Abstract
This study presents the detailed methods for facilities mapping using GPS and Totalstation. From the control survey by GPS network adjustment, the level of significance fur the height value of fourth order triangulation stations used in this study was estimated about 10cm. According to the result of verification for the transformation coefficients of national coordinate, which were announced by the National Geographic Information Institute, RMSE f coordinate transformation was found out as $\pm$0.546m that can be applied to a map scale less than 1/10,000. The accuracy analysis of height determination by Totalstation for the traverse points spaced average 90m showed that RMSE came out $\pm$9mm on the basis of direct leveling, so it indicated that trigonometric leveling by Totalstation was correct comparatively. The result of accuracy analysis of GPS/RTK surveying on traverse points showed that RMSE came out $\pm$33mm in horizontal location on the basis of Totalstation's outcome and $\pm$15mm in height value on the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than Totalstation surveying in the feasible areas of GPS surveying. but there were many impossible areas for GPS/RTK surveying by the obstacles like a building.
본 연구에서는 GPS 및 토털스테이션 측량을 시설물 현황도 작성에 적용하기 위한 구체적인 방법을 제시하였다. GPS 망조정에 의한 기준점측량 결과 본 연구에 사용된 4등 삼각점의 표고 신뢰도가 약 l0cm 이내임을 알 수 있었다. 또한, 국토지리정보원에서 공고한 국가좌표 변환계수에 대한 검증결과 평균제곱근오차가 $\pm$0.546m로 나타나 1/10,000 이하의 축척에 적용할 수 있음을 확인할 수 있었다. 측점간 평균거리가90m인 도근점에 대하여 토털스테이션의 표고결정 정확도를 분석한 결과, 직접수준측량의 성과를 기준으로 평균제곱근오차가 $\pm$9mm로 나타나 토털스테이션에 의한 간접수준측량도 비교적 정확함을 알 수 있었다. 또한 도근점을 이용하여 GPS/RTK 방법의 정확도 분석을 실시한 결과 평균제곱근오차는, 수평위치에 대하여 토털스테이션의 성과를 기준으로 $\pm$33mm, 표고에 대해서는 직접수준측량의 성과를 기준으로 $\pm$15mm로 나타났다. 현황측량에 대하여 토털스테이션과 GPS/RTK측량을 비교한 결과, GPS 측량이 가능한 지역에서는 토털스테이션보다 GPS/RTK 측량방법이 더욱 신속하고 경제적이나, GPS 현황측량은 건물 등에 의해 측량이 불가능한 지역이 많음을 알 수 있었다.