• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.77-84
• /
• 2010

In this study, we tried to predict tractor power output, fuel consumption rate and work performance indirectly in order to develop an eco driving system. Firstly, we developed equations which could predict tractor power output and fuel consumption rate using characteristic curves of tractor power output. Secondly, with actual engine rpm determined by initial engine rpm and work load, tractor power output and fuel consumption rate were forecasted. Thirdly, with speed signals of GPS sensor system, it was possible to foresee tractor work performance and fuel consumption rate. Lastly, precision of the eco driving system was evaluated through tractor PTO test, and effects of the eco driving system were investigated in the plowing and rotary tilling operations. Engine rpm, power output, fuel consumption rate, work performance and fuel consumption rate per plot area were displayed in the eco driving system. Predicted tractor power outputs in the full load curve were well coincided with the actual power output of prototype, but small differences, 1 to 6 ㎾, were found in the part load curve. Error of the fuel consumption rate was 0.5 L/h, 4.5%, the greatest, and 1 to 3 L/h at the part load curve. It was shown that 69% and 53% of fuel consumption rates could be reduced in plowing and rotary tilling operations, respectively, when the eco driving system was installed in tractor.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.287-298
• /
• 2000

The charge of distance and the change of tack between paired boats were measured by ship's distance measuring system fixed MCS in the main boat and MS in the following boat. The operating depth of the anchovy boat seine was recorded and analysed by self memory temperature/depth sensor in order to compare the relationship between the distance between towing boats and geometry of the anchovy boat seine net. The results are as follow, (1) When distance between paired boat was 5m, the fishing net was spreaded down deeply and unstably in accordance with bag net and flapper may be help to pass out anchovy school. (2) When distance between paired boat was 100m, vertical opening of the net was gradually increased with higher slope of towing depth in the square, bosom and flapper. Therefore, fishing efficiency could be decreased by preventing the entering of anchovy due to unstable shape of the bag net. (3) When distance between paired boat was 200m, the geometry of the anchovy seine was stable condition with the end of bag net was up while flapper was down and it may cause bad effect in fishing efficiency. (4) When distance between paired boat was 300m, the shape from wing net to bag net was gradually slow down and stable enough as well as good shape in bag net and flapper. (5) The ship's distance measuring system could be used for measurement and accurate control of distance between paired boat in accordance of anchovy recordings by fish finder in order to get higher fishing efficiency in anchory boat seine operation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.427-431
• /
• 2007

Applications in present-day mobile communication systems particularly require miniaturized dimensions and low-profiles of antenna in order to meet the mobile units. Thus, size reductions and bandwidth enhancements are becoming crucial design considerations for practical applications of microstrip antennas. The motivation of further experiments have been stepped to follow those studies for achieving compact and broadband, even multiplied operation modes, which are greatly increased with much attentions recently. To obtain broadband, single-feed, circularly polarized characteristics of microstrip antennas, a design with feed-line ought to be a factor of two. Usually, diagonally balanced-line feeds with hybrid coupler are employed to attain circular polarizations. We firstly formulated DGS (Defected Ground Structures) based operation principles of the entire microstrip components and therefore were able to derive impedance variance of feed-lines. After verifying corresponding experimental results, we targeted the frequency bands of UHF RFID (Ultra High Frequency Radio Frequency IDentification) and approximately of 0.4-2.4GHz have exhibited remarkable two resonance amplitudes as a dual band antenna. Our secondary researches were aimed to design quad band microstrip antenna which represents four resonance characteristics within the identical frequency bands as well. Microstrip patch has been meandered to lengthen the electrical paths, and the other design criteria with respecting physical parameters including radiation patterns and impedance bandwidths measurements will be described for verification. Advisable applications of these antennas can be GSM850, GSM900, GPS (L1-1575 and L2-1227) and UMTS-2110 of cellular systems, which extremely desire multiband and minimum size.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.695-701
• /
• 2008

In this paper, we propose the efficient Doppler removal method using map-based partial-time common intermediate frequency removal technique. In the proposed algorithm, the 2-stage carrier removal process was used. First, the component of common intermediate frequency is removed. Next the component of Doppler was removed with averaging and approximation. For the evaluation of the proposed algorithm, The real-time software GPS L1 C/A-code receiver was implemented. When the proposed algorithms are used, 12 tracking channels with 3 track arm(early, prompt, late) is operated real-time on PC using a Intel Pentium-III 1.0GHz CPU. Also, the requirement of memory was less than 2Mbytes. The real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error. Especially, in spited of using the various approximations for implementing the algorithms, the high sensitivity capability (able to track the weak signal with -159dBm) was achieved.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.115.2-115.2
• /
• 2011

