• 제목/요약/키워드: GOES-9

검색결과 257건 처리시간 0.023초

PVC관을 이용한 배수연구 (A Study on the Underdrainage of Wet Paddy Fields by Using P.V.C. Pipes)

  • 주재홍
    • 한국농공학회지
    • /
    • 제12권2호
    • /
    • pp.1960-1964
    • /
    • 1970
  • 본시험사업기간(本試驗事業期間)이 $9{\sim}2$월초(月初) 사이기 때문에 시험포장(試驗圃場)을 임대(賃貸)하여 흡수관리설공사(吸水管理設工事)가 끝나자 이어 장려품질(品質)인 맥류(麥類) 2종(種) (밀 : 농림 4호 쌀보리 : 도원)을 파종하고 발아상태(發芽狀態)와 초기생육(初期生育)만 조사(調査)하고 나머지는 내년(來年) $1{\sim}6$월(月) 사이에 조사(調査)를 완료(完了)하고 이어 벼의 시험(試驗)을 하기로 한다.

  • PDF

마이크로파 플라즈마 화학기상성장법에 의해 (110)면으로 배향된 다이아몬드막의 합성 (Synthesis of (110) oriented diamond films by microwave plasma enhanced chemical vapor deposition)

  • 박재철;박상현
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권3호
    • /
    • pp.270-276
    • /
    • 1996
  • As methane concentration was varied, the textures of diamond films deposited on Si(100)substrate were observed by XRD,SEM and Raman spectroscope. As a result, $O_{2}$ plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100)substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110)surface and the high quality diamond film with FWHM of Raman spectra being 3.8 $cm^{-1}$ / has been grown. As time goes by deposition time, the preferred orientation increases

  • PDF

성능분포에 기초한 신뢰성 인정시험 설계 (Design of Reliability Qualification Test based on Performance Distribution)

  • 권영일
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제10권1호
    • /
    • pp.1-9
    • /
    • 2010
  • In general, the performance of a component degrades as time goes by and failure of a component occurs when the performance degradation reaches a pre-specified level. It is difficult to obtain the failure time distribution data or the necessary number of failure data especially for the metal or machine part. Thus, a design of reliability qualification test based on performance distribution is more effective than failure time distribution. In this study, a performance-based reliability qualification test is developed and a numerical example is provided to illustrate the use of the developed reliability qualification test. This approach could be applied to many kinds of metal or machine part whose magnitude of strength could not be evaluated during at any random points but judgement can be made by only failure of the part. Besides, it is also possible that any parts which have a similar failure characteristics could be applicable to the developed reliability qualification test.

바이트 가변 연산기능을 가진 블록 암호시스템 설계에 관한 연구 (A Study on the Block Cryptosystem Design with Byte Variable Operation)

  • 이선근;정우열
    • 한국컴퓨터정보학회논문지
    • /
    • 제9권2호
    • /
    • pp.125-130
    • /
    • 2004
  • 정보통신과 네트워크의 발전으로 인하여 정보에 대한 보안의 중요성이 날이 갈수록 심화되고 있다. 이러한 시점에서 암호시스템들이 발전하고 있으나 비례적으로 크랙 및 해킹의 기술도 발전되고 있다. 그러므로 본 논문에서는 바이트 가변연산을 이용하여 블록암호시스템을 설계하였다. 설계된 바이트 기반 블록암호시스템은 고정된 DC 및 LC를 발생시키지 않으므로 이러한 공격방법으로부터 안전하다는 장점을 가진다. 또한 기존 대칭형 암호시스템이 가지고 있던 처리속도와 비대칭 암호시스템이 가지고 있던 인증기능을 모두 포함함으로서 네트워크 기반에서의 정보통신발달에 많은 도움을 주리라 사료된다.

  • PDF

웹 상에서의 차별화 된 서비스 제공을 위한 감성 기반 시스템에 관한 연구 (A Study of the System Based on Emotion for Differentiated Web Service)

  • 이준희;지홍일;최승권;조용환
    • 한국통신학회논문지
    • /
    • 제28권9B호
    • /
    • pp.806-812
    • /
    • 2003
  • 본 논문에서는 고객의 다양한 감성에 기반한 웹 디자인을 통해 사용자들로 하여금 새로운 경험을 체험하도록 정적과 동적 요소에 따른 16개의 감성 차원을 모델링하고 페이지 레이아웃, 배경색, 움직임 좌표 등의 감성 데이터베이스를 활용하여 고객의 선호 감성에 따라서 웹 페이지가 재구성되는 유무선 인터넷 서비스 시스템을 제안한다. 실험 결과 기존 시스템보다 세대별 감성 만족도 및 웹 사이트의 평균체류시간이 증가되었음을 모의 실험을 통해서 확인하였다.

