• Title/Summary/Keyword: GF-3

Search Result 412, Processing Time 0.032 seconds

A Study on the Parallel Multiplier over $GF(3^m)$ Using AOTP (AOTP를 적용한 $GF(3^m)$ 상의 병렬승산기 설계에 관한 연구)

  • Han, Sung-Il;Hwang, Jong-Hak
    • Journal of IKEEE
    • /
    • v.8 no.2 s.15
    • /
    • pp.172-180
    • /
    • 2004
  • In this paper, a parallel Input/Output modulo multiplier, which is applied to AOTP(All One or Two Polynomials) multiplicative algorithm over $GF(3^m)$, has been proposed using neuron-MOS Down-literal circuit on voltage mode. The three-valued input of the proposed multiplier is modulated by using neuron-MOS Down-literal circuit and the multiplication and Addition gates are implemented by the selecting of the three-valued input signals transformed by the module. The proposed circuits are simulated with the electrical parameter of a standard $0.35{\mu}m$CMOS N-well doubly-poly four-metal technology and a single +3V supply voltage. In the simulation result, the multiplier shows 4 uW power consumption and 3 MHzsampling rate and maintains output voltage level in ${\pm}0.1V$.

  • PDF

Efficient Parallel Block-layered Nonbinary Quasi-cyclic Low-density Parity-check Decoding on a GPU

  • Thi, Huyen Pham;Lee, Hanho
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.6 no.3
    • /
    • pp.210-219
    • /
    • 2017
  • This paper proposes a modified min-max algorithm (MMMA) for nonbinary quasi-cyclic low-density parity-check (NB-QC-LDPC) codes and an efficient parallel block-layered decoder architecture corresponding to the algorithm on a graphics processing unit (GPU) platform. The algorithm removes multiplications over the Galois field (GF) in the merger step to reduce decoding latency without any performance loss. The decoding implementation on a GPU for NB-QC-LDPC codes achieves improvements in both flexibility and scalability. To perform the decoding on the GPU, data and memory structures suitable for parallel computing are designed. The implementation results for NB-QC-LDPC codes over GF(32) and GF(64) demonstrate that the parallel block-layered decoding on a GPU accelerates the decoding process to provide a faster decoding runtime, and obtains a higher coding gain under a low $10^{-10}$ bit error rate and low $10^{-7}$ frame error rate, compared to existing methods.

Photocatalytic Decolorization of Rhodamine B using Immobilized TiO2 onto GF/C and Fluidized Bed Reactor (GF/C에 고정된 TiO2와 유동층 반응기를 이용한 Rhodamine B의 광촉매 탈색)

  • 박영식;안갑환
    • Journal of Environmental Science International
    • /
    • v.12 no.12
    • /
    • pp.1277-1284
    • /
    • 2003
  • The photocatalytic oxidation of Rhodamine B (RhB) was studied using immobilized TiO$_2$ and fluidized bed reactor. Immobilized TiO$_2$ onto GF/C was employed as the photocatalyst and a 30 W germicidal lamp was used as the light source and the reactor volume was 4.8 L. The effects of parameters such as the amounts of photocatalyst, initial concentration, initial pH, air flow rate and anion additives (NO$_3$$\^$-/, SO$_4$$\^$2-/, Cl$\^$-/, CO$_3$$\^$2-/) competing for reaction. The results showed that the optimum dosage of the immobilized TiO$_2$ was 40.0 g/L. Initial removal rate of immobilized TiO$_2$ was expressed Langmuir - Hinshelwood equation.

Characteristics of Wear on Sliding Speed of Glass Fiber Reinforcement Composites (유리섬유강화 복합재료의 미끄럼 속도변화에 따른 마모 특성)

  • Kim, Hyung Jin;Koh, Sung Wi
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.48 no.3
    • /
    • pp.277-283
    • /
    • 2012
  • The characteristics of abrasive wear on sliding speed of glass fiber reinforcement (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and surface roughness of these materials on sliding speed were determined experimentally. The major failure mechanisms were lapping layers, deformation of resin, ploughing, delamination, and cracking by scanning electric microscopy (SEM) photograph of the tested surface. As increasing the sliding speed the GF/PUR composites indicated higher friction coefficient. The surface roughness of the GF/PUR composites was increased as the sliding speed was higher in wear test.

Purification and Characterization of Cycloinulooligosaccharide Fructanotransferase from Bacillus macerans CFC1

  • Kim, Hwa-Young;Choi, Yong-Jin
    • Journal of Microbiology and Biotechnology
    • /
    • v.8 no.3
    • /
    • pp.251-257
    • /
    • 1998
  • Cycloinulooligosaccharide fructanotransferase (CFTase) which produces cyclofructan from inulin was purified 332-fold from a culture broth of Bacillus macerans CFCl. The molecular mass of the CFTase was estimated to be 110 kDa by SDS-polyacrylamide gel electrophoresis and gel filtration, indicating that the enzyme has a monomer structure. The maximal level of enzyme activity was observed at pH 7.5 and $45^{\circ}C$. The enzyme was stable in the pH range 6.0 to 9.5, and at temperatures up to $45^{\circ}C$ for 1 h. The enzyme activity was completely inhibited in the presence of 0.5 mM $Ag^+\;or\;Cu^2+$ ion. None of sucrose (GF), l-kestose (