• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.177-184
• /
• 2018

In case that limited resources can be mobilized, non-structural countermeasures such as 'monitoring using Information and Communication Technology might be one of solutions to mitigate disaster risks. Having established the monitoring system, operational and maintenance costs to maximize the effectiveness might trouble the authority concerned or duty attendant who is in charge. In this respect, "Guerrilla Sensor" would be very cost effective because of the inherent mobility characteristic. The sensor device with the IRIS camera and GPS (Global Positioning System) equipped, is basically battery-operated and communicates with WCDMA (Wideband Code Division Multiple Access). It has a strong advantage of capabilities for 'Disaster Response' with immediate and prompt action on the spot, making the best use of IoT (Internet of Things), especially with the mobile web. This paper will explain how the sensor system works in real-time GIS (Geographic Information System) pinpointing the exact location of the abnormal movement/ground displacement and notifying the registered users via SMS (Short Message Service). Real time monitoring with early warning and evaluation of current situations with LBS (Location Based Service), live image and data information can help to reduce the disaster impact. Installation of Guerrilla sensor for a real site application at Gimcheon, South Korea is also reported.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.83-88
• /
• 2006

Future communication systems are to be designed to support and serve multimedia and multipledata transmission. Nowadays, requirement of mobile subscribers for the various information such as movie, GPS(Global Positioning System) information, news-is increasing significantly. However, due to practical reasons, the capacity and number of capable channels are limited. To solve this problem, a large number of methods and schemes have been proposed and are under research. In this paper, we demonstrate how satellite DMB (Digital Multimedia Broadcasting) system works with hierarchical modulation scheme. By using hierarchical modulation, we can analyze the capacity. Meanwhile, system performance os evaluated and compared to conventional DMB system without using hierarchical modulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.79-84
• /
• 2011

In this paper, we analyzed performance of vehicle detection for ITS (Intelligent Transport System) applications. We simulated the vehicle detection at Hi-Pass System is based on DSRC (Dedicated Short Range Communication). DSRC is a wireless network using ITS, including GPS (Global Positioning System) satellites in conjunction with the national transportation system. The system performance is evaluated in terms of bit error probability. In the simulation, the vehicle speed is set at 60 km/h and carrier frequency is 5.8 GHz. Wireless channel is modeled as the Rician fading channel. In the transmitter, the ASK (amplitude shift keying) modulation scheme is applied. From simulation results, we confirmed that performance of applied Alamouti scheme is better than other systems.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.61-70
• /
• 2005

Conventional geological survey utilizes the manual compass for mass amount of measurements of the geologic structure. Portable multifunction digital compass system was required by more detailed geological survey, due to increasing construction for rock slopes and runnels. In this paper, the system was implemented by using Intel PXA 255 embedded board as a system controller, and was composed of tilting sensor, digital azimuth sensor, and Global Positioning System (GPS) module. After the measured location, strike, and the angle of dip with our implemented system were transmitted to Personal Digital Assistant (PDA) or notebook, these data could be used for geologic structure analysis. It is expected that the availability of cheap and improved digital compass will reduce the coast and time of geological survey extensively.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.161-169
• /
• 2022

With the development of mobile devices and global positioning systems, various location-based services can be utilized, which collects user's location information and provides services based on it. In this process, there is a risk of personal sensitive information being exposed to the outside, and thus Geo-indistinguishability (Geo-Ind), which protect location privacy of LBS users by perturbing their true location, is widely used. However, owing to the data perturbation mechanism of Geo-Ind, it is hard to accurately obtain the density distribution of LBS users from the collection of perturbed location data. Thus, in this paper, we aim to develop a novel method which enables to effectively compute the user density distribution from perturbed location dataset collected under Geo-Ind. In particular, the proposed method leverages Expectation-Maximization(EM) algorithm to precisely estimate the density disribution of LBS users from perturbed location dataset. Experimental results on real world datasets show that our proposed method achieves significantly better performance than a baseline approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.131-137
• /
• 2009

