• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.2
• /
• pp.1960-1964
• /
• 1970

Underdrainage has been studied by using PVC suction pipes in the low and wet Paddy field: Fist, three test plot and three control plots were set and drainage methods and Soil tempratures in the test plots have been examined. The experiment was conducted making use of the 'NONG-RIM No, 4'(Wheat) 'DOWON' (rice barley), a recommended variety. Test period was from September, to December, 1969. The experimental methodsand results obtained through this experimontation are as follows: 1) Ground water level in the test plot goes down by 34 cm. 2) In sprouting, control plot is earlier than test plot by three days. 3) The rate of sprouting is equal.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.270-276
• /
• 1996

As methane concentration was varied, the textures of diamond films deposited on Si(100)substrate were observed by XRD,SEM and Raman spectroscope. As a result, $O_{2}$ plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100)substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110)surface and the high quality diamond film with FWHM of Raman spectra being 3.8 $cm^{-1}$ / has been grown. As time goes by deposition time, the preferred orientation increases

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2010

In general, the performance of a component degrades as time goes by and failure of a component occurs when the performance degradation reaches a pre-specified level. It is difficult to obtain the failure time distribution data or the necessary number of failure data especially for the metal or machine part. Thus, a design of reliability qualification test based on performance distribution is more effective than failure time distribution. In this study, a performance-based reliability qualification test is developed and a numerical example is provided to illustrate the use of the developed reliability qualification test. This approach could be applied to many kinds of metal or machine part whose magnitude of strength could not be evaluated during at any random points but judgement can be made by only failure of the part. Besides, it is also possible that any parts which have a similar failure characteristics could be applicable to the developed reliability qualification test.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.2
• /
• pp.125-130
• /
• 2004

With development of information communications and network environments security importance to the informations deepen as time goes. In this viewpoint, cryptosystem is developing but proportionally cracking and hacking technology is developing Therefore, in this paper we proposed and designed block cryptosystem with byte variable operation. Designed cryptosystem based on byte operation is safe than existed cryptosystem because it is not generate the fixed DC and LC characteristics. Additionally, proposed cryptosystem have high processing rate and authenticated operation. Therefore proposed cryptosystem is considered to many aid in the network fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.806-812
• /
• 2003

The service providers of Internet have to work out a personalized contents service system focused on variety of customer's complex individuality. To effectively adopt individual customer's preference and actively adapt change of business situation, suppose an system of the service which emotional experience using emotional-based web design. In the experimental results, it is found that Internet service system implemented based on this idea is more effective than the existing systems in the view point of extension of customer's emotional satisfaction and visit duration time goes longer beyond that of the traditional systems.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.692-698
• /
• 1999

This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

• Publications of The Korean Astronomical Society
• /
• v.9 no.1
• /
• pp.21-38
• /
• 1994

We have developed a cylindrical mixing layer model of a stellar jet including cooling effect in order to understand an optical emission mechanism along collimated high velocity stellar jets associated with young stellar objects. The cylindrical results have been calculated to be the same as the 2D ones presented by Canto & Raga(1991) because the entrainment efficiency in our cylindrical model has been obtained to be the same value as the 2D model has given. We have discussed the morphological and physical characteristics of the mixing layers by the cooling effect. As the jet Mach number increases, the initial temperature of the mixing layer goes high because the kinetic energy of the jet partly converts to the thermal energy of the mixing layer. The initial cooling of the mixing layer is very severe, changing its outer boundary radius. A subsequent change becomes adiabatic. The number of the Mach disks in the stellar jet and the total radiative luminosity of the mixing layer, based on our cylindrical calculation, have quite agreed with the observations.

• Natural Product Sciences
• /
• v.9 no.4
• /
• pp.205-209
• /
• 2003

The Korean peninsula, located between the vast Chinese mainland and Japan, has a unique cultural background that goes back five thousand years. In ancient times, the region was deeply influenced by Chinese culture, and traditional medicine in Korea was no exception. The Korean character, HAN GUL (24 alphabets), was invented at in the early 1400s by The Great King Sejong (1397-1450) of the Chosun dynasty. But few changes were made to traditional medicines for about 500 years thereafter. At the start of the 20th century, missionaries from western countries introduced new concepts and techniques of medicine. During the last century, there was enormous development in modern medical sciences. Even today, however, natural medicine -including folk medicine (or traditional Chinese medicine) - plays an important role in Korean health care. In this paper, we will review and discuss traditional Korean medicines as it has evolved over the past three thousand years.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.300-304
• /
• 2003

기상위성은 그 특성상 다양한 Imager, Sounder, 그리고 여러 환경 테스트용 장비를 지니게 되며 일정한 시간동안 지구에 그 정보를 전송한다. 본 논문에서 제안된 수신 시스템은 현재 운영중인 아리랑위성 1호의 임무계획에 필요한 기상정보를 직접 획득하여 운영의 효율성을 높일 필요성에 의해서 GMS-5의 S-VISSR data 뿐만 아니라 2003년 4월 이후에 서비스를 할 것으로 예정된 GOES-9위성의 GVAR data도 역시 수신 및 처리를 할 수 있도록 설계되었다. Link budget 설계를 수행하여 최악의 경우에도 영상을 복원할 수 있는 통신링크가 제공되도록 설계하였고, 시스템 구성 모듈을 가능한 한 상용제품으로 사용하였다. 설치된 후에는 태양을 이용한 G/T의 값을 측정하여 설계치 보다 약1.608 향상된 시스템임을 검증하였고, 수신된 GMS-5의 S-VISSR 데이터를 성공적으로 처리함으로써 자체적으로 개발한 처리 소프트웨어를 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.127-133
• /
• 2006

Cold expansion method is used to protect a fatigue fracture from fastener hole in the structure and aerospace industry. Cold expansion is that an oversized tapered mandrel goes through the hole and produces a compressive residual stress as well as plastic deformation around the hole. Here, mandrel shapes are one of the factors which are influenced on the residual stress distribution by cold expansion method. This paper, according to mandrel shapes (diameter of mandrel, length of mandrel and length of taper), we are performed a finite element analysis of residual stress distribution by cold expansion method. From this study, it has been found that diameter of mandrel and length of taper are an important factor which was generated a low compressive residual stress surround of fastener hole by cold expansion method.