• 제목/요약/키워드: GLOBE program

검색결과 35건 처리시간 0.022초

국내 글로브 프로그램 운영 현황 및 지도교사들의 인식 (The Present Situation and Science High School Teachers' Perception about Field Application of the GLOBE Program in Korea)

  • 이문원;김화성
    • 한국지구과학회지
    • /
    • 제31권1호
    • /
    • pp.63-70
    • /
    • 2010
  • 이 연구는 글로브 프로그램이 운영되고 있는 과학고의 교사에게 설문지 및 면담을 통하여, 과학고에서의 글로브 프로그램 운영 현황과 교사들의 인식을 분석하였다. 그 결과를 토대로 우리나라에서 글로브 프로그램의 운영에 따른 문제점과 그 해결 방안을 논의하는 데 목적이 있다. 이 연구는 12명의 과학고 교사의 설문과 3명의 교사 면담 및 글로브 프로그램의 운영과정에서 나온 보고서 등의 분석으로 이루어졌다. 프로그램의 운영 현황, 교사들의 인식과 프로그램 운영에 따른 문제점에 대한 결과는 다음과 같다: 1) 글로브 프로그램은 초등학교 고학년 및 중학교에 적합한 수준이며, 과학고에서 그대로 운영하기에는 적합하지 않다. 2) 글로브 프로그램을 국내에 정착시키기 위해서는 우리나라에서 각 학교의 환경과 지역성을 고려한 다양한 프로그램의 개발이 필요하다. 프로그램의 운영에 대한 제언은 다음과 같다: 1) 우리나라의 교육실정에 맞는 글로브 프로그램을 개발-운영하기 위해서는 지구환경과 관련된 단체 및 전문가 집단이 되는 운영 본부의 설치가 요구된다. 2) 글로브 프로그램의 운영을 위한 행-재정 지원이 있어야 한다.

공기구동형 글로브 밸브의 3차원 유동 해석 (3D Flow Analysis of Globe Valve with Air Operated Actuator)

  • 정민호;양상민;이호영
    • 한국유체기계학회 논문집
    • /
    • 제8권4호
    • /
    • pp.7-13
    • /
    • 2005
  • Although the globe is the most typical valve to control high pressure drop in piping system, it is very hard to figure out the characteristics of flow field in the globe valve caused by its complex geometry, So there is very few studies to find out flow characteristics of globe valve. In this study numerical analysis for flow field in the globe valve is carried out using the FLUENT code which is commercial CFD program. Pressure drop through the globe valve is also measured to verify the results come from numerical analysis. Comparing experiment with numerical analysis, two results are very close to each other.

공기구동형 글로브밸브의 동적거동해석 (Dynamic Analysis of Air Operated Globe Valve)

  • 양상민;박종학;김동진;허태영;김봉호;신성기;김찬용
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1022-1025
    • /
    • 2003
  • Although the globe is the most typical valve to control high pressure drop in piping system, it is very hard to figure out the characteristics of flow field in the globe valve caused by its complex geometry. So there is very few studies to find out flow characteristics of globe valve. In this study, numerical analysis for flow field in the globe valve is carried out using the Fluent code which is commercial CFD program. Pressure drop through the globe valve is also measured to verify the results come from numerical analysis. Comparing experiment with numerical analysis, two results are very close to each other. Also finite element method is employed to evaluate the safety of globe valve using the results coming from the flow analysis to make the boundary conditions for FEM analysis. Maximum stress appears on the inlet channel of valve where inlet flow runs against. Because the maximum stress between 11.7 MPa to 3.6 MPa is within 3.4% of yield stress. the structural safety of valve is considered to be very sound

  • PDF

시민과학 활동에 참여한 초등학생들의 과학 관련 정의적 특성 및 측정에 대한 인식 분석 (A Study on Science-related Affective Characteristic and Perception of Measurement of Elementary Students Who Participated in Citizen Science Activities)

  • 신정윤;박상우
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제39권2호
    • /
    • pp.168-182
    • /
    • 2020
  • This study investigated how elementary students' science-related affective characteristics and their perception of measurement changed following participation in citizen science activities through a GLOBE program. Before and after the activities, test of positive experiences about science (PES) and perception of measurement were conducted with twelve fourth grade students. In addition, the teacher who participated in the GLOBE program with students observed and recorded the students' involvement, conversation and behavior to qualitatively analyze the value of the program and the students' perceptions of measurement. After the end of the program, an open questionnaire was conducted to fill any gaps in these observations. The results showed that citizen science activities had a positive impact on elementary students' science-related affective characteristics. In all areas of PES test, the post-test scores were higher than the pre-test results, and a statistically significant difference was seen in the 'science learning motivation' area. Furthermore, students' perception of the value and meaning of measurements was seen to deepen through ongoing global environmental data measurement activities. And their understanding of various units of measurement and numerous situations in which they might need to make measurements was also elaborated.

