• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1881-1888
• /
• 2014

Greenhouse gas (GHG) emissions from dye wastewater treatment processes were estimated by analysing their mass and energy balances, which were then used as baseline information for environmental assessment. The total GHG emissions from dye wastewater treatment plants were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The amounts of $CO_2$, $CH_4$ and $N_2O$ emissions were calculated according to the Intergovernmental Panel on Clime Change (IPCC) guideline for the GHG target management system. For 3 years between 2011 and 2013, direct and indirect emissions were on average 8,742.7 and 7,892.0 Ton.$CO_2eq/year$, respectively, with the former exhibiting 52.6 %. Also, compared to 2012, in 2013, the eco-efficiency indicator by the GHG emissions was found to be more than 1, suggesting that environmental quality was effectively improved.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.349-358
• /
• 2013

In this study, the newest technology available to reduce GHG emissions, which can be applicable in energy industries of the future that has large reduction obligations by energy target management and large intensity of GHG emissions, has been investigated by searching the technical characteristics of each technology. The newest technology to reduce GHG emissions in the field of power generation and energy can be mainly classified into the improvement of efficiency, CCS, and gas combined-cycle technology. In order to improve the reliability of the GHG emission factor obtained from the investigation process, it has been compared to the technology-specific GHG emission factor derived from the estimated amount of emissions. Then the GHG abatement measures, using the derived estimation of factor, by using the newest technology to reduce GHG emissions have been predicted. As a result, the GHG reduction rate by technology of CCS development has been expected to be the largest more than 30%, and the abatement rate by technology of coal gasified fuel cell and pressurized fluidized-bed thermal power generation has been showed more than 20%. If the effective introduction of the newest technology and the study of its characteristics is continued, and properly applied for future GHG emissions, it can be prospected that the national GHG reduction targets can be achieved in cost-efficient way.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.951-962
• /
• 2020

One hundred ninety-five countries reached agreement on a new climate treaty in Paris, France to reduce the carbon emissions. South Korea has been selected as a target country for reducing greenhouse gas (GHG) obligations since 2020. In this context, the Korean government developed several GHG emissions reduction programs using forests called the "Forest carbon offset scheme (FCOS)." The forest management method is one of the tools to implement FCOS. Most of the participants registered forest management as the preferred methodology to participate in the FCOS. For a successful implementation of the FCOS, it is necessary to explore the optimal methods by considering the cost-effective aspect of conducting the forest management as a tool to increase carbon absorption. In this context, this study investigated the value optimized FCOS projects based on the forest management methodology in South Korea. Three forest management scenarios, 1) extending the final age of maturity of Pinus densiflora stands (S1), 2) extending the final age of maturity of Quercus acutissima stands (S2), and 3) reforestation with new species (Pinus densiflora to Quercus acutissima) (S3), were examined and evaluated to identify the optimal carbon absorption and value optimized economic perspective. The results of the scenario-based modelling indicated that S3 showed value optimized from an economical perspective, and S2 was the most effective method to absorb carbon among the scenarios. It is anticipated that this paper will contribute to provide valuable information by presenting innovative approaches as a value optimized FCOS implementing tool in a GHG reduction program in South Korea.

• Clean Technology
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2014

The potential mitigation of greenhouse gas (GHG) is studied in the Pohang steel industrial complex (PHSIC). The total GHG emission in 2010 is estimated to be in the range from 4,174,000 to 4,574,000 $tCO_2-eq$ in PHSIC. To meet the target proposed by the government, it is needed to reduce 552,000 $tCO_2-eq$ at minium by 2020. To estimate the potential amount of GHG reduction, the technologies used in the voluntary carbon reduction projects are applied to 51 companies which are subject to GHG target management. From the viewpoint of technological availability and payback period, the fuel conversion and waste heat recovery have an advantage in the short term with a possibility to reduce 160,000 $tCO_2-eq$. In the mid term, the thermal technologies in steel and iron industry have the potential to cut 229,000 $tCO_2-eq$, while the electrical technologies have the potential of 125,000 $tCO_2-eq$ reduction. The gap between the target GHG mitigation and potential reduction using the short and mid term technologies is about 38,000 $tCO_2-eq$, which should be compensated by the fundamental process innovation and the implementation of the most cutting-edge technologies including renewable energy.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.1
• /
• pp.47-54
• /
• 2016

Global aviation is projected to grow in demand by an annual average of 4.1% between 2014 and 2034. It can be said that environmental impact from aviation will therefore be expected to increase on a similar scale. As regards civil aviation emissions, the sector contributes between 2~3% to International aviation GHG emissions. In the European Union(EU), aviation emissions account for about 3% of the EU's total green house gas emissions, of which a majority are said to come from international flights. In terms of traffic volume in 2013, Korea's international aviation industry 11th with regard to passengers and 3rd with regard to cargo, attaining the overall rank of 5th in the world. GHG emissions has been increasing steadily over the last 4 years, averaging 3.9 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. As for aviation in Korea, there are a number of means intended to attain the Government's emission control objective in an efficient manner, such as AVA (Agreement of Voluntary Activity), TMS (Target Management System) and ETS (Emission Trading Scheme). In addition, the Government intends to better adapt to ICAO's Global MBM(Market-based Measures) that will come into performance on Year 2020. In the study, we focused on GHG mitigation measures that is fulfilling the AVA, TMS, ETS in the Government and suggest the effective measures to reduction the aviation GHG emissions.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2012

