• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.79-85
• /
• 2008

This study aims to derive a practical coordinate transformation method for the existing geographic information database. After analyzing the status and problems of existing 1/1,000 digital base map and GIS application database, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points in a study area. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. We also analyzed the transformation accuracy of underground infrastructure database using the same transformation method as the case of 1/1,000 digital base map. Through this study, it was found that the estimation of transformation coefficients by Molodensky-Badekas using urban control points was suitable for a local government. Furthermore, it was obvious that the accuracy of a 2-dimensional affine transformation was comparable to that of 7 parameter transformation for a local area. Applying the coordinate transformation and bias correction, we could transform GIS application database which was built by an offset surveying based on digital base map within the transformation accuracy of 10 cm. Therefore, it was judged that there will not be a big problem on the transformation of the GIS DB to the world geodetic system.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.249-254
• /
• 2017

Digital vector maps must be compressed effectively for transmission or storage in Web GIS (geographic information system) and mobile GIS applications. This paper presents a polyline compression method that consists of polyline feature-based hybrid simplification and second derivative-based data compression. Experimental results verify that our method has higher simplification and compression efficiency than conventional methods and produces good quality compressed maps.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.613-616
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs for the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.180-207
• /
• 2010

Technological innovations in the 21th Century greatly change the society. The radical advance in computer science brought changes and increased efficiency into society in general. The field of archaeology is also highly influenced and attempts to improve previous manually conducted field survey and research have been actively made. In order to supplement incomplete data set from archaeological excavation, the ways to use computer have been highly explored. GIS is one of them. However, use of GIS has been limited to document locations and to produce distribution map of features using digital map. There are no proper guides to employ GIS for academic research, so that it is hard for beginners to learn how to make use of GIS. In this paper, functions of GIS are introduced even for beginners, including definition of GIS and its archaeological use. It is also explained how to get DEM from digital map to do spatial pattern analysis. Various GIS special pattern analyses using DEM and 3D simulation are presented, as well.

• The Korean Journal of Ecology
• /
• v.19 no.5
• /
• pp.465-476
• /
• 1996

There are several environmental variables that may be influential to the spatial distribution of forest vegetation. To create a map of forest vegetation zone over southern part of Korean Peninsula, digital map layers were produced for each of environmental variables that include topography, geographic locations, and climate. In addition, an extensive set of field survey data was collected at relatively undisturbed forests and they were introduced into the GIS database with exact coordinates of survey sites. Preliminary statistical analysis on the survey data showed that the environmental variables were significantly different among the previously defined five forest vegetation zones. Classification of the six layers of digital map representing environmental variables was carried out by a supervised classifier using the training statistics from field survey data and by a clustering algorithm. Although the maps from two classifiers were somewhat different due to the classification procedure applied, they showed overall patterns of vertical and horizontal distribution of forest zones. considering the spatial contents of many ecological studies, GIS can be used as an important tool to manage and analyze spatial data. This study discusses more about the generation of digital map and the analysis procedure rather than the outcome map of forest vegetation zone.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.59-67
• /
• 2002

Recently, much demand of vector data have increased rapidly such as a digital map instead of traditional a paper map and the raster data such as a high-resolution orthoimage have been used for many GIS application with the advent of industrial high-resolution satellites and development of aerial optical sensor technologies. Aerial photogrammetric technologies using an airship can offer cost-effective and high-resolution color images as well as real time images, different from conventional remote sensing measurements. Also, it can acquire images easily and its processing procedure is short and simple relatively. On the other hand, it has often been used for the production of a small-scale land use map not required high accuracy, monitoring of linear infrastructure features through mosaicking strip images and construction of GIS data. Through this study, the developed aerial photogrammetric system using the airship expects to be applied to not only producing of scale 1:5, 000 digital map but also verifying, editing, and updating the digital map which was need to be reproduced. Further more, providing the various type of video-images, it expects to use many other GIS applications such as facilities management, scenery management and construction of GIS data for Urban area.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.238-242
• /
• 2007

Today's commercial high resolution satellite imagery such as that provided by IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Digital maps supply the most generally used GIS data probiding topography, road, and building information. Currently, the building information provided by digital maps is incompletely constructed for GIS applications due to planar position error and warped shape. We focus on extracting of the accurate building information including position, shape, and height to update the building information of the digital maps and GIS database. In this paper, we propose a new method of 3D building information extraction with a single high resolution satellite image and digital map. Co-registration between the QuickBird image and the 1:1,000 digital maps was carried out automatically using the RPC adjustment model and the building layer of the digital map was projected onto the image. The building roof boundaries were detected using the building layer from the digital map based on the satellite azimuth. The building shape could be modified using a snake algorithm. Then we measured the building height and traced the building bottom automatically using triangular vector structure (TVS) hypothesis. In order to evaluate the proposed method, we estimated accuracy of the extracted building information using LiDAR DSM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2006

The purpose of the paper is to make the three dimensional road simulation model based on the digital photogrammetry and GIS techniques in the middle of Halla mountain of Jeju island. To do this, we generate DEM (digital elevation model) and digital ortho image using GIS tools such as Arc View, Imagestation and MGE module. In GIS, the overlay map schemes combining of the hill shade, the land slope and aspect were applied. Based on the processes, we can build the best three dimensional road line along the hill side of the island. From the results, we also found that the derived DEM from digital ortho image and the GIS technique were very useful for choosing the best three dimensional road design before the real road construction works in Jeju island.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.204-211
• /
• 2007

In this study 3D topographic modeling was made by using aerial photography and digital terrain map, through this we did visibility analysis and implemented Web GIS of Dong-A university. Studying area was Busan Saha-gu Hadan-dong, we used aerial photography on a scale of 1:20,000 and digital terrain map on a scale of 1:5,000. Ortho correction image was made by aerial photography through selecting GCP, image matching, image resampling and precise differential rectification. And DEM on digital map was created using ArcView program, making 3D topographic modeling by road layer and building layer and implementing Web GIS about Dong-A university.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.143-148
• /
• 2008

This Study is about driving simulation after road design by 3D-GIS in digital elevation model from digital aerial photogrammetry. For designing roads efficiently it's very important to consider geographical features before design when analyze the view. Nevertheless, existing studies is mainly restricted in the mountainous, despite of using digital map or aerial photogrammetry and the study which used aerial photo in the area where the road designing is made really is not get executed. Therefore, this study will do 3D-road design and driving simulation by appling really road design data to topography, on the basis of digital elevation generated from aerial photogrammetry.