지진하중을 받는 원자력 내진등급 2A 글로브 밸브의 구조 건전성 평가 (Structural Integrity Evaluation of Nuclear Seismic Category IIA 2" Globe Valve for Seismic Loads)

  • 정철섭
    • 한국산학기술학회논문지
    • /
    • 제9권6호
    • /
    • pp.1500-1505
    • /
    • 2008
  • 본 논문은 원자력 내진등급 IIA 글로브 밸브의 지진하중에 대한 구조 건전성을 평가하였다. 밸브 구조물을 3차원 모델링하여 유한요소법을 사용하여 모달 해석 및 등가 정적 응력해석을 수행하였다. 모달 해석 결과 밸브 구조물은 충분히 강건하여 등가 정적해석이 가능하였고 해석에서 구한 응력들을 조합하여 원자력 규격집에서 제시한 허용응력과 비교하여 밸브의 구조 건전성을 판단하였다. 모든 지진하중에 대한 밸의 구조물에서의 응력은 허용값 보다 작게 분포하므로 구조적 건전성을 유지한다고 평가할 수 있다.

원자력 발전소용 벨로우즈 글로브 밸브에 대한 구조 건전성 평가 (The Evaluation of the Structural Integrity of Bellows Globe Valve for Nuclear Power)

  • 정철섭
    • 한국산학기술학회논문지
    • /
    • 제7권6호
    • /
    • pp.1034-1039
    • /
    • 2006
  • 본 논문은 내진등급 IIA 글로브 밸브의 지진하중에 대한 구조 건전성을 평가하였다. 밸브 구조물을 3차원 모델링하여 유한요소법을 사용하여 모달 해석 및 등가 정적 응력해석을 수행하였다. 모달 해석 결과 구조물은 충분히 강건하므로 지진 가속도 값을 사용한 등가 정적 응력해석이 가능하였다. 정적 응력 해석에서 구한 응력을 조합하여 원자력 규격집에 근거한 허용기준에 따라 밸브의 구조 건전성을 평가하였다. 지진하중에서 발생한 응력값이 허용값 아래에 분포하므로 글로브 밸브 구조물은 구조적 건전성을 유지할 수 있다고 평가할 수 있다.

  • PDF

ASME III 글로브밸브의 내진검증을 위한 진동대시험 (Shaking Table Test on ASME III Globe Valve with Actuator for Seismic Qualification Program)

  • 박형기
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
    • /
    • pp.139-146
    • /
    • 1998
  • The prototype ASME III motor actuated Y-type globe valve has been tested to identify dynamic characteristics. The valve is Seismic Category I equipment and has the function to control water flow in the safety-related system. In this study, two different types of structural identification test i.e. swept sine and broadband random, have been performed at various levels of excitation to verify the effects of test method and excitation level on cross coupling effect as well as natural frequencies and damping values. It was found that swept sine test and broadband random test showed similar natural frequencies, and that the primary interaction was exhibited between horizontal and vertical axes.

  • PDF

LED 경광등 글로브 렌즈 설계에 관한 연구 (A Study of Lens Design for LED Warning Light)

  • 신경호;임성무;여인선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1912-1914
    • /
    • 2004
  • As the characteristics of LED disposition, LED warning light must be designed differently from general incandescent lamp warning light whose light source is located in origin. In this paper, the globe's lens of LED warning light was designed considering the LED intensity distribution and the arrangement of the LED. And prove the appropriateness of that design by simulation in LightTools which is optical design program.

  • PDF

그래피칼 프로그램을 이용한 계측 및 제어 공학 실험실습 (Engineering Experiments and Practices on Measurement and Control using Graphical Program)

  • 갈리;최성주
    • 한국실천공학교육학회논문지
    • /
    • 제4권1호
    • /
    • pp.65-71
    • /
    • 2012
  • 이 연구에서는 LabVIEW와 NI ELVIS를 이용하여 컴퓨터 기반의 공학교육 사례 즉 다양한 컴퓨터 기반의 공학실습을 소개한다. 여러 유명대학이나 연구소, 회사 등에서 웹/인터넷 또는 네트웍으로 제어되는 원격 실험과 같은 형태의 원격 실습이 가능하다. 컴퓨터 및 그래피칼프로그래밍 기술의 공학실습교육 적용을 통하여 공학 실험실습의 흥미와 효과를 제고하였다.

  • PDF