The Government of South Korea has continued its effort to fixate virtuous circle of economic growth and climate change response to cope with international demands and pressure to commitment for greenhouse gas reduction effectively. Nationally, Korean Government has established "Enforcement of the Framework Act on Low carbon, Green Growth"(2010. 4. 13) to implement national mid-term GHG mitigation goal(30% reduction by 2020 compare to BAU), which established the foundation for phased GHG mitigation by setting up the sectoral and industrial goal, adopting GHG and Energy Target Management System. Also, follow-up measures are taken such as planning and control of mid-term and short-term mitigation target by detailed analysis of potential mitigation of sector and industry, building up the infrastructure for periodic and systematic analysis of target management. Likewise, it is required to establish more accurate, reliable and detailed sectoral GHG inventory for successfully establishment and implement the frame act. In comparison to the $CO_2$ emission, Especially fluorinated greenhouse gases (HFCs, PFCs, $SF_6$) are lacking research to build the greenhouse gas inventories to identify emissions sources and collection of the applicable collection activities data. In this study, with the refrigeration and air conditioning sector being used to fluorine refrigerant(HFCs) as the center, greenhouse gas emission estimation methodology for evaluating the feasibility of using this methodology look over and mobile air conditioning, fixed air conditioning, household refrigeration equipment, commercial refrigeration equipment for the greenhouse gas emissions were calculated. First look at in terms of methodology, refrigeration and air conditioning sector GHG emissions in developing country-specific emission factors and activity data of the industrial sector the construction of the DB is not enough, it's 2006 IPCC Guidelines Tier 2a (emission factor approach) rather than the Tier 2b (mass balance approach) deems appropriate, and each detail by process, sectoral activity data more accurate, if DB is built Tier 2a (emission factor approach) can be applied will also be judged. Refrigeration and air conditioning sector in 2009 due to the use of refrigerant greenhouse gas emissions ($CO_2eq.$) assessment results, portable air conditioner 1,974,646 ton to year, fixed-mount air conditioner 1,011,754 ton to year, household refrigeration unit 4,396 ton to year, commercial refrigeration equipment 1,263 ton to year was estimated to total 2,992,037 tons.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.221-230
• /
• 2017

There are two main policies to meet the national goal of reducing Greenhouse Gases (GHGs) emissions in Korea towards Paris Agreement. From 2012 to 2014, Target Management System (TMS) was operated and the Emissions Trading Scheme (ETS) has been established since 2015. To compare the impact of TMS and ETS on reducing GHGs, we collected annual GHGs emission reports submitted by individual business entities, and normalized them using a z-variant normalized function. In order to evaluate the impact of those policies, we calculated the amount of GHGs emissions of 73 business entities from 15 business sectors. Those entities emitted $508million\;CO_2eq$, which is 74% of total national GHGs emissions in 2014. The main results of analysis indicate that accumulated GHGs emissions during the period 2012 to 2014 affected by TMS was higher than the national goal of GHGs emission reduction, and only the GHGs emissions in 2014 were in the range of allowed GHGs emissions, set by the Government. In 2015, when ETS initiated, total GHGs emission trading was $4.84million\;tCO_2eq$, which is only 0.9% of total allowance in 2015. However, more than 50% of business entities, who got the allowance of GHGs emission given by the Government, met the goal of GHGs emissions. Particularly, 27 of 73 business entities reduced GHGs more under the ETS rather than the TMS. Even though we analyzed only 4 years' data to demonstrate the impact of TMS and ETS, it is expected to commit the national goal of GHGs reduction target by TMS and ETS.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2961-2964
• /
• 2011

Greenhouse gas and energy reduction goal management system is announced to reduce national CO2 emission in 2011. The target business sector of the system has to follow the procedure of the system and get the assessment. The percentage of the national CO2 reduction goad is 30 % compared to the amounts of BAU. In railway business sector, 6 bodies are included in this system so that railway industry cannot stay and sustain its better position any more than other transportation industry. Most of the industry except Railway industry is struggling to develop its product more environmentally friendly and get the 3rd party certification like Eco-labelling and Carbon footprint. To get environmental certification, LCA method has to be applied because life cycle approach is needed to respond current environmental requirement. The purpose of this project is to facilitate railway vehicle manufacturer obtaining the environmental certification termed Korea EPD. By doing so, the environmental performance evaluation tool would be developed and modelled within the LCA framework and therefore applied especially for rail vehicle.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.231-248
• /
• 2014

The goal of this research is to develop an evaluation method applying 'Green Management Index' introduced by Korean government to assess overall Green management level of the industrial sector. The method can help to grasp the present condition of Green management in Korea and analyze changes in trend. For this research, business types are classified into 8 categories and each evaluation method is developed according to each category. Green management evaluation was conducted in 2013, targeting 513 enterprises and the result was analyzed comparing that of 2011 to understand changes in trend. The evaluation shows that 1) 'strategy and system' section is tentatively vulnerable than other sections, 2) industry with higher sensitivity towards regulations has higher score, 3) there is a significant gap conducting green management between conglomerates and SMEs especially in 'system' section. The total score was elevated by 3 points compared to 2011. It is considered that the elevation of score was attributed to tightened regulations such as Target Management Scheme. Controlled Entities scored 4 points higher and 'GHG and environmental pollution' section increased by 10 points. Also, there is a wide disparity in green management evaluation between controlled entities and non-controlled entities from 5 points in 2011 to 10 points in 2013.