• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.209-220
• /
• 2004

If protocol has fast operations and short key length, it can be efficient user authentication protocol. Lenstra and Verheul proposed XTR. XTR have short key length and fast computing speed. Therefore, this can be used usefully in complex arithmetic. In this paper, to design efficient user authentication protocol we used a subgroup of Galois Field to problem domain. Proposed protocol does not use GF(p/sup 6/) that is existent finite field, and uses GF(p²) that is subgroup and solves problem. XTR-ElGamal based user authentication protocol reduced bit number that is required when exchange key by doing with upside. Also, proposed protocol provided easy calculation and execution by reducing required overhead when calculate. In this paper, we designed authentication protocol with y/sub i/ = g/sup b.p/sup 2(i-1)//ㆍv mol q, 1(equation omitted) 3 that is required to do user authentication.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.85-90
• /
• 2003

This paper proposes a modular multiplier based on LFSR (Linear Feedback Shift Register) architecture with efficient area complexity over GF(2/sup m/). At first, we examine the modular exponentiation algorithm and propose it's architecture, which is basic module for public-key cryptosystems. Furthermore, this paper proposes on efficient modular multiplier as a basic architecture for the modular exponentiation. The multiplier uses AOP (All One Polynomial) as an irreducible polynomial, which has the properties of all coefficients with '1 ' and has a more efficient hardware complexity compared to existing architectures.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.130-137
• /
• 1996

본 연구는 정적 및 동적하중 재하상태에서 배합조건을 달리한 콘크리트의 파괴특성을 조사하고자 3점 휨 실험을 실시하였다. 실험은 물-시멘트비를 일정하게 유지한 상태에서 슬럼프 값을 변화시키는 경우와 슬럼프 값을 일정하게 유지하면서 물-시멘트비를 변화시키는 경우로 구분하여 배합비를 달리한 6가지 배합형태의 무근콘크리트 시편 54개를 제작하였다. 실험결과에 의하여 콘크리트의 파괴에너지(Gf)와 특성길이(lch)를 구한 수 이를 강도특성(f'c, fsp , Ec, ff)과의 상관관계를 규명하고 파괴에너지(Gf)를 이용한 배합설계의 타당성을 검토하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.185-190
• /
• 2000

The effect of specimen thickness and notch's depth and the validity of J-integral analysis were studied on the fracture behavior of concrete. Through the 3-point bending test, the stress-deformation curves were experimentally measured. Concrete fracture toughness is calculated from stress-displacement curves. Concrete fracture toughness decreases when notch's depth is longer. So, Gf is less sensitive than JIc and Gf is more useful factor as concrete fracture toughness parameter. The values of J-integral and fracture energy increase when the breadth of concrete specimen get longer from 75mm to 150mm. Therefore, the breadth effect of specimen has to be considered in determining the concrete fracture toughness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.418-424
• /
• 1994

Like the Hermitian function field over GF(q), those subfields defined by y +y=x where s divides q+1 are also maximal, having the maximum number os places of degree one permissible by the Hasse-Weil bound. Geometric Goppa codes(or algebraic geometric codes) arising from these subfields of the Hermitian function field are studied in this paper. Their dimension and minimum distance are explicilty and completely presented for any m with m

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.300-304
• /
• 2003

수용성 안료인 RhB를 대상으로 GF/C에 고정한 $TiO_2$와 유동층 반응기를 이용하여 제거실험을 수행한 결과 다음과 같은 결론을 얻었다. 1. 고정화 $TiO_2$의 경우도 분말을 이용한 것과 같이 최적 광촉매 투입량이 나타났으며, 최적 투입량은 40.0 g/L이었고, 분말 $TiO_2$를 이용하는 광촉매 반응의 초기속도식과 같이 Langmuir - Hinshelwood 식으로 표현될 수 있었다. 분말 $TiO_2$를 이용한 경우보다 초기반응속도는 2.3배 느렸으나, 고정화 $TiO_2$의 경우 연속공정이 가능하고 촉매회수 공정이 필요하지 않으므로 반응속도만 더 높일 수 있으면 현장적용 가능성이 높다고 사료되었다. 2. 고정화 $TiO_2$의 최소유동을 위한 공기 공급량은 4 L/min, 최대 반응속도는 5 L/min에서 나타나 고정화 $TiO_2$를 충진한 유동층 반응기의 최적 공기 공급량은 최소유동화 속도 부근인 것으로 사료되었다.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.31-37
• /
• 2007