UWISH2 (UKIRT Widefield Infrared Survey for $H_2$) is an unbiased, narrow-band imaging survey of the Galactic plane in the $H_2$ 1-0 S(1) emission line at $2.122{\mu}m$ using the Wide-Field Camera (WFCAM) at the United Kingdom Infrared Telescope (UKIRT). The survey covers about 150 square degrees of the first Galactic quadrant ($10^{\circ}$ < l < $65^{\circ}$; $-1.3^{\circ}$ < b < $+1.3^{\circ}$). The images have a $5{\sigma}$ detection limit of point sources of K~18 mag and the surface brightness limit is $10^{-19}\;W\;m^{-2}$ $arcsec^{-2}$. The survey operation began on 28 July 2009 and has completed on 17 August 2011. We have been studying the supernova remnants (SNRs) in the UWISH2 survey area. Among the known 274 Galactic SNRs, the survey area includes 65 SNRs or 24 percent of the known SNRs. The wide-field and high-quality UWISH2 images allow us to identify both the diffuse extended and compact $H_2$ emission associated with SNRs, which is useful for understanding their physical environment and evolution. The continuum is subtracted from the narrow-band $H_2$ images using the K-band continuum images obtained as part of the UKIDSS GPS (UKIRT Infrared Deep Sky Survey of the Galactic Plane). So far, we have inspected 42 SNRs, and found distinct H2 emission in 14 SNRs. The detection rate is 33%. Some of the SNRs show bright, complex, and interesting structures that have never been reported in previous studies. In this report, we present our identification scheme and preliminary results.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.121-132
• /
• 2000

This study is to investigate the performance of a new BNR process using predenitrification scheme focusing on nitrogen removal and the possibility of adapting a computer simulation scheme in BNR process development. By using a pre-denitrification basin, higher $COD/NO_3-N$ ratio could be sustained in this BNR process. The results of the investigation showed a SDNR value of 9.04mg/gMv/hr. In the anoxic tank, the average value of SPRR of 6.25mgP/gMv/hr was observed to be very sensitive to SCOD load of influents. By calibrating internal parameters (stoichiometric and kinetic parameters) of the simulation model, the results of simulation for various BNR processes gave good agreement with observed data. The major adjustment was given with three parameters, maximum specific growth rate of heterotrophic biomass, short chain fatty acid (SCFA) limit, and phosphorous release rate. With the series of simulations on varying operational conditions, the simulation by computer program can be a useful tool for process selection, and design and operation of municipal wastewater treatment plant.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.388-388
• /
• 2023

영산강은 황룡강과 지석천이 합류하는 지점이기 때문에 많은 비가 내리면 홍수에 취약한 반면, 인근 지역인 나주시 노안면과 광주광역시 승촌동 지역의 지하수를 풍부하게 해주는 역할을 하고 있다. 특히, 승촌보 인근 지역은 겨울철 수온이 따뜻한 지하수를 활용하여 겨울철 미나리를 대규모로 재배하고 있다. 현재 승촌보 운영 수위를 관리 수위인 E.L.7.5m보다 1.5~2m 낮은 E.L.5.5~6.0m로 운영함에 따라 지하수 수위가 보 관리 수위보다 낮게 형성되고 있다. 이에 K-water 영산강보관리단은 여름철 홍수방어를 위해 설치된 배수문을 겨울철에 닫아 인공소류지를 형성함으로써 겨울철 미나리 재배지역에 지하수가 함양되는지 시험운영을 계획하였다. 배수문 시설을 관리하는 한국농어촌공사 광주지사와 광주광역시 남구청과 협의하였다. 이후 영산강유역환경청 민관협의체 위원장과 주민대표 통장님들께 방문 설명 등 지역주민들의 공감대 형성을 거쳐, '22년 9월 30일 승촌보 인근 승촌배수문 등 5개 배수문을 폐쇄하여 11월 30일까지 소류지에 물을 담수하였다. 또한, 소류지의 수위를 파악하기 위해 GPS 측량으로 해발 표고 산정한 간이 목자판 수위계를 설치하여 소류지내 수위를 모니터링하였다. 승촌배수문(#1)에서 발생한 누수는 스펀지를 바닥에 깔아 보강함으로써 누수를 줄여 소류지 수위를 E.L.6.7m 이상을 유지하였다. 그 결과 영산강에 인접한 SCM-008 지하수 관측소 데이터는 승촌보 운영 수위에 영향을 받고 있음을 확인할 수 있었다. 미나리 재배 기간인 3월에는 수막 재배로 인한 지하수 사용으로 수위가 가장 낮았으며, 여름철에 지하수 수위가 회복되는 패턴을 반복하였다. 10월~11월 시험운영기간 동안 SCM-005, -008, -101 지하수 관측정은 소류지와 중앙배수로에 가까울수록 인공 함양시 수위 상승효과가 크게 나타났으며, 평년(2020년~2021년) 대비 지하수위 상승을 확인하였다. SC-0 지역은 2022년 가뭄으로 다우년 대비 지하수 수위가 낮았으나, 시험운영 기간 중 지하수 수위 하강 속도가 늦춰지거나, 수위가 상승하는 것을 확인하였다. 또한, 인근 마을주민들에게 시험 운영 결과를 공유하였고, 소류지가 예년처럼 건천화되었을 때보다 지하수 수위상승과 중앙배수로나 소류지에서 양수하는 등 용수 이용에 도움이 되었다는 긍정적인 답변을 받았다. 따라서 2023년도에도 겨울철 미나리 재배 시기 동안 배수문을 닫아 소류지를 형성하여 지하수 함양에 도움이 되록하여, 미나리 지역의 농가 수익 증대에 보탬이 되도록 할 예정이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.526-533
• /
• 2005

