• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.13-26
• /
• 2007

A VDS data in the domestic has been used within limits to real time information such as congestion management, incident management, and route guidance service. On the other hand, a VDS data in the foreign countries had been used to various objectives such as transportation policy assessment, transportation construction evaluation, franc safety improvement, and etc. The scope and method of the study is the VDS data which was installed in the uninterrupted flow such as the freeway and the interrupted flow in a diversion route of the leeway. It has investigated and analyzed the VDS as our subject to study, study objective and study methodology for each study generally classified as 1) data collection 2) data processing 3) data store and 4) data quality section. This study has investigated and analyzed the various literatures in domestic and foreign countries regarding the VDS data. And It drew the development direction of the study which is about VDS data in domestic from now.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.155-160
• /
• 2018

The unmanned aerial vehicle (UAV) is used in various fields, such as land surveying, facility management, and disaster monitoring and restoration because it has low operational costs, fast data acquisition, and can generate a digital surface model (DSM). Recently, the UAV has been applied to process management in construction projects. Construction projects are widely distributed not only in urban areas but also in mountainous areas and rural areas where people are rarely in traffic or in vehicles. Projects range from a few hundred meters to several kilometers long. In order to perform a reconnaissance survey, a surveying method using a global positioning system (GPS) or a total station has mainly been used. However, these methods have a disadvantage in that a lot of time is required for data acquisition. This study's purpose is to evaluate the usability of a UAV DSM for surveying a construction area. Data was acquired using the UAV and a three-dimensional (3D) laser scanner, and the DSM of the construction site was created through data processing. The UAV DSM showed accuracy to within 30 cm based on the 3D laser scanner data, and a process comparison between the two work methods was able to present the usability of the UAV DSM in the field of construction surveying. Future utilization of the UAV DSM is expected to greatly improve the efficiency of work in construction projects.

• Journal of KIISE:Databases
• /
• v.33 no.7
• /
• pp.655-667
• /
• 2006

Due to the rapid development in mobile communication technologies, the usage of mobile devices such as cellular phones and PDAs becomes increasingly popular. One of the best ways to maximize the usability of mobile devices is to make them aware of their current locations and the locations of other fixed and mobile objects. In this paper, we propose a cost-effective Bus Information System, ACE-BIS, which utilizes a mobile device to retrieve the bus routes to reach a destination from the current location. To accomplish this task, ACE-BIS maintains a small amount of information on bus stops and bus routes in a mobile device and runs a heuristic routing algorithm based on such information. When a user asks more accurate route information or calls for a 'leave later query', ACE-BIS entrusts the task to a server into which real-time traffic and bus location information is being collected. By separating the roles into a mobile device and a server, ACE-BIS is able to provide bus routes at the lowest cost for wireless communications, without imposing much burden to a server. The results of extensive experiments revealed that ACE-BIS is effective and scalable in most experimental settings.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.48-57
• /
• 2013

Smartphones provide users with environment for communication and sharing information and at the same time play an important role of mobile technology and mobile art development. Smartphone technology-related researches are being accelerated especially with the advent of mobile Augmented Reality(AR) age, but the studies on user participation that is essential for AR content industry were insufficient. In that regard, the assistance from mobile art area that has already developed these characteristics is essential. Thus, this article is to classify mobile art that has not been studied a lot domestically into feature phone usage and smartphone usage and to analyze each example case with the three most used methods. The usage of feature phones which use the sound and images of mobile devices can be divided into three: installation and performing methods, single channel video art method and five senses communication method. On the other hand, the usage of smartphones that use sensors, cameras, GPS and AR can be divided into location-based AR, marker-based AR and markerless AR. Also, as a result of examining mobile AR content utilization technology by industries, combined methods are utilized; tourism and game-related industries use location-based AR, education and medicine-related industries use marker-based AR, and shopping-related industries use markerless AR. The development of AR content industry is expected to be accelerated with mobile art that makes use of combined technology method and constant communication method through active participation of users. The future development direction of mobile AR industry is predicted to have minimized HMD, integration of hologram technology and artificial intelligence and make the most of big data and social network so that we could overcome the technological limitation of AR.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.439-452
• /
• 2014

