• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.113-120
• /
• 2006

A lot of small-scale reservoirs that is extravagant in whole country are controlled state or real conditionthat correct data about the practice contents is not equipped all up to now. In this study, YungNam districts that region Gyeong-Ju city reservoir is distributed much of when flow speedily choose 23 peace among 73 small scale reservoir and experimented. Acquired data every 5 seconds, and user E/S and user value TS for orthocenter to 1 second interval and executes present ondition measurement using RTK-GPS. Could was wave and state that reservoir of 15 places (about 65%) gives protective care that do 3D modelling with acquired data, and now correct contents about reservoir state past through comparative analysis with data. Also, area of full water and wave that analyze effective storage and area of full water of 23 places reservoir could know that 20.63%, effective storage decreased as 3.34%. I wish to contribute about analysis about present reservoir state through this and method the adminstration direction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.4 s.22
• /
• pp.69-76
• /
• 2002

Nowadays information is very important for Civil Engineering. This information is acquiredmostly via Surveying & Geo-spatial Information System. Also this information is close to the ITS(Intelligent Transformation System), Navigation, Facility Management, and Digital Mapping, etc and applicable to versatile fields from now on. And in surveying fields, GPS satellites are introduced newly and play a great rules. In this study, RTK(Real-Time Kinematic GPS), one of the positioning technology with GPS satellites, is used for the production of Plane Figure of Campus. The results shows that it is possible to extract the information for some part of a flowerbed and road, but not so for the buildings surrounded. Therefore this give occasion to the a lowering of work effectiveness over the total work-flow. So at such a time, it will be expected that the supplementary systems such TS(Total Station), Plane-table, and theodolite, etc have to be used.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.11-17
• /
• 2005

A lot of small-scale reservoirs that is extravagant in whole country are controlled state or real condition that correct data about the practice contents is not equipped all up to now. In this study, YungNam districts that region Gyeong-Ju city reservoir is distributed much of when flow speedily choose 23 peace among 73 small scale reservoir and experimented. Acquired data every 5 seconds, and user E/S and user value TS for orthocenter to 1 second interval and executes present condition measurement using RTK-GPS. Could was wave and state that reservoir of 15 places (about 65%) gives protective care that do 3D modelling with acquired data, and now correct contents about reservoir state past through comparative analysis with data. Also, area of full water and wave that analyze effective storage and area of full water of 23 places reservoir could know that 20.63%, effective storage decreased as 3.34%. I wish to contribute about analysis about present reservoir state through this and method the adminstration direction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.107-114
• /
• 2002

The cadastral surveying is essential for the effective management of a country, the D/B building of NGIS. Many of GPS applications require a positioning accuracy of several centimeters for rover in real-times. But, to achieve higher positioning accuracies in real-time, the double differencing technique should be implemented using carrier phase data. Corrected observations at the reference station can be transmitted and used to form double difference observations at the rover using a data link. In this study, the area accuracy of cadastral survey using the RTK GPS will be assessed, and will produce area of parcel of land. As the result of comparison among area by TS, planer surveying and RTK GPS. parcels-register for site is analyzed by this data. The results show that mean error of area calculated min. $2.42m^{2}{\sim}\;max.\;13.69m^{2}$ and RMSE calculated min. $0.00329\;{\sim}\;max.\;0.01846$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.235-240
• /
• 2006

The paper will give an overview of the mission of GalTeC and then concentrate on two main aspects. The first more detailed aspect, is the analysis of the key performance parameters for the Galileo system services and presenting a technical overview of methods and algorithms used. The second more detailed aspect, is the service volume prediction including service dimensioning using the Prediction tool. In order to monitor and validate the Galileo SIS performance for Open Service (OS) and Safety Of Life services (SOL) regarding the key performance parameters, different analyses in the SIS domain and User domain are considered. In the SIS domain, the validation of Signal-in-Space Accuracy SISA and Signal-in-Space Monitoring Accuracy SISMA is performed. For this purpose first of all an independent OD&TS and Integrity determination and processing software is developed to generate the key reference performance parameters named as SISRE (Signal In Space Reference Errors) and related over-bounding statistical information SISRA (Signal In Space Reference Accuracy) based on raw measurements from independent sites (e.g. IGS), Galileo Ground Sensor Stations (GSS) or an own regional monitoring network. Secondly, the differences of orbits and satellite clock corrections between Galileo broadcast ephemeris and the precise reference ephemeris generated by GalTeC will also be compared to check the SIS accuracy. Thirdly, in the user domain, SIS based navigation solution PVT on reference sites using Galileo broadcast ephemeris and the precise ephemeris generated by GalTeC are also used to check key performance parameters. In order to demonstrate the GalTeC performance and the methods mentioned above, the paper presents an initial test result using GPS raw data and GPS broadcast ephemeris. In the tests, some Galileo typical performance parameters are used for GPS system. For example, the maximum URA for one day for one GPS satellite from GPS broadcast ephemeris is used as substitution of SISA to check GPS ephemeris accuracy. Using GalTeC OD&TS and GPS raw data from IGS reference sites, a 10 cm-level of precise orbit determination can be reached. Based on these precise GPS orbits from GalTeC, monitoring and validation of GPS performance can be achieved with a high confidence level. It can be concluded that one of the GalTeC missions is to provide the capability to assess Galileo and general GNSS performance and prediction methods based on a regional and global monitoring networks. Some capability, of which first results are shown in the paper, will be demonstrated further during the planned Galileo IOV phase, the Full Galileo constellation phase and for the different services particularly the Open Services and the Safety Of Life services based on the Galileo Integrity concept.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.9-15
• /
• 2011

