• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.363-368
• /
• 2003

We have successfully developed a more effective algorithm to extract the lineament in the area covered by wide alluvial deposits characterized by a relatively narrow range of brightness in the Landsat TM image, while the currently used algorithm is limited to the mountainous areas. In the new algorithm, flat areas mainly consisting of alluvial deposits were selected using the Local Enhancement from the Digital Elevation Model (DEM). The aspect values were obtained by 3${\times}$3 moving windowing of Zevenbergen & Thorno's Method, and then the slopes of the study area were determined using the aspect values. After the lineament factors in the alluvial deposits were revealed by comparing the threshold values, the first rank lineament under the alluvial deposits were extracted using the Hough transform In order to extract the final lineament, the lowest points under the alluvial deposits in a given topographic section perpendicular to the first rank lineament were determined through the spline interpolation, and then the final lineament were chosen through Hough transform using the lowest points. The algorithm developed in this study enables us to observe a clearer lineament in the areas covered by much larger alluvial deposits compared with the results extracted using the conventional existing algorithm. There exists, however, some differences between the first rank lineament, obtained using the aspect and the slope, and the final lineament. This study shows that the new algorithm more effectively extracts the lineament in the area covered with wide alluvlal deposits than in the areas of converging slope, areas with narrow alluvial deposits or valleys.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.273-282
• /
• 1999

For appling the GSIS on a air environment division, first of all, spatial-distribution of environmental factor which has distinction of continuous surface such as air-pollutant and a factor of weather must be able to be drawn. So we should estimate a distribution of whole area with point observation value which is observed on several restricted point. On this study, we investigate and study the application of GSIS technique which can be visible emission characteristic by regions, items, and time using data such as traffic quantity data, digital map for GIS-T and emission factor of each pollutant of vehicles about whole area of Seoul surveyed by traffic sensus of Seoul to air environment division.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.49-55
• /
• 2006

Nowadays, flood hazard maps have been generated to minimize the damages from the flooding. To generate such flood hazard maps, LiDAR data can be used as data source with higher data accuracy. LiDAR data, however, requires relatively higher cost and longer processing time. In this background, this study proposed DEM generation using NGIS digital topographic maps. For that, breaklines were processed to count directions of water flows. In addition, the river profile data, unique data source to represent real topography of the river area, were integrated to the breaklines to generate DEM. City of Kuri in Kyunggi Province was selected for this study and 1:1,000 and 1:5,000 topographic maps were integrated to process breaklines and river profile data were also linked to generate DEM. The generated DEM showed relatively lower vertical accuracy from mixing 1:1,000 and 1:5,000 topographic maps since 1:1,000 topographic maps were not available for some portion of the area. However, the DEM generated demonstrated reasonable accuracy and resolution for flood map generation as well as higher cost saving effects. On the contrary, for more efficient utilization of NGIS topographic maps, periodic map updating needs to be made including technical consideration in building breaklines and applying interpolation methods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.28-38
• /
• 2004

The purpose of this study is to analyze the urban hydrologic state by the use of GIS, resolution and interpolation. The determination coefficient($R^2$) and Regression Formula were derived from the contour of digital map for the accuracy, and DEM data was made by using TIN interpolation by the size of the grid. By using the observed DEM data, topographical factors were extracted from the small basin, size, the width of a basin and the slope, and were applied in the urban runoff model. Through the model, we tried to find out the most suitable runoff model in a small basin of Yosu-Munsu area. As a result of applying models to the drainage considered, the runoff hydrograph estimated by SWMM model was closer to the observed one than that estimated by ILLUDAS model. The difference between the runoff hydrograph by SWMM and the observed one is maximum error of 19%, minimum error of 5% and average error of 13%. The influence of duration in contrast to pick time is insignificant in a urban small basin. As a conclusion of this study, SWMM model was more suitable and applicable for the urban runoff model than ILLUDAS model due to its accuracy and various abilities.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1643-1652
• /
• 2020

