• Spatial Information Research
• /
• 제13권4호
• /
• pp.373-380
• /
• 2005

모바일매핑시스템은 차량에 GPS(Global Positioning System), IMU(Inertial Measurement Unit), CCD 등을 탑재하고 대상에 관한 위치 및 영상 정보를 취득하는 효율적인 시스템이다. 모바일매핑시스템은 현재 도로 시설물 관리, 지도 갱신 등 다양한 분야에 활용되고 있으며 앞으로 그 활용도가 더욱 증가할 것으로 보인다. 항공사진측량과 같은 기존의 일반적인 사진측량의 경우, 영상 외부표정요소를 구하기 위해서는 지상기준점이 필요하다. 이러한 기준점들은 자료취득 전후에 현장측량을 통해 좌표가 결정되는데 일반적으로 많은 비용과 시간이 소요되고, 사실 영상을 취득할 도로를 따라 필요한 만큼 충분히 많은 기준점을 설치한다는 것도 거의 불가능하다. 하지만 모바일매핑 시스텔의 경우 GPS/INS를 이용해 영상촬영당시의 카메라의 위치 및 자세, 즉 외부표정요소를 직접적으로 구할 수 있어 시간과 비용 면에서 훨씬 효율적이다. 즉 외부표정요소를 결정하기 위해 영상표정기법은 지상기준점이 필요한 반면, 직접위치참조기법은 GPS/INS를 이용해 직접 외부표정요소를 구할 수 있다. 본 논문에서는 영상표정 기법과 직접위치참조기법에서 산출되는 영상외부표정요소를 이용해 지상점의 위치정확도에 대해 비교 분석해 보았다.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.319-341
• /
• 2016

Objective:This research analyzed the lower-limb motion in kinetic and kinematic way while walking on various terrains to develop Foot-Ground Contact Detection (FGCD) algorithm using the Inertial Measurement Unit (IMU). Background: To estimate the location of human in GPS-denied environments, it is well known that the lower-limb kinematics based on IMU sensors, and pressure insoles are very useful. IMU is mainly used to solve the lower-limb kinematics, and pressure insole are mainly used to detect the foot-ground contacts in stance phase. However, the use of multiple sensors are not desirable in most cases. Therefore, only IMU based FGCD can be an efficient method. Method: Orientation and acceleration of lower-limb of 10 participants were measured using IMU while walking on flat ground, ascending and descending slope and stairs. And the inertial information showing significant changes at the Heel strike (HS), Full contact (FC), Heel off (HO) and Toe off (TO) was analyzed. Results: The results confirm that pitch angle, rate of pitch angle of foot and shank, and acceleration in x, z directions of the foot are useful in detecting the four different contacts in five different walking terrain. Conclusion: IMU based FGCD Algorithm considering all walking terrain possible in daily life was successfully developed based on all IMU output signals showing significant changes at the four steps of stance phase. Application: The information of the contact between foot and ground can be used for solving lower-limb kinematics to estimating an individual's location and walking speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.948-950
• /
• 1999

In this paper, a monitoring system is desigend for a GPS/INS integration system. The function of the monitoring system is to acquire real-time data from system and displayed them. The monitoring system supervises the operation of navigation system. Visual C++ was used in the implementation. The performance of the monitoring system was verified through a real-time test for a GPS/INS Integration system which is composed of a GPS Receiver. IMU(Inertial Measurement Unit), NCU (Navigation Computer Unit)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.94-94
• /
• 2000

In this paper, the performance of INS/GPS integration is analyzed. Generally the integration method is classified into two method. One is loosely coupled integration, Another is tightly coupled integration. For the simulation, the error model of Kalman fitter is defined and the result of simulation is analyzed. When the number of visible satellites is less than four, the error of tightly coupled integration is smaller than that of loosely coupled integration. To very the result of simulation, van test that use LP-81 IMU and Millen3151R GPS receiver is carried out.

• 한국항공운항학회지
• /
• 제10권1호
• /
• pp.35-44
• /
• 2002

Inertial Navigation System(INS) has been used in the field of air navigation for a long time but is not popular in general aviation due to high price. Recently low-price GPS is available but vulnerable to radio interference. As an alternative on these problems, GPS/INS integrated navigation system has been considered. GPS/INS is capable of implementing navigation with low-price inertial sensors but its accuracy is dependent upon how much drift of INS may be calibrated by using GPS. In order to apply GPS/INS to air navigation, it must be investigated how long drift of INS in case of no GPS aiding will be bounded within requirements for safe flight. From the above motivation, the flight test for GPS/INS navigation system was conducted in order to make sense its performance in air navigation and its result was shown.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.77-81
• /
• 2006

