• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2011

In this paper, code and carrier tracking error which resulted from spoofing signal was analyzed by simulation. For a start, the types of spoofing signals and methods were classified. For the simulation, search spoofing method is assumed because a perfect position and velocity are not generally informed to spoofing device. In most cases, the tracking error is increased but a complete deception does not happen because of the inherent anti-spoofing characteristics of the GPS signal.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1997

A multi-channel digital GPS receiver has been developed including a RF-to-IF engine (engine 1), a digital signal processing engine (engine 2) with a microprocessor interfacing, and a navigation software. A high speed SiGe heterojunction bipolar transistor (HBT) as a active device has been mounted on chip-on-board (COB) type hybrid ICs such as LNA, mixer, and VCO in RF front-end of the engine 1 board. A 6-channel digital correlator together with a real-time clock and a microprocessor interface has been realized using an Altera Flex 10K FPGA as well as ASIC technology. Navigation software controlling the correlator for GPS signal tracking, retrieval and storing a message retrieval, and position calculation has been implemented. The GPS receiver was tested using a single channel STR2770 simulator. Successful navigation message retrieval and position determination was confirmed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.431-437
• /
• 2024

Drones in the contemporary landscape have transcended their initial public utility, expanding into various industries and making significant inroads into the private sector. The majority of commercially available drones are presently equipped with GPS receivers to relay location signals from artificial satellites, aiming to inform users about the drone's whereabouts. However, a notable drawback arises from the considerable distance over which these location signals travel, resulting in a weakened signal intensity. This limitation introduces vulnerabilities, allowing for the possibility of location manipulation and jamming attacks if the drone receives a stronger signal than the intended location signal from satellites. Thus, this paper focuses on the safety assessment of drones relying on GPS-based location acquisition and addresses potential vulnerabilities in wireless communication scenarios. Targeting commercial drones, the paper analyzes and empirically demonstrates the feasibility of GPS spoofing attacks. The outcomes of this study are anticipated to serve as foundational experiments for conducting more realistic vulnerability analysis and safety evaluations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.350-356
• /
• 2014

In this paper, we design a local signal to improve a tracking performance of time-multiplexed binary offset carrier (TMBOC) signal, which was adopted in modernized global positioning systems (GPS). Specifically, considering that TMBOC signal includes BOC(6,1) components, we first obtain local signal by evenly dividing sub-carrier of TMBOC(6,1,4/33) by the period of a BOC(6,1) pulse. Finally, we remove side-peaks of TMBOC(6,1,4.33) autocorrelation via combination of partial correlations given from designed local signal and solve the ambiguity problem. From numerical results, when performing signal tracking using the designed local signal, we demonstrate that the improved tracking error standard deviation (TESD) performance is offered as compared its autocorrelation and the conventional correlation functions.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.121-129
• /
• 2023

In this paper, we developed a traffic signal control system for emergency situations that can minimize loss of property and life by actively controlling traffic signals in a certain section in response to emergency situations. When the emergency vehicle terminal transmits an emergency signal including identification information and GPS information, the surrounding image is obtained from the camera, and the object is analyzed based on deep learning to output object information having information such as the location, type, and size of the object. After generating information tracking this object and detecting the signal system, the signal system is switched to emergency mode to identify and track the emergency vehicle based on the received GPS information, and to transmit emergency control signals based on the emergency vehicle's traveling route. It is a system that can be transmitted to a signal controller. This system prevents the emergency vehicle from being blocked by an emergency control signal that is applied first according to an emergency signal, thereby minimizing loss of life and property due to traffic obstacles.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.361-367
• /
• 2010

We produced continuous vertical time series of 14 permanent GPS stations operated by National Geographic Information Institute by processing about five years of data. Then we computed the height velocities by using a linear regression fitting of those time series, and did principal component analysis to understand the overall characteristics of the series. The prominent signal obtained as the first mode of PCA results showed an average of 4.2 mm/yr vertical velocity. The values of the first mode eigenvectors were consistent at all sites. Thus, we concluded that all the 14 stations are uplifting nearly at the same velocity for the test period. Then changes of precision before and after removing the first mode signal from the 14 height time series were analyzed. As a result, the precision improved 34.8% on average.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.555-557
• /
• 1998

