. The growth phase of Anabaena variabilis can be divided into an exponential growth phase and a deceleration phase. In this study, the cell growth in the deceleration phase showed a linear growth pattern. Both the period of the exponential growth phase and the average cell growth rate in the deceleration phase increased by controlling the light intensity. To control the light intensity, the specific irradiation rate was maintained above $10\;{\mu}mol/s/g$ dry cell by increasing the incident light intensity stepwise. The final cell density increased by controlling the nutrient supply. For the control of the nutrient supply, nitrate, phosphate, and sulfate were intermittently added based on the growth yield, along with the combined control of light intensity and nutrient concentration. Under these control conditions, both final cell concentration and cell productivity increased, to 8.2 g/l and 1.9 g/l/day, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.444-451
• /
• 1999

The effect of individual density on the growth and survival of Laminaria japonica was experimentally evaluated. Four density treatments of young sporophytes (0.63 cm In maximum length) grown in the laboratory were transplanted to the southeastern coast of Korea and their survivorship and growth rate were measured twice a month from January to July, 1996. Plants showed higher survivorship at low density. Final densities at three lowest densities were similar, ranging from 34 to 38 inds${\cdot}100 cm^{-2}$. Planis at the highest density, however, suffered greater decline than at lower densities, and only 21 plants remained at the end of this study. Mean frond size (length and width) fluctuated throughout the study period at four densities. During the first two mouths after outplanting, mean frond size was negatively correlated with initial density, However, the size was density independent after three months. As stand density increased, size-frequency distribution through time tended to be more positively skewed. The 10 largest plants grew faster in frond size and attained larger size in the lower density. There was a positive relationship between plant size and relative growth rate (or survival). The slope of yield-density (Y-D) relationships at four densities ranged from -0.060 to -0.137. The study suggests that density can strongly affect the survival and growth of this alga. The density-dependent survival and growth patterns, however, were not strictly consistent with those of terrestrial plants.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.5
• /
• pp.372-379
• /
• 2013

The present study was investigated the effect of planting density on plant growth and yield of Panax ginseng C. A. Meyer. Sowing density is one of the most important factors affecting yield. The value of roots have affected by shape, color, weight and degree of disease injury in ginseng. Also, it needed to minimize elapsed time for 5 years including pre-planting field management and cultivation period. We were conducted to evaluate that planting densities and varieties on the growth, yield and missing rate. The direct sowing was treated seeds density as a four levels (seeds; 72, 90, 120, 144) and 10 different varieties with 3 years old ginseng roots. Root weight was significantly affected by planting density and variety, but the number of lateral root and yield were affected by only planting density. Growth index was related to variety and planting density. Also, Root shape index was affected by both varieties and planting densities. Suitable planting density and variety were 120 plant per 1.62 $m^2$ and Gopoong, respectively. Results showed that it was also a significant difference (p=5%) in variety of planting density on growth.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.123-129
• /
• 2011

To determine whether rearing density affects the hypermelanosis on the blind side (ambicoloration) of olive flounders Paralichthys olivaceus, we reared fry with an unpigmented non-eyed (blind) side in duplicate at densities of 150 individuals/$m^2$ (commercial production density: control) and 450 individuals/$m^2$ (high density group) for 90 days in 1-t dark-green fiberglass reinforced plastics (FRP) tank. We recorded feed intake, feed conversion efficiency (FE), growth and survival, and measured the ratios of staining blind-side area (staining area) and ambicolored fish every 30 days. Daily feed intake (DFI), feed conversion efficiency (FE), growth rate, condition factors, and survival rate were calculated at the end of the experiment. Although the FE was higher in the high-density compared to the control, the two density groups showed similar feed intakes, growth, and survival. The ratio of staining area as well as the ratio of ambicolored fish significantly were significantly higher in the high-density group than in the control from days 30 to 60, but significantly increased and evened out by the end of the experiment (P<0.05). In conclusion, we determined that rearing density is not the main cause of the blind-side hypermelanosis, but found that increasing the rearing density can accelerate the ambicoloration in olive flounders.

• Journal of the Korean Ceramic Society
• /
• v.28 no.10
• /
• pp.767-776
• /
• 1991

Effects of the additions of SiB4 as burnable poison to UO2 on the green density, densification, interdependence between density-grain growth and microstructure of sintered UO2 were studied. UO2 pellets were sintered in flowing hydrogen, at temperature 1200, 1350, 1500, and 168$0^{\circ}C$ for 3 hours and at 168$0^{\circ}C$ for 0, 1, 3, and 10 hours, respectively. Green densities were in the range of about 4.5~5.4 g/㎤, and decreased as the amount of SiB4 increased when green pellets were made by with use of a double action press at 1000 kg/$\textrm{cm}^2$. The density of sintered UO2 pellets was around 92~94% of the theoretical density and did not change significantly as the amount of SiB2 addition increased. However, the density of sintered pellets decreased with the increase in SiB4. The grain growth could be characterized in terms of two stages: Grain growth occurred with the increasing density in the first stage, whereas the second stage was characterized by the grain growth without increasing of density. A liquid phase was observed at grain boundaries and grain edges in the microstructure of sintered UO2 pellets with 5000 ppm and 10,000 ppm SiB4. This liquid, possible formed at about 168$0^{\circ}C$, did not enhance the shrinkage, but appeared to accelarate the grain growth. It seems that the second stage grain growth was due to the presence of pressurized insoluble trapped gas in isolated pores.