• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.59-65
• /
• 2004

The paper presents a small unmanned probing ship that can be used for acquiring information on marine and coastal environments. For communication system, we adopt direct and indirect methods based on the wireless modem of a commercial cellular telephone. The former is a direct communication between the modems of the ship and the server, and the latter is an indirect communication via internet between the ship and the server. The system is equipped with a digital compass and a GPS for position estimation, and extended Kalman filter is used for Navigation. The performance of the ship is demonstrated with the results produced by sets of experiments.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.15-19
• /
• 2004

현재 국내에서는 NMEA 프로토콜 멀티플렉서를 개발한 사례 및 제품이 없어, 외국의 고비용 장비를 수입하여 사용하거나, 멀티 포트를 이용하여 NMEA 프로토콜을 전송하는 프로그램을 소프트웨어 적으로 구현하여 사용하고 있다. 이러한 방법은 고비용이 지출되거나, 각 응용프로그램마다 별도의 처리 부분을 작성해야하는 문제점이 있다. 또한, NMEA 프로토콜을 출력하는 각각의 장비들은 제조 회사 및 플랫폼이 다르므로 이중의 자원낭비 및 손실 등을 초래할 수 있다. 본 논문에서는 이를 보완하기 위하여 신뢰성 있는 처리방법과 고성능의 단일 하드웨어 모듈로서 독립적으로 동작할 수 있고 최적화된 큐의 설계를 이용하여 모듈의 메모리 효율을 높이며, 주요 입력 센서 장비인 자이로콤 파스, 에코 사운드, GPS 등의 장비들과 실시간 통신의 높은 신뢰성을 유지할 수 있는 NMEA 프로토콜 멀티플렉서를 구현에 대하여 제안하였다.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1294-1300
• /
• 2010

노드들 모두가 움직이는 환경에서 센서 노드는 통신반경 안의 앵커 노드 위치정보를 수신 받아 자신이 이동한 거리와 방향만큼 수신한 앵커 노드 위치정보를 수정하여 자신의 메모리에 저장하고, 3개 이상이 되면 삼변 측량에 의해 localization을 수행하여 자신의 위치를 결정한다. 일정한 거리를 유지하고 노드들이 같은 방향으로 움직이는 환경에서는 센서 노드가 1홉 범위에서 절대좌표를 가진 앵커 노드를 3개 이상 만날 확률이 적다. 만약 센서 노드가 3개 이상의 비콘 정보로 자신의 위치를 추정하였다고 하여도 시간이 경과하면서 가속도기와 디지털 나침반의 각 ${\theta}$ 오차가 지속적으로 적용되어 오차범위는 커지고 추정된 위치도 신뢰받지 못한다. Dead reckoning 기술은 GPS가 동작하지 않는 곳에서 보조적인 위치 추적 항법 기술로 사용되고 있는데 가속도 센서와 디지털 나침반으로 노드가 움직인 거리와 방향을 알면 자신의 위치를 추정할 수 있다. 위치 인식 알고리즘은 Dead reckoning 을 이용한 위치인식 기법으로 모든 노드가 전방향성 안테나를 장착하고, 가속도기와 디지털 나침반으로 자신이 이동한 거리와 이동 방향을 알 수 있다고 가정한다. Matlab을 이용하여 시뮬레이션한 결과 다른 기법(MCL,DV-distance)들 보다 우수함을 증명하였다.

• 수산해양기술연구
• /
• 제31권1호
• /
• pp.84-92
• /
• 1995

군산대학교 실습선 해림 3호의 조종성능을 파악하기 n이하여 GPS 보다 그 측립정도가 더 높은 DGPS를 이용하여 종회권 측정을 행하고, 이를 재래식 측정방법인 부표방입반법과 비교 검토하였으며, 그 결과를 요약하면 다음과 같다. 1. DGPS에 의한 선회권측정의 정도를 파악하기 위하여 육상에서 50m의 선회시험을 행한 결과 측위오차는 1.5m 이내 였다. 2. DGPS에 의한 선회권측정은 속력별, 타각별, 좌우선회별로 각각 그 특성이 잘 나타낼 수 있도록 정확하게 측정 할 수 있었다. 3. 부표방위반법에 의한 선회권측정은 타각을 크게 하여 그 선회권이 작을 때는 DGPS의 것과 같이 비교적 정확하게 측정할 수 있으나, 타각을 작게하여 선회권이 클 때는 방위오차가 크기 때문에 정확하게 측정할 수 없었다. 4. DGPS에 의한 해림 3호의 선회경(DT)은 타각 35。~5。일 때, 미속에서는 선박의 수선간장 (Lpp)상의 2.6~15.0배, 반속에서는 2.8~16.6배, 전속에서는 3.1~17.4배로 나타났었고, 부표방위반법에 의한 선회경은 각각 2.4~9.5배, 2.6~9.6배, 3.2~12.2배로 나타났었다

