• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.431-435
• /
• 2003

GPS측량 방법은 크게 나누어 후처리 방법과 실시간 처리 방법으로 구분되며 후처리 방법은 다시 Static, Stop＆Go 및 동적(Kinematic) 방법으로 세분되고 실시간 처리 방법은 DGPS(Differential GPS)와 RTK(Realtime Kinematic) 방법으로 세분된다. 이와 같은 여러 가지 측량법 중 우리나라의 실무에서는 유독 후처리 방법 중의 Static 측량과 실시간 처리방법중의 DGPS 측량이 주로 사용되어 왔는데, 그런 배경에는 여러 가지 원인이 있으나 무엇보다도 가장 큰 원인은 공공측량 작업규정 등의 측량 관련 법규에서 다양한 종류의 GPS측량기법을 제도적으로 인정하지 못함으로 인하여 일반 측량기술자들의 GPS에 대한 인식이 결여된 때문이라 볼 수 있다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.3-8
• /
• 2002

현장에서 GPS 측량을 하였을 때 그 측량성과를 처리할 수 있는 장소로 이동을 한 후 측량결과를 확인해야 하며, 만약 측량이 잘못 되었다는 결과가 나오면 재 측량을 해야하는 상황이 발생한다. 이와 같은 경우가 생기면, 계획했던 시간과 경비의 소요가 더 많아지게 되므로 작업의 손실이 생기는 것은 당연하다. 본 연구에서는 이러한 작업의 손실을 최소화하기 위한 방법으로 GPS 측량을 한 현장에서 바로 측량성과의 가용성 여부를 결정해 줄 수 있는 소프트웨어 개발을 연구하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.65-70
• /
• 2011

National Geographic Information Institute provides VRS service using permanent GPS networks. VRS-RTK(Virtual Reference System-Real Time Kinematic)GPS surveying which enable to accomplish the real time-based GPS surveying has been increasingly popular. However the positioning accuracy tends to deteriorate as the distance between the rover and base station increases in the VRS-RTK GPS surveying. To analysis this problem in this study, the accuracy of VRS-RTK data was analyzed with 2 different test sites of Geoje city, Gyeongnam province within and without the permanent GPS networks in order to accomplish the cadastral supplementary control surveying. As a result of surveying accuracy analysis at two test sites, positioning errors were ${\pm}0.03m$(RMSE) in both sites. The result was that within the tolerance specified in cadastral surveying law, and indicated the possibility of VRS-RTK GPS surveying in cadastral surveying.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2001

For a high resolution real-time kinematic GPS surveying using carrier phase, positioning accuracy according to the OTF initialization was better than 1 cm with more than 5-minute initialization within 20 km baseline. Also, it is recommended that measurements be carried out when PDOP and RDOP can be kept less than 4.0 since the geometrical layout of satellites has a great influence on the positioning accuracy. After considering the initial conditions and measuring time zone for real-time kinematic GPS. post-processed continuous kinematic GPS and real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller at the time of measurement. As a result, it has been revealed that possible noise in surveying could be corrected and the accuracy could be improved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.373-381
• /
• 2003

This study presents the detailed methods for facilities mapping using GPS and Totalstation. From the control survey by GPS network adjustment, the level of significance fur the height value of fourth order triangulation stations used in this study was estimated about 10cm. According to the result of verification for the transformation coefficients of national coordinate, which were announced by the National Geographic Information Institute, RMSE f coordinate transformation was found out as $\pm$0.546m that can be applied to a map scale less than 1/10,000. The accuracy analysis of height determination by Totalstation for the traverse points spaced average 90m showed that RMSE came out $\pm$9mm on the basis of direct leveling, so it indicated that trigonometric leveling by Totalstation was correct comparatively. The result of accuracy analysis of GPS/RTK surveying on traverse points showed that RMSE came out $\pm$33mm in horizontal location on the basis of Totalstation's outcome and $\pm$15mm in height value on the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than Totalstation surveying in the feasible areas of GPS surveying. but there were many impossible areas for GPS/RTK surveying by the obstacles like a building.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.187-193
• /
• 2006

With the development of technology the Global Positioning System(GPS) measurement method which uses the artificial satellites to locate its position has been adopted in construction projects. Especially in civil engineering projects which have not any base points needed to measure their position they use the GPS measurement method has been put to practical use. But it was still difficult to use that method in building construction sites which require more accurate measurement data than the current GPS measurement method can provide. In this paper we introduce a new GPS measurement method adopted in Burj Dubai project which would be the tallest building in the world after its completion.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.87-96
• /
• 2007

In the numerical cadastral surveying field, the cadastral surveying would be measured with the Total Station surveying (electronic plane table surveying) system that consist the Total Station for surveying and the computing system for recording and editing the measured coordinates data by the TS. This study would suggest the advanced method, which is used on the RTK-GPS instead of TS for surveying and the computing system for handling the coordinates data and mapping. As a result of this study, although the measurement accuracy of the RTK-GPS and TS surveying make no greate difference, the suggested method reduces the cost of time and work force with the TS surveying. Besides, the new survey method would be more efficient due to directly handling the data and mapping in the field.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.149-157
• /
• 2009

The orbit ephemeris of Global Positioning System(GPS) is one element to determine the surveying accuracy and there are broadcasting ephemeris and precise ephemeris, IGS rapid orbit and IGS ultra rapid orbit in the orbit ephemeris of GPS. In this study, test area was selected in Uljin, Kyungsanbukdo and GPS surveying was accomplished at 37 points in the test area. Then baseline solution was done on 74 baseline using broadcasting ephemeris and precise ephemeris and analysis by TGO and the results were compared. Comparison results were showed that there were nearly no difference between the two results but in case of relative precision of the baseline, it was slightly better the baseline results of precise ephemeris which showed 0.706ppm than the baseline results of broadcasting ephemeris which showed 0.708ppm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.301-309
• /
• 1999

Real-time kinematic (RTK) GPS surveying which allows centimeter level accuracy of three-dimensional coordinates without post-processing has become recognized as a major advance in GPS technology. Employing On-The-Fly initialization technique, the RTK system can escape from cycle slip problems that have affected as a main obstacle factor in traditional kinematic and static approaches. The objective of this research was to evaluate accuracy and effectiveness of the RTK-GPS surveying. First, the continuous RTK observation of a base line was conducted for the purpose of finding out the repeatability of the RTK surveying and the results which were then compared against results from static surveying showed RMS errors of $\pm{3mm}\;and\;\pm{13mm}$ for their respective horizontal and vertical components. On a test network of 30 stations covering the small area, the results of RTK testing were compared against those from not only post-processing kinematic and rapid-static surveyings but conventional surveyings and also the efficiency of RTK were analyzed. In addition, geoid heights which were derived by combination of GPS and spirit leveling about all of the points within the network were compared against those derived by the PNU95 and EGM96 models respectively.