This paper suggests the method to extend service area by using the transmit offset delay in T-DMB single frequency network (SFN). In general, synchronization of the transmit time of all site can be done by using the reference clock of GPS, which dose not reflect the details geographical characteristics and transmit specifications of each site. Applying the site-specific transmit offset delay, we could extend the service area of SFN T-DMB. Applying the transmit offset delay, it is found that the signal quality in the region of weak receive field strength was improved and upto 4~8 km service area expansion was achieved by satisfying the minimum field strength ($45dB{\mu}V/m$) recommended by the Korea Communications Commission (KCC). Site-specific offset delay was calculated considering the geographic service area characteristics, distribution of electric field strength between neighboring sites and site-specific service target area. Experiments were carried out in order to analyze impact of calculated offset delay on the T-DMB SFN and also to confirm that the offset delay extends T-DMB service coverage. The experiment was done in metropolitan T-DMB service areas.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.1-9
• /
• 2007

Cellular operators develop high speed mobile internet and multi-function cellular phones to activate new business model based on mobile internet services. Domestic cellular operators evolve their mobile networks from cdma2000-1x and EvDo to HSDPA to activate high speed mobile internet services. They also develop mobile internet platforms such as WIPI, BREW, and J2ME on multi-function cellular phones having multimedia solutions such as camera, MP3, MPEG, 3D game engine, DMB, PAN such as bluetooth, IrDA, W-LAN, and location information using GPS. But, content providers have problems of redevelopment of the same mobile internet application on different mobile internet platforms provided by cellular operators. In this paper, we develop conversion solutions for interoperability of mobile internet applications on WIPI and BREW using an one-pass compiler. We confirm the performance the proposed conversion solutions for the API conversion rate, the converted file size, and the full conversion time using the popular mobile games which are the killer applications on WiPI and BREW.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1373-1380
• /
• 2010

The plate loading test(PLT) and the field density test are mainly used on the construction of embankments to control the compaction of a limited layer thickness. These two test methods are very time consuming and inefficient, but they are still commonly used as the methods of quality control for soil compaction. In the last 3 decades, many devices such as geogauge, light falling weight deflectometer(LFWD) and dynamic cone penetrometer(DCP) etc., have been introduced into the engineering market with the objective of acquiring in situ stiffness properties of the compacted soil layers. Recently, a new type of sensor, called compactometer, which in mounted on the drum of a roller and measures impact forces continuously with GPS, called as Continuous Compaction Control(CCC), has come into use in many countries such as America, Germany, Japan and so on. The main objective of this paper is to assess the potential use of these new devices as quality control and assurance devices for compacted soil layers. Based on this study, compactometer and the LFWD results werestrongly correlated with the result obtained from the PLT and the field density test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1294-1300
• /
• 2010

In an environment where all nodes move, the sensor node receives anchor node's position information within communication radius and modifies the received anchor node's position information by one's traveled distance and direction in saving in one's memory, where if there at least 3, one's position is determined by performing localization through trilateration. The proposed localization mechanisms have been simulated in the Matlab. In an environment where certain distance is maintained and nodes move towards the same direction, the probability for the sensor node to meet at least 3 anchor nodes with absolute coordinates within 1 hub range is remote. Even if the sensor node has estimated its position with at least 3 beacon information, the angle ${\theta}$ error of accelerator and digital compass will continuously apply by the passage of time in enlarging the error tolerance and its estimated position not being relied. Dead reckoning technology is used as a supplementary position tracking navigation technology in places where GPS doesn't operate, where one's position can be estimated by knowing the distance and direction the node has traveled with acceleration sensor and digital compass. The localization algorithm to be explained is a localization technique that uses Dead reckoning where all nodes are loaded with omnidirectional antenna, and assumes that one's traveling distance and direction can be known with accelerator and digital compass. The simulation results show that our scheme performed better than other mechanisms (e.g. MCL, DV-distance).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.427-436
• /
• 2016

Due to disasters such as earthquakes and landslides in urban areas, persons have been buried inside collapsed buildings and structures. Rescuers have mainly utilized detection equipment by applying sound, video and electric waves, but these are expensive and due to the directional approaches onto the collapsed site, secondary collapse risk can arise. In addition, due to poor utilization of such equipment, new human detection technology with quick and high reliability has not been utilized. To address these issues, this study develops a wireless signal-based human detection module that can be loaded into an Unmanned Aerial Vehicle (UAV). The human detection module searches for the 3D location for buried persons by collecting Wi-Fi signal and barometer sensors data transmitted from the mobile phones. This module can gain diverse information from mobile phones for buried persons in real time. We present a development framework of the module that provides 3D location data with more reliable information by delivering the collected data into a local computer in the ground. This study verified the application feasibility of the developed module in a real collapsed area. Therefore, it is expected that these results can be used as a core technology for the quick detection of buried persons' location and for relieving them after disasters that induce building collapses.