• Transactions on Electrical and Electronic Materials
• /
• v.6 no.2
• /
• pp.78-84
• /
• 2005

Standard crystalline solar cells are generally fabricated with the front grid pattern of silver paste contact. We have reported a detailed theoretical analysis of the proposed segmented cross grid line pattern in this paper. This work was carried out for the optimization of spacing and width of grid finger, main busbar and sub-busbar. The overall electrical and optical losses due to front contact were brought down to $10\%$ or even less as compared to the usual loss of $15\%$ or more in the conventional screen printed silver paste technology by choosing proper grid pattern and optimizing the grid parameters. The total normalized power loss for segmented mesh grid with plated metal contact was also observed and the total power loss could be brought down to $10.04\%$ unlike $11.57\%$ in the case of continuous grid and plated contact. This paper is able to outline the limitations of conventional screen printed contact.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.199-201
• /
• 2006

A lot of researches and experiments have been performed to make more efficient dye-sensitized solar cell. Among them, insertion of a grid electrode in DSC is one method to increase overall performance as being shortened distance of electrons' movement by diffusion. In this paper, we measured overall characteristics which is included voltage-current characteristic curve, efficiency, fill factor by comparison between DSC without and with grid electrode. As a result, we got maximum 1.8 times increase of efficiency and approximately 1.7 times rise of fill factor. And we experimented 8, 10, 12, 14mm of grid gap and compared their results to optimize grid gap which is able to incite the most effective movement of electrons. Consequently, we got the result that electrons' movement is the most effect ive when grid gap is approximately 12mm.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.101-105
• /
• 2021

Encouragement of DER from Korean government with several policies boosts DER installation in power system. When the penetration of DER in the grid is getting high, loss of generation with break-away of DER by abnormal grid conditions should be considered, because loss of high generation causes abnormal low frequency and additional operations of protection system. Therefore, KEPCO where is Korean power utility is preparing improvement in regulations for DERs connected to the grid to support abnormal grid conditions such as low and high frequencies or voltages. This is called 'Ride Through' because the requirement is for DER to maintain grid connection during required periods when abnormal grid conditions occur. However, it is not easy to have a test for ride through capability in reality because emulation of abnormal grid conditions is not possible in real power system in operation. Also, it is not easy to have a study on grid effect when ride through capability fails with the same reason. PHILs (Power Hardware In the Loop System) makes it possible to analyze power system and hardware performance at once. Therefore, this paper introduces PHILs test methods and presents verification of ride through capability especially for low voltage grid conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.22-29
• /
• 2023

A grid-connected inverter can be used in grid-connected or stand-alone modes. Generally, a grid-connected inverter operates in a grid-connected mode, but the inverter operates in stand-alone mode if grid faults occur. In the stand-alone mode, the grid-connected inverter must supply electric power to a critical load that needs to receive stable power even though grid faults occur. Generally, three-phase loads are used as critical loads, but a single phase is configured in some cases. In these conditions, the critical load is required to unbalance the load power consumption, which makes the three-phase load voltage unbalancd. This unbalanced voltage problem can cause fatal problems to the three-phase critical loads, and thus must be addressed. Hence, this paper proposes an algorithm to solve this unbalanced voltage problem by the individual phase current control. The proposed method is verified using Psim simulation and experiments.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.25-38
• /
• 2021

Purpose: To reduce the damage caused by continuously occurring typhoons, we proposed a standardized grid so that it could be actively utilized in the prevention and preparation stage of typhoon response. We established grid-based convergence information on the typhoon risk area so that we showed the effectiveness of information used in disaster response. Method: To generate convergent information on typhoon hazard areas that can be useful in responding to typhoon situation, we used various types of data such as vector and raster to establish typhoon hazard area small grid-based information. A standardized grid model was applied for compatibility with already produced information and for compatibility of grid information generated by each local government. Result: By applying the grid system of National branch license plates, a grid of typhoon risk areas in Seoul was constructed that can be usefully used when responding to typhoon situations. The grid system of National branch license plates defines the grid size of a multi-dimensional hierarchical structure. And a grid of typhoon risk areas in Seoul was constructed using grids of 100m and 1,000m. Conclusion: Using real-time 5km resolution grid based weather information provided by Korea Meteorological Administration, in the future, it is possible to derive near-future typhoon hazard areas according to typhoon travel route prediction. In addition, the national branch number grid system can be expanded to global grid systems for global response to various disasters.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.43-55
• /
• 2015