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• 농업과학연구
• /
• 제42권1호
• /
• pp.63-71
• /
• 2015

Path planning is an essential part for traveling and mowing of autonomous lawn mower tractors. Objectives of the paper were to analyze operation patterns by a skilled farmer, to extract and optimize waypoints, and to demonstrate generation of formatted planned path for autonomous lawn mower tractors. A 27-HP mower tractor was operated by a skilled farmer on grass fields. To measure tractor travel and operation characteristics, an RTK-GPS antenna with a 6-cm RMS error, an inertia motion sensing unit, a gyro compass, a wheel angle sensor, and a mower on/off sensor were mounted on the mower tractor, and all the data were collected at a 10-Hz rate. All the sensor data were transferred through a software program to show the status immediately on the notebook. Planned path was generated using the program parameter settings, mileage and time calculations, and the travel path was plotted using developed software. Based on the human operation patterns, path planning algorithm was suggested for autonomous mower tractor. Finally path generation was demonstrated in a formatted file and graphic display. After optimizing the path planning, a decrease in distance about 13% and saving of the working time about 30% was achieved. Field test data showed some overlap, especially in the turning areas. Results of the study would be useful to implement an autonomous mower tractor, but further research needs to improve the performance.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5564-5569
• /
• 2011

본 연구는 U-Learning을 위한 안드로이드 플랫폼에서의 증강 현실 도입에 대한 것이다. 안드로이드는 모바일 컴퓨팅 및 개방형 기술의 새로운 기반이며, 안드로이드는 모바일 전화에만 국한되지 않고 다양한 장치에 적용이 가능하다. 또한 개발자의 기술을 활용할 수 있는 기회를 제공하며, 활동적이고 흥미로운 커뮤니티를 구축할 기회를 제공한다. 증강현실은 카메라, GPS 등 대부분 애플리케이션에 적용될 수 있으며, 점차 스마트 폰에서 일반화되고 있다. 증강현실은 웹 접속이 가능한 유비쿼터스 장비를 통해 개인들이 유연하게 정보들을 수신, 발신, 검토할 수 있는 교육도구가 될 수 있다. 본 논문에서는 형식 정의에 증강 현실을 이용한 안드로이드 스마트 폰을 사용하여 형식 식별을 위한 증강 현실을 제안한다. 본 연구는 학생들의 외부 공간 실습 활동, 즉 동물원, 식물원 등이 방문 시에 유용할 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.251-256
• /
• 2006

In the work package 'Integrated Positioning' of the research project NAVIO (Pedestrian Navigation Systems in Combined Indoor/Outdoor Environements) we are dealing with the navigation and guidance of visitors of our University. Thereby start points are public transport stops in the surroundings of the Vienna University of Technology and the user of the system should be guided to certain office rooms or persons. For the position determination of the user different location sensors are employed, i.e., for outdoor positioning GPS and dead reckoning sensors such as a digital compass and gyro for heading determination and accelerometers for the determination of the travelled distance as well as a barometric pressure sensor for altitude determination and for indoor areas location determination using WiFi fingerprinting. All sensors and positioning methods are combined and integrated using a Kalman filter approach. Then an optimal estimate of the current location of the user is obtained using the filter. To perform an adequate weighting of the sensors in the stochastic filter model, the sensor characteristics and their performance was investigated in several tests. The tests were performed in different environments either with free satellite visibility or in urban canyons as well as inside of buildings. The tests have shown that it is possible to determine the user's location continuously with the required precision and that the selected sensors provide a good performance and high reliability. Selected tests results and our approach will be presented in the paper.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.165-176
• /
• 2009

The process of berthing/deberthing operations for entering/leaving vessels in Busan northern harbor was analyzed and evaluated by using an integrated VTS(vessel traffic service) system installed in the ship training center of Pukyong National University, Busan, Korea. The integrated VTS system used in this study was consisted of ARPA radar, ECDIS(electronic chart display and information system), backup(recording) system, CCTV(closed-circuit television) camera system, gyro-compass, differential GPS receiver, anemometer, AIS(automatic identification system), VHF(very high frequency) communication system, etc. The network of these systems was designed to communicate with each other automatically and to exchange the critical information about the course, speed, position and intended routes of other traffic vessels in the navigational channel and Busan northern harbor. To evaluate quantitatively the overall dynamic situation such as maneuvering motions for target vessel and its tugboats while in transit to and from the berth structure inside a harbor, all traffic information in Busan northern harbor was automatically acquired, displayed, evaluated and recorded. The results obtained in this study suggest that the real-time tracking information of traffic vessels acquired by using an integrated VTS system can be used as a useful reference data in evaluating and analyzing exactly the dynamic situation such as the collision between ship and berth structure, in the process of berthing/deberthing operations for entering/leaving vessels in the confined waters and harbor.