There are many investigations about the security on RFID system to protect privacy. It is important to mutual authentication of the security on RFID system. The protocol for mutual authentication use light-weight operation such as XOR operation, hash function and re-encryption. However, the protocol for authentication and privacy is required more complicated cryptography system. In this paper, we propose a mutual authentication protocol using finite field GF($2^n$) for a authentication and are a safety analysis about various attacks.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.26-32
• /
• 2012

Recently, concrete using multicomponent blended cement has been required to increase the freeze-thaw and sulfate resistances of concrete structures exposed to a marine environment. Thus, the purpose of this study was to propose the use of concrete containing multicomponent blended cement as one of the alternatives for concrete structures exposed to a marine environment. For this purpose, batches of concrete containing ordinary portland cement (OPC), binary blended cement (OPC-G, G: ground granulated blast slag), ternary blended cement (OPC-GF, F: fly ash), and quaternary blended cement (OPC-GFM, M: mata-kaolin) were made using a water-binder ratio of 50%. Then, the durability levels, including thesulfate and freeze-thaw resistances, were estimated for concrete samples containing OPC, OPC-G, OPC-GF, and OPC-GFM. It was observed from the tests that the durability levels of the concrete samples containing OPC-G and OPC-GF were found to be much better than that of the concrete containing OPC. The optimum mixing proportions were a40% replacement ratio of ground granulated blast slag for the binary blended cement and a30% replacement ratio of ground granulated blast slag and 10% fly ash for the ternary blended cement.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.659-665
• /
• 2012

IgY (Immunoglobulin Yolk) in egg yolk corresponds to IgG (Immunoglobulin G) in animal serum and plays an important role as immunological proteins in intestines. Carrageenan and Arabic gum were used as pretreatment agents to purify IgY from fresh egg yolk. DEAE (Diethylaminoethyl) Sepharose column in FPLC (Fast Protein Liquid chromatography) was an ion exchange tool to remove contaminants as well as to elute IgY from the column. GF HPLC (Gel Filtration High Performance Liquid Chromatography) enables to measure the molecular weights of IgY and to identify the purified IgY by comparing the molecular weight of standard IgY with the purified one. IgY is a heterogeneous group of different molecular weight and ionic properties, which was investigated with various IE HPLC (Ion Exchange High Performance Liquid Chromatography) columns such as AX, CX and SCX. Three peaks of IgY were separated in the AX column under the conditions of 0.5 M NaCl and pH=8. The SCX column also gave the three peaks of IgY at 0.5 M NaCl and pH=5.

• International Journal of Fluid Machinery and Systems
• /
• v.5 no.2
• /
• pp.65-71
• /
• 2012

The objective of the present investigation is to explore the possibility of improving the performance of a centrifugal fan at low Reynolds numbers using a simple passive means, namely Gurney flap (GF). GFs of 1/$8^{th}$ inch brass angle (3.175 mm) corresponding to 15.9% of blade exit height or 5.1% of blade spacing at the impeller tip are attached to the impeller blade tip on the pressure surface. Performance tests are carried out on the centrifugal fan with vaneless diffuser at five Reynolds numbers (viz., 0.30, 0.41, 0.55, 0.69, $0.82{\times}10^5$, i.e., at five speeds respectively at 1,100, 1,500, 2,000, 2,500 and 3,000 rpm) without and with GF. Static pressures on the vaneless diffuser hub and shroud are also measured for each speed at four flow coefficients [${\phi}$=0.23 (below design flow coefficient), ${\phi}$=0.34 (design flow coefficient), ${\phi}$=0.45 (above design flow coefficient) and ${\phi}$=0.60 (above design flow coefficient)] with and without GF. From the performance curves it is found that the performance of the fan improves considerably with GFs at lower Reynolds numbers and improves marginally at higher Reynolds number. Similar improvements are observed for the static pressures on the diffuser hub and shroud. The effect of Reynolds number on the performance and static pressures is considerable. However the effect is reduced with GFs.