Nowadays, the Surveying field is growing rapidly in terms of technology such as TS(Total Station) surveying, photographic surveying, digital aerial photogrammetry, utilization of GIS(Geographic Information System) using high-resolution satellite imagery, obtaining 3D Coordinate using GPS. But control point surveying, benchmark measuring, and field Surveying are still performed by the engineers in the field. So, 3D yerrestrial laser scanner comes to the fore recently. 3D terrestrial laser scanner can get 3D coordinate about a number of sites of the subject in a short period with high accuracy. This paper compared the accuracy of data from the performance using 3D terrestrial laser scanner with that of TS. It also obtained the geopositioning accuracy result equivalent to the surveying result of TS. With further researches in the future, it is expected to be used not only in LiDAR itself but also in various areas like reconnaissance Surveying and construction by combining with TS or other Surveying equipments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.55-64
• /
• 2021

In this study, the operation method and accuracy of Terrestrial Laser Scanner(TLS) are reviewed and discussed by experimental measurements, and guidelines of TLS surveying operation are proposed. Ground control points and TLS station points were measured by TS and/or GPS, in TLS observation experiments, and wood targets were used which designed by this study team. RMSE accuracy of TLS scan shows that TLS surveying operation can be used in the topographic mapping of 1/250 scale and level of 1/100 BIM, the drone data also used in TLS data completeness. Additionally, as the results of the field experiment, the guidelines for TLS surveying operartions were proposed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.129-132
• /
• 2009

Automatic target recognition surveying method is very important technology one-man surveying system. But in the case of loss of prism's position, it have to be re-tracking for searching it, consuming the searching time and complicated in processing. In this study, it is proposed new GPS receiver combination technology for orientation of both. In conclusion, the robotic TS(totalstation) is well assisted by absolute coordinates from single GPS receiver and multi-functional surveying instrument.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.105-108
• /
• 2011

본 연구에서는 기준국을 달리함으로써 관측 횟수를 달리하여 RTK-GPS 측량을 시행하여 보고 이에대한 정확도 분석을 토대로 지적측량에 효율적인 적용 방안을 제시하여 보고자 하였다. 실험지역을 선정하고 기준국을 달리하여 관측 후 기존 TS 성과와 비교한 결과, 제1기준국은 X좌표의 RMSE가 ${\pm}0.024m$, Y좌표의 RMSE가 ${\pm}0.016m$로 산출되었고, 제2기준국은 X좌표의 RMSE가 ${\pm}0.040m$, Y좌표의 RMSE가 ${\pm}0.029m$로 산출되었다. 이는 모두 현행 지적법령에서 규정하고 있는 성과인정 범위 이내의 오차이고, 더불어 두 성과의 차이는 크지 않았다. 따라서 GPS 위성자료 수신에 장애가 없다면 1회 관측으로도 충분히 안정적인 성과의 취득이 가능한 것으로 나타났다. 다만, 측량 환경에 따라 주변에 수신에 제약을 받는 요소가 있다면 이러한 지역에 대해서는 성과의 안정적인 취득을 위해 2회 이상의 관측이 필요할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.59-65
• /
• 2012

The study conducted the measurement of RTK-GPS with changing the number of observation as the method to differ reference stations of RTK-GPS. Also it aimed to suggest an effective application plan for cadastral surveying based on the accuracy analysis accordingly. According to the result of selecting the study region, observing with different reference stations, and comparing with previous TS performance, the 1st reference station was calculated as ${\pm}0.024m$ for x-coordinate's RMSE and ${\pm}0.029m$ for y-coordinate's RMSE, and the 2nd reference station was calculated as ${\pm}0.040m$ for x-coordinate's RMSE and ${\pm}0.029m$ for y-coordinate's RMSE. All these results (the 1st and the 2nd reference stations) are allowed as acceptable performance within the margin of error according to the existing cadastral regulations, and there was no significant difference between two performances. Therefore, unless there was no problem in receiving GPS satellite data, it would be possible to secure stable performance enough with 1 observation. Depending on surveying environment that has possible problems in receiving data, however, 2 or more observations would be necessary to secure stable performance.