GPS cannot determine random errors such as multipath and signal cutoff caused by surrounding environment that determines the visibility of satellites and the speed of data creation and transmission is lower than the speed of vehicles, it is difficult to determine accurate dynamic positions. Thus this study purposed to implement a method of deciding the accurate dynamic position of vehicles by combining AHRS (Attitude Heading Reference System) IMU (Initial Measurement Unit) based on low-priced MEMS (Micro Electro Mechanical System) in order to provide the information of attitude, position and speed at a high transmission rate without external help. This study conducted an initialization test to decide dynamic position using AHRS IMU sensor, and derived attitude correction angles of vehicles against time through regression analysis. The roll angle was $y=(A{\times}10^{-6})x^2 -(B{\times}10^{-5})x+Cr{\times}10^{-2}$ and the pitch angle was $y=(A{\times}10^{-6})x^2-(B{\times}10^{-7})x+C{\times}10^{-2}$, each of which was derived from second-degree polynomial regression analysis. It was also found that the heading angle was stabilized with variation less than $1^{\circ}$ after 60 seconds.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.179-186
• /
• 2015

In this paper, a novel lateral control system is proposed for the purpose of improving lane keeping performance which is independent from GPS signals. Lane keeping is a key function for the realization of unmanned driving systems. In order to obtain this objective, a vision sensor based real-time lane detection scheme is developed. Furthermore, we employ a data fusion along with a real-time steering angle of the test vehicle to improve its lane keeping performance. The fused direction data can be obtained by an IMU sensor and vision sensor. The performance of the proposed system was verified by computer simulations along with field tests using MOHAVE, a commercial vehicle from Kia Motors of Korea.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.186-196
• /
• 1999

The CPS provides data with long-term stability independent of passed time and the INS provides high-rate data with short-term stability. By integrating these complementary systems, a highly accurate navigation system can be achieved. In this paper, a loosely-coupled GPS/INS integration system is designed. It is a simple structure and is easy to implement and preserves independent navigation capability of GPS and INS. The integration system consists of a NCU, an IMU, a GPS receiver, and a monitoring system. The navigation algorithm in the NCU is designed under the multi-tasking environment based on a real-time kernel system and the monitoring system is designed using the Visual C++. The integrated Kalman filter is designed as a feedback formed 15-state filter, in which the states are position errors, velocity errors, attitude errors and sensor bias errors. The van test result shows that the integrated system provides more accurate navigation solution then the inertial or the GPS-alone navigation system.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권2호
• /
• pp.53-62
• /
• 2014

In the guided missile and unmanned vehicle system, the navigation system is one of the most important components. Recently, low-cost effective smart projectiles and guided bomb are being developed using MEMS based navigation system which has high-G, low-cost and small size. In this paper, locally developed MEMS based GPS/INS integrated navigation system will be introduced in comparison with the state of the art of MEMS based navigation system. And technical design and development method is described to satisfy the required performance of GPS receiver, MEMS inertial sensor assembly, navigation computer and software.

• 한국ITS학회 논문지
• /
• 제19권1호
• /
• pp.94-106
• /
• 2020

근래의 위치 측위 방법으로 GPS(Global Positioning System) 위성정보를 활용하는 전파항법 방식을 많이 사용하고 있다. GPS 활용범위가 넓어지고 다양한 측위 정보를 기반으로 하는 분야가 생기면서 보다 높은 정확도를 얻기 위한 새로운 방법들이 요구되고 있다. 자율주행차의 경우 IMU(Inertial Measurement Unit)를 사용한 항법 시스템인 INS(Inertial Navigation System)와 차량 내부 센서를 이용한 DR(Dead Reckoning) 알고리즘을 사용하여 GPS의 정확도 저하나 음영지역에서의 위치 측정방법으로 사용하고 있다. 그러나 이러한 측위 방법은 대형화되는 빌딩 지역, 터널, 지하 주차장 등 다양한 음영지역과 시간이 지남에 따라 오차가 계속 증가하는 누적 기반 위치추정 방법의 한계로 인해 많은 문제 요소가 있다. 본 논문은 GPS 음영지역에서 차량의 위치 측위를 위해, 대중적 무선 통신인 WLAN을 이용한 Fingerprint 기법을 4개의 Anchor 형태로 AP(Access Point)와 지향성 안테나를 위치하여 넓은 지하 주차공간에서 효율적인 측위 방법을 제시하고 시간이 지남에 따라 주차된 차량이 이동하는 환경에서도 변화가 없는 위치 측위 결과를 입증하였다.