분산형전원이 도입된 복합배전계통의 운용방안에 대한 고찰 (A Study on Operation Method of Power Distribution System Integrated with Dispersed Generation System)

  • 김재언;조성현
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권6호
    • /
    • pp.692-698
    • /
    • 1999
  • This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

  • PDF

항성 제트의 원통형 혼합층 모델 (CYLINDRICAL MIXING LAYER MODEL IN STELLAR JET)

  • 최승언;유경희
    • 천문학논총
    • /
    • 제9권1호
    • /
    • pp.21-38
    • /
    • 1994
  • We have developed a cylindrical mixing layer model of a stellar jet including cooling effect in order to understand an optical emission mechanism along collimated high velocity stellar jets associated with young stellar objects. The cylindrical results have been calculated to be the same as the 2D ones presented by Canto & Raga(1991) because the entrainment efficiency in our cylindrical model has been obtained to be the same value as the 2D model has given. We have discussed the morphological and physical characteristics of the mixing layers by the cooling effect. As the jet Mach number increases, the initial temperature of the mixing layer goes high because the kinetic energy of the jet partly converts to the thermal energy of the mixing layer. The initial cooling of the mixing layer is very severe, changing its outer boundary radius. A subsequent change becomes adiabatic. The number of the Mach disks in the stellar jet and the total radiative luminosity of the mixing layer, based on our cylindrical calculation, have quite agreed with the observations.

  • PDF

Traditional Medicine in Korea : The Past and the Present

  • Chung, See-Ryun;Lee, Seung-Ho;Jeune, Kyung-Hee;So, Myung-Suk
    • Natural Product Sciences
    • /
    • 제9권4호
    • /
    • pp.205-209
    • /
    • 2003
  • The Korean peninsula, located between the vast Chinese mainland and Japan, has a unique cultural background that goes back five thousand years. In ancient times, the region was deeply influenced by Chinese culture, and traditional medicine in Korea was no exception. The Korean character, HAN GUL (24 alphabets), was invented at in the early 1400s by The Great King Sejong (1397-1450) of the Chosun dynasty. But few changes were made to traditional medicines for about 500 years thereafter. At the start of the 20th century, missionaries from western countries introduced new concepts and techniques of medicine. During the last century, there was enormous development in modern medical sciences. Even today, however, natural medicine -including folk medicine (or traditional Chinese medicine) - plays an important role in Korean health care. In this paper, we will review and discuss traditional Korean medicines as it has evolved over the past three thousand years.

정지궤도 기상위성 수신시스템 개발 (Geo-stationary Meteorological Satellite Receiving System Development)

  • 박덕종;양형모;구인회;현대환;강치호;안상일
    • 한국GIS학회:학술대회논문집
    • /
    • 한국GIS학회 2003년도 공동 춘계학술대회 논문집
    • /
    • pp.300-304
    • /
    • 2003
  • 기상위성은 그 특성상 다양한 Imager, Sounder, 그리고 여러 환경 테스트용 장비를 지니게 되며 일정한 시간동안 지구에 그 정보를 전송한다. 본 논문에서 제안된 수신 시스템은 현재 운영중인 아리랑위성 1호의 임무계획에 필요한 기상정보를 직접 획득하여 운영의 효율성을 높일 필요성에 의해서 GMS-5의 S-VISSR data 뿐만 아니라 2003년 4월 이후에 서비스를 할 것으로 예정된 GOES-9위성의 GVAR data도 역시 수신 및 처리를 할 수 있도록 설계되었다. Link budget 설계를 수행하여 최악의 경우에도 영상을 복원할 수 있는 통신링크가 제공되도록 설계하였고, 시스템 구성 모듈을 가능한 한 상용제품으로 사용하였다. 설치된 후에는 태양을 이용한 G/T의 값을 측정하여 설계치 보다 약1.608 향상된 시스템임을 검증하였고, 수신된 GMS-5의 S-VISSR 데이터를 성공적으로 처리함으로써 자체적으로 개발한 처리 소프트웨어를 검증하였다.

  • PDF

형상봉의 모양이 홀확장 잔류응력 분포에 미치는 영향에 대한 유한요소해석 (The Finite Element Analysis of the Mandrel Shape's Influence on the Residual Stress Distribution by Cold Expansion Method)

  • 장재순;조명래;양원호
    • 한국정밀공학회지
    • /
    • 제23권9호
    • /
    • pp.127-133
    • /
    • 2006
  • Cold expansion method is used to protect a fatigue fracture from fastener hole in the structure and aerospace industry. Cold expansion is that an oversized tapered mandrel goes through the hole and produces a compressive residual stress as well as plastic deformation around the hole. Here, mandrel shapes are one of the factors which are influenced on the residual stress distribution by cold expansion method. This paper, according to mandrel shapes (diameter of mandrel, length of mandrel and length of taper), we are performed a finite element analysis of residual stress distribution by cold expansion method. From this study, it has been found that diameter of mandrel and length of taper are an important factor which was generated a low compressive residual stress surround of fastener hole by cold expansion method.