Binary offset carrier (BOC) signal synchronization is one of the most important steps to recover the transmitted information in global navigation satellite systems (GNSS) including Galileo and global positioning system (GPS). Generally, BOC signal synchronization is based on the correlation between the received and locally generated BOC signals. Thus, the multiple side-peaks in BOC autocorrelation are one of the main error sources in synchronizing BOC signals. Recently, a novel correlation function with reduced side-peaks was proposed for BOC signal synchronization by Julien [8]; however, Julien's correlation function not only still has the side-peaks, but also is only applicable to sine phased BOC(n, n), where n is the ratio of the pseudo random noise (PRN) code rate to 1.023 MHz. In this paper, we propose a new correlation function for BOC signal synchronization, which does not have any side-peaks and is applicable to general types of BOC signals, sine/cosine phased BOC(kn, n), where k is the ratio of a PRN chip duration to the period of a square wave sub-carrier used in BOC modulation. In addition, an efficient correlator structure is presented for generating the proposed correlation function.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.781-788
• /
• 2016

In this paper, a real-time on-board orbit determination algorithm using the high precise orbit propagator is suggested and its performance is analyzed. Orbit determination algorithm is designed with the Extended Kalman Filter. And it utilizes the orbit calculated from the Pseudo-range as observed data. The performance of the on-board orbit determination method implemented in the GPS-12 receiver is demonstrated using the GNSS simulator. Orbit determination performance using high precise orbit propagator was analyzed in comparison to the orbit determination result using $J_2$ orbit propagator. The analysis result showed that position and velocity error are improved from 43.61 m($3{\sigma}$) to 23.86 m($3{\sigma}$) and from 0.159 m/s($3{\sigma}$) to 0.044 m/s($3{\sigma}$) respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.183-189
• /
• 2009

Recently, PCS, PDA and mobile devices, such as the proliferation of spread, GPS (Global Positioning System) the use of, the rapid development of wireless network and a regular user even images, audio, video, multimedia data, such as increased use is for. In particular, video data among multimedia data, unlike the moving object, text or image data that contains information about the movements and changes in the space of time, depending on the kinds of changes that have sigongganjeok attributes. Spatial location of objects on the flow of time, changing according to the moving object (Moving Object) of the continuous movement trajectory of the meeting is called, from the user from the database that contains a given query trajectory and data trajectory similar to the finding of similar trajectory Search (Similar Sub-trajectory Retrieval) is called. To search for the trajectory, and these variations, and given the similar trajectory of the user query (Tolerance) in the search for a similar trajectory to approximate data matching (Approximate Matching) should be available. In addition, a large multimedia data from the database that you only want to be able to find a faster time-effective ways to search different from the existing research is required. To this end, in this paper effectively divided into a grid to search for the trajectory to the trajectory of moving objects, similar to the effective support of the search trajectory offers a new grid-based search techniques.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2021

Photogrammetry using drone can produce high-resolution ortho image and acquire high-accuracy 3D information, which is useful. Therefore, this study attempted to determine the possibility of using drone-photogrammetry in park construction by producing a topographic map using drone-photogrammetry and analyzing the problems and accuracy generated during production. For this purpose, we created ortho image and DSM (digital surface model) using drone images and created topographic status map by vectorizing them. Accuracy was compared based on topographic status map by GPS (global positioning system) and TS (total station). The resulting of analyzing mean of the residuals at check points showed that 0.044 m in plane and 0.066 m in elevation, satisfying the tolerance range of 1/1,000 numerical maps, and result of compared lake size showed a difference of about 4.4%. On the other hand, it was difficult to obtain accurate height values for terrain in which existed vegetation when producing the topographic map, and in the case of underground buried objects, it is not possible to confirm it in the image, so direct spatial information acquisition was necessary. Therefore, it is judged that the topographic status map using drone photogrammetry can be efficiently constructed if direct spatial data acquisition is achieved for some terrain.