본 연구에서는 PCS(개인통신서비스)를 이용한 신호처리를 하기위한 시스템의 구축과 그의 응용에 관해서 알아보고자 한다. 신호처리를 위해서는 GPS(Global Positioning System)신호를 사용하였으며 그 응용을 위해서 GIS(Geographic Information System)를 이용하고자 한다. GPS(Global Positioning System)는 안테나 및 엔진을 이용하여 이동 물체의 현재의 위치를 파악하는 위치판별시스템이다. 종래에는 이러한 시스템의 통신을 위해서 RF 무선통신을 이용하였으나 본 연구에서는 PCS(Personal Communication Service)를 이용하여 통신을 함으로써 이러한 위치정보시스템을 설치하는 비용을 최소화 할 수 있는 방안을 강구하여 실용성 있는 시스템을 개발하고자 한다. 또한 이동체의 GPS신호를 기지국이나 기타 다른 이동체의 PCS에서도 송신할 수 있는 다중통신 시스템을 갖추고자 하며 이를 위해서 수신국은 PCS 뿐만 아니라 유선전화망을 이용할 수 있게 개발 하고자 한다. 한편 개발된 시스템을활용하기 위해서 기존의 GIS(Geographic Information System)에의 적용을 위한 기초실험을 하고자 한다.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.877-882
• /
• 2005

It is necessary that Fail-Safe Seaway technology providing a continuous navigation solution though fault of navigation system is occurred in sea. This paper focus on signal processing of GPS receiver, one of receivers using the software radio technology to implement a integrated radio navigation system including satellite-based and ground-based navigation systems. It is difficult to implement the software GPS receivers using a commercial processor because of the heavy computational burden for processing the GPS signals in real time. This paper proposes an efficient multi-bit GPS signal processing scheme to reduce the computational burden for processing the GPS signals in the software GPS receiver. The proposed scheme uses a compression concept of the multi-bit replica signals and patterned look-up table method to generate the correlation value between the GPS signals and the replica signals.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.37-42
• /
• 2005

It is necessary that Fail-Safe Seaway technology providing a continuous navigation solution though fault of navigation system is occurred in sea. This paper focus on signal processing of GPS receiver, one of receivers using the software radio technology to implement a integrated radio navigation system including satellite-based and ground-based navigation systems. It is difficult to implement the software GPS receivers using a commercial processor bemuse of the heavy computational burden for processing the GPS signals in real time. This paper proposes an efficient multi-bit GPS signal processing scheme to reduce the computational burden for processing the GPS signals in the software GPS receiver. The proposed scheme uses a compression concept of the multi-bit replica signals and patterned look-up table method to generate the correlation value between the GPS signals and the replica signals.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.223-225
• /
• 2014

본 논문에서는 단일주파수망에서 다수의 송신기로부터 전송되는 방송신호 간의 주파수를 일치시키기 위한 방법을 제안한다. 다수의 송신기로 동일한 송신채널을 통해 콘텐츠를 전송하는 경우 신호가 중첩되는 지역에서 주파수를 정확히 일치시키지 않으면 도플러효과가 야기되어 수신성능이 현저히 저하된다. 일반적으로 GPS 기준신호를 송신시스템의 참조주파수로 사용함으로써 방송신호 간의 주파수를 일치시킨다. 이 경우 GPS 기준신호로부터 복원된 참조주파수를 주파수 상하향 변환에 사용하면 위상지터가 증폭되어 방송신호 간의 순간적인 주파수 차이가 크게 발생할 수 있다. 이를 해결하기 위해 본 논문에서는 GPS 참조주파수보다 위상지터가 작은 송신기 자체의 국부발진기 주파수를 주파수 상하향 변환에 사용하는 한편 국부발진기 자체의 주파수 오차를 상쇄함으로써 방송신호 간의 주파수를 일치시킨다.