To investigate the characteristics of detailed flows in a building-congested district, we coupled a computation fluid dynamics (CFD) model to the local data assimilation and prediction system (LDAPS), a current operational numerical weather prediction model of the Korea Meteorological Administration. For realistic numerical simulations, we used the meteorological variables such as wind speeds and directions and potential temperatures predicted by LDAPS as the initial and boundary conditions of the CFD model. We trilinearly interpolated the horizontal wind components of LDAPS to provide the initial and boudnary wind velocities to the CFD model. The trilinearly interpolated potential temperatures of LDAPS is converted to temperatures at each grid point of the CFD model. We linearly interpolated the horizontal wind components of LDAPS to provide the initial and boundary wind velocities to the CFD model. The linearly interpolated potential temperatures of LDAPS are converted to temperatures at each grid point of the CFD model. We validated the simulated wind speeds and directions against those measured at the PKNU-SONIC station. The LDAPS-CFD model reproduced similar wind directions and wind speeds measured at the PKNU-SONIC station. At 07 LST on 22 June 2020, the inflow was east-north-easterly. Flow distortion by buildings resulted in the east-south-easterly at the PKNU-SONIC station, which was the similar wind direction to the measured one. At 19 LST when the inflow was southeasterly, the LDAPS-CFD model simulated southeasterly (similar to the measured wind direction) at the PKNU-SONIC station.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2009

Rapid visualization of flood area of downstream according to the dam effluent in flood season is very important in dam management works. Overlay zone of river bight should be removed to represent flood area efficiently based on flood stage which was modeled in river channels. This study applied drainage enforcement algorithm to visualize flood area considering river bight by coupling Coordinate Operation System for Flood control In Multi-reservoir (COSFIM) and Flood Wave routing model (FLDWAV). The drainage enforcement algorithm is a kind of interpolation which gives to advantage into hydrological process studies by removing spurious sinks of terrain in automatic drainage algorithm. This study presented mapping technique of flood area layer considering river bight in Namgang-Dam downstream, and developed system based on Arcobject component to execute this process automatically. Automatic extraction system of flood area layer could save time-consuming efficiently in flood inundation visualization work which was propelled based on large volume data. Also, flood area layer by coupling with IKONOS satellite image presented real information in flood disaster works.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.47-52
• /
• 2011

Recently damage scale by local winds and typhoon has dramatically increased. Korea has the terrain over 70% of the land and the planning of the wind load is necessary to estimate reflecting appropriately the change of the wind-speed according to the characteristic of the terrain and in the Korean Building Code(2009), this is stated and it reflects to the design process. However, in order to estimate the topographic factor of the wind speed considering the topographic characteristics in the structure design actually, it has many difficult points including the local topographic survey, etc. In this paper, the Digital Elevation Model(DEM) is created using TIN interpolation method in the form of the digital map and then the interface was designed and implemented which can automatically estimate the topographic factor of wind speed by using ESRI(R)ArcObjectTM and the Visual Basic programing language. By applying it to the terrain which positioned in the downtown area, the practicality of the topographic factor of wind speed estimation interface was checked.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.486-490
• /
• 2017