Currently, each organization has developed its gridded data in the form of respective grid system for its own purpose. Interoperability among the organization had been limited and resulted in inconvenient data access and application across domains. In this study, we investigated potential standards for National grid system and their strength and weakness. We also reviewed existing gridding schemes and had a survey of demand about grid system to those who have used or would plan to use gridded data in academic and business sectors. As the result of survey of demand, we suggested national grid system for national grid data integration management system which has the mutual compatibility and also proposed sharing scheme of the grid type for users who need to grid data.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.2
• /
• pp.67-72
• /
• 2015

Power grid techniques are distributed over general power systems ranging from power stations to power transmission, power distribution, and users. To monitor and control the elements and performance of a power system in real time in the extensive area of power generation, power transmission, wide-area monitoring (WAM) and control techniques are required (Sattinger et al. 2007). Also, to efficiently operate a power grid, integrated techniques of information and communication technology are required for the application of communication network and relevant equipment, computing, and system control software. WAM should make a precise power grid measurement of more than once per cycle by time synchronization using GPS. By collecting the measurement values of a power grid from substations located at faraway regions through remote communication, the current status of the entire power grid system can be examined. However, for GPS that is used in general national industries, unexpected dangerous situations have occurred due to its deterioration and jamming. Currently, the power grid is based on a synchronization system using GPS. Thus, interruption of the time synchronization system of the power system due to the failure or abnormal condition of GPS would have enormous effects on each field such as economy, security, and the lives of the public due to the destruction of the synchronization system of the national power grid. Developed countries have an emergency substitute system in preparation for this abnormal situation of GPS. Therefore, in Korea, a system that is used to prepare for the interruption of GPS reception should also be established on a long-term basis; but prior to this, it is required that an evaluation technique for the time synchronization performance of a GPS receiver using an atomic clock within the power grid. In this study, a monitoring system of time synchronization based on GPS at a power grid was implemented, and the results were presented.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.11-19
• /
• 2008

Recently, advances in mobile devices and wireless communication technologies require research on various location-based services. As a result, many studies on processing k-nearest neighbor query, which is most im portant one in location-based services, have been done. Most of existing studies use pre-computation technique to improve retrieval performance by computing network distance between POIs and nodes beforehand in spatial networks. However, they have a drawback that they can not deal with effectively the update of POIs to be searched. In this paper, we propose a distributed grid scheme using S-GRID to overcome the disadvantage of the existing work as well as to manage the location information of a large number of moving objects in efficient way. In addition, we describe a k-nearest neighbor(k-NN) query processing algorithm for the proposed distributed grid scheme. Finally, we show the efficiency of our distributed grid scheme by making a performance comparison between the k-NN query processing algorithm of our scheme and that of S-GRID.

• Journal of radiological science and technology
• /
• v.41 no.5
• /
• pp.463-469
• /
• 2018

Morphological information such as shape and margin of micro lesion is important information for diagnosis of disease in clinical imaging. In this study, we investigated the morphological changes of the micro lesions by comparing the contrast and area in grid suppressed DR images according to grid frequency. In the profile analysis of the image, the mass showed an average intensity variation of 8.6 ~ 72.4 after suppression, The higher the grid frequency, the more the contrast was increased. However, in the images obtained using 103 lp / inch, which is a grid frequency less than the sampling frequency, the contrast of the mass in the vertical direction decreased after suppression. In the binary image, the area change of the mass was also large. As a result, the shape, size, and margin of the mass changed. In the case of very small calcification, the higher the grid frequency is the larger the change in contrast, so that a clear image can be obtained in the post-suppression image. However, we could confirm that the margin of the lesion was blurred and the lesion was lost in some of the images using the 103 lp / inch grid. The higher the frequency of the grid, The change of the contrast of fiber occurred largely and clear boundary was confirmed. The decrease of the number of pixels was small and morphological change was small. In conclusion, when using a grid frequency that is not suitable for the sample frequency, morphological changes or lesion loss of micro lesions in the post- suppression image may give the possibility of misdiagnosis in diagnosis and differentiation of the image.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2007

At present various methods relating resource access control in grid environment are being studied. Most of the access authorization to grid resource is designed fit to the attributes and the role of user. But resource access control is to be made in the respect of business model to activate grid. Therefore this study suggests a model that can operate resource access control driven by grid accounting information. On the base of collection of accounting information about grid job, processing cost is yielded. If the user's available fund is less than processing cost, it gets to control grid job by the resource access control policy. Finally when grid job is completed, user is assigned to pay the charges for using resource of supplier. Then resource provider gets to supply stable resource in grid by participating it voluntarily to use idle resource. This study is esteemed to realize utility computing environment correspondent to economic principle by ensuring resource access policy of organizations which participate in grid.