• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.644-650
• /
• 2005

The expected positioning accuracies of civil users utilizing modernized GPS and Galileo are derived using the error analysis in this paper. Since, in general, the performance of DLL, PLL and FLL is proportional to chip lengths and wavelengths, the positioning accuracies from various measurements of modernized GPS and Galileo are derived as function of chip length and wavelength. These results are compared with that from GPS Ll measurement. In absolute positioning, compared to GPS C/A code only case, more than 17 times performance improvement is expected when all civil code signals of modernized GPS and Galileo (L1, L2, L5, E1, E5A and E5B) are used. In relative positioning, compared to GPS L1 carrier phase only case, more than 2 times performance improvement is expected when all civil signals of modernized GPS and Calileo are used. Furthermore, the relationship between GDOP and RGDOP in single frequency case is expanded to general case where multiple frequencies and both code and carrier phase measurements are used.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.869-875
• /
• 2016

In this paper, a novel scheme with which to mitigate a repeat-back jamming effect is proposed for the GPS L1 coarse/acquisition signal. The proposed scheme estimates the code tracking bias caused by repeat-back jamming signals using a Combined Pseudo-random noise signal. It then mitigates the repeat-back jamming effect by subtracting the estimated code timing on a normal correlation channel from the estimated value. Through a Monte-Carlo simulation, the proposed scheme can diminish the running average of code tracking bias to less than 10% of the bias using the conventional scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2632-2635
• /
• 2003

This paper designs a software signal generator for the new GPS L2 civil signal. The CM/CL code and the message structure of L2CS described in GPS ICD PPIRN-200C-007 are used in designing the signal generator. The output of the GPS signal generator is designed as the sampled IF data with the sampling frequency 5.7MHz and stored in the binary data format. By analyzing both the spectrum characteristics of the output signal and the correlation properties of the CM/CL code, the validation of the designed GPS signal generator is shown. It should be mentioned that the modeling of the GPS satellite constellation and the error sources remains for implementing the software space segment of GPS.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.158-165
• /
• 1990

We have developed a L1 band (1575.42 MHz), C/A (Coarse/Acquisition) code GPS (Global Positioning System) receiver for precise time comparison and evaluated the performance of the receiver. The GPS measurements have been carried out between cesium clocks onboard the GPS satellites and the master clock of Korea Standards Research Institute (KSRI) using the GPS receiver. An accuracy of time transfer better than 100ns was obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.283-288
• /
• 2011

In this paper, an adaptive signal tracking loop for a GPS L1/L2C/L5 receiver is designed. The design parameters is adjusted according to the receiver's operating conditions such as the signal strength and the receiver dynamics by using the different characteristics of GPS L1, L2C and L5 signal. Simulation results show that the tracking accuracy of the proposed signal tracking loop is better than those of L1, L2C and L5 only signal tracking loop.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.234-239
• /
• 2015

This paper focuses on analyzing the modern warfare and weapon systems supported by improved GPS informations. The GPS capability was investigated through the real experimental test for verifying the most recent GPS features under its modernization processing. And then it was verified that such capabilities, accuracy and availability, of a typical L1, C/A code GPS receiver are equivalent to the military receiver's ones. It was also sure that the influence of GPS improved informations on NCW(Network-Centric Warfare), PGM(Precision Guided Munition) and C4SIR(Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance) should be increased and the modern warfare may be strongly dependent on GNSS informations.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.146-146
• /
• 2000

This paper presents field test results of the GPS precise positioning using carrier phase observable. The Least-squares AMBiguity Decorrelation Adjustment(LAMBDA) method is implemented to resolve integer ambiguity problem for two epoch Ll carrier phase measurement data. Field test results show that the GPS precise positioning of cm-level accuracy is obtainable with conventional low cost, single frequency C/A code GPS receivers.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2011

In this paper, code and carrier tracking error which resulted from spoofing signal was analyzed by simulation. For a start, the types of spoofing signals and methods were classified. For the simulation, search spoofing method is assumed because a perfect position and velocity are not generally informed to spoofing device. In most cases, the tracking error is increased but a complete deception does not happen because of the inherent anti-spoofing characteristics of the GPS signal.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2436-2438
• /
• 2000

In this paper, field test results of a new efficient integer ambiguity resolution algorithm for precision Carrier Differential GPS(CDGPS) positioning are presented. The new algorithm is based on a reconfiguration Kalman filter which is designed to be used for the real-time precise positioning with low cost, single frequency, conventional C/A code GPS receivers. The tests were performed both in static and kinematic environment