In this paper, the miniaturized the linear polarization and the circular polarization microstrip antennas, which are the two ends in the resonance length direction or all the four-ends were folded are designed and fabricated at the resonant frequency of 1.575 GHz(fur GPS system). For the linear polarization microstrip antenna, the antenna was bent. downward so that the visible length(=L) was reduced by $31.7\%(\varepsilon_r=1.06)$. The folded antenna was folded toward the center of the antenna once again. In this case, the visible length reduction rate, gain, -10 dB bandwidth, E-plane and H-plane HPBW were $73.9\%$, 5.12 dBd, $64MHz(4\%),\;151^{\circ}\;and\;79.2^{\circ}$, respectively. For the circular polarization microstrip antenna, the folded structure of the linear polarization antenna was applied to all the few directions. For the most efficiency the folded bottom surfaces were designed in a triangular shape. In this case, the visible area reduction rate, gain, -10 dB bandwidth, and HPBW in horizontal polarization of the z-x plane and the z-y plane were $71.5\%,\;3.96dBd,\;84MHz(5.3\%),\;80.6^{\circ}\;and\;82.1^{\circ}$, respectively. Therefore, we have confirmed that the folded structure is suitable fer the miniaturization of the microstrip antenna.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.287-302
• /
• 2005

Digital Elevation Models (DEMs) were generated by ERS-l/2 and JERS-1 SAR interferometry in Daejon area, Korea. The quality of the DEM's was evaluated by the Ground Control Points (GCPs) in city area where GCPs were determined by GPS surveys, while in the mountain area with no GCPs, a 1:25,000 digital map was used. In order to minimize errors due to the inaccurate satellite orbit information and the phase unwrapping procedure, a Differential InSAR (DInSAR) was implemented in addition to the traditional InSAR analysis for DEM generation. In addition, DEMs from GTOPO30, SRTM-3, and 1:25,000 digital map were used for assessment the resolution of the DEM generated from DInSAR. 5-6 meters of elevation errors were found in the flat area regardless of the usage and the resolution of DEM, as a result of InSAR analyzing with a pair of ERS tandem and 6 pairs of JERS-1 interferograms. In the mountain area, however, DInSAR with DEMs from SRTM-3 and the digital map was found to be very effective to reduce errors due to phase unwrapping procedure. Also errors due to low signal-to-noise ratio of radar images and atmospheric effect were attenuated in the DEMs generated from the stacking of 6 pairs of JERS-1. SAR interferometry with multiple pairs of SAR interferogram with low resolution DEM can be effectively used to enhance the resolution of DEM in terms of data processing time and cost.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.169-175
• /
• 2016

Geofence is a virtual perimeter for a real-world geographical area, which could be statically or dynamically established the specified area if necessary. Many geofencing applications incorporate 2D(two-dimensional) map such as the Google map, allowing administrators to define boundaries on top of a satellite view of a specific geographical area. But these applications do not provide 3D(three-dimensional) spatial information as well as 2D location information no matter where indoor or outdoor. Therefore we propose a mechanism to identify indoor or outdoor location for 3D geofence, and implement 3D geofence using smartphone. The proposed mechanism identifies the position information on 3D geofence regardless of indoor or outdoor, inter-floor with only GPS and WiFi. In the near future, 3D geofence as well as LBS are promising applications that become possible when IoT can become organized and connected by location.