도심지에서의 침수피해는 이상홍수 및 국지성 호우 시 우수관거 시설기준 미달, 펌프장 등 배수시설이 설치되지 않아 하천의 계획홍수위보다 제내지의 지반고가 낮은 저지대 지역에서 많이 발생하고 있다. 특히, 내수침수의 경우는 외수에 따른 범람보다는 국민의 재산과 인명피해에 직접적인 영향을 미치므로 침수피해 위험도가 높은 지역의 주민에게 그 지역의 침수빈도와 범위를 인지시키고 사전대응 능력을 향상시킬 필요가 있다. 따라서 연구의 목적으로 매년 피해가 발생한 이력이 있는 위험지구에 대해 전국단위 시군구별 침수피해 지도를 작성하여 침수심 산정과 피해액 예측할 수 있는 기초자료로 활용하고, 주민들의 신속한 대처를 통해 그들의 생명과 재산을 보호하여 재난 안전 국가 이미지 제고에 기여하고자 한다. 본 연구에서는 도심지 유출모형인 XP-SWMM을 활용하여 내수재해 위험요인에 대한 전국을 해석하는 것에 한계가 있어 풍수해저감종합계획에 수록된 XP-SWMM모의 분석 결과 값을 활용하고자 하였다. 기 수립된 전국 풍수해저감종합계획의 과거 피해 자료를 바탕으로 이상 집중호우나 태풍의 내습 시 풍수해 피해 발생 가능성이 제일 높은 지역을 연구범위 대상지역으로 선정하였다. 그 중 풍수해의 주요 원인으로서 태풍, 집중호우 및 해일로 인한 피해발생 빈도가 높은 지역이면서 하천재해 및 내수침수 피해가 많은 경기도 동두천시를 연구대상 지역으로 선정하였으며, 대상지 유역 현황과 지형정보 및 빈도별 침수심을 조사하였다. 수록된 내용에 따르면 경기도 동두천시는 우수관망의 밀도가 높은 4개 위험지구를 내수재해 발생가능성 지역으로 선정하여 10년, 20년, 30년, 50년, 100년, 200년 6개 빈도에 대해 XP-SWMM 모의를 실시하였다. 이와 같이 수록된 각 빈도에 대한 모의 결과 값을 GIS기술을 이용하여 디지털화 하고 부가적인 분석을 위한 GIS데이터화 하는 내삽법을 선정하여 침수면적 및 침수심을 산출하였다. 그러나 면적비교를 통해 모의 결과 값을 디지털화 하는 과정에서 많은 오차가 발생되는 것을 확인하였고, 이를 보완하기 위해 좌표보정 자동화 프로그램을 개발하여 이러한 문제점을 제거하여 신뢰도를 향상시켰다. 이렇게 계산된 연구 대상지역의 침수심과 침수면적을 활용하여 지도제작 표준 지침서 및 가이드라인을 제시하여 한국형 호우피해 지도제작 기술개발에 기여하고, 비구조적 대책으로서 이상홍수에 대한 위험도를 파악하여 지역별 도심침수 방지를 위한 대비체계를 구축하는 등 위험지역에 대한 사전분석 및 활용에 기초자료로 도움이 되고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.407-415
• /
• 2008

This study presents the methodology to link with aerial photos for advancing the accuracy of topographic survey data that is used to calculate water volume in urban stream. First, GIS spatial interpolation technique as Inverse Distance Weight (IDW) and Kriging was applied to construct the terrain morphology to the sand-bar and grass area using cross-sectional survey data, and also validation point data was used to estimate the accuracy of created topographic data. As the result of comparison, IDW ($d^{-2}_{ij}$, 2nd square number) in Sand-bar area and Kriging Spherical model in grass area showed more efficient results in the construction of topographic data of river boundary. But the differences among interpolation methods are very slight. Image classification method, Minimum Distance Method (MDM) was applied to extract sand-bar and grass area that are located to river boundary efficiently and the elevation value of extracted layers was allocated to the water level point value. Water volume with topographic data from aerial photos shows the advanced accuracy of 13% (in sand-bar) and 12% (in grass) compared to the water volume of original terrain data. Therefore, terrain analysis method in river linking with aerial photos is efficient to the monitoring about sand-bar and grass area that are located in the downstream of Dam in flooding season, and also it can be applied to calculate water volume efficiently.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2014

In this study spatial analysis of PM10 was performed to Particulate Materials(PM) less than $10{\mu}m$ in diameter in Seoul city. Because PM10 are responsible for the increasing mortality rate of lung cancer and cardiovascular diseases, spatial distribution of PM10 are special interest in air pollution of Seoul. In this study, spatial analysis of Particulate Materials were monitored by monthly averaged PM10 concentration of 2010, 2011. The monthly spatial patterns of PM10 showed the west area of Seoul(Youngdungpo) higher PM10 concentration than northern part of Seoul in early spring and winter seasons. In the comparison of PM10 concentration distribution patterns in 2010 and 2011, the PM10 concentration of 2011 at Gangnam and Songpa-gu were more increased than yearly averaged patterns of 2010. The distribution patterns of PM10 in Seoul city showed the high concentration PM10 of several areas with Youngdungpo-gu, Gangnam-gu and Cheongnyangni. Therefore we need to establish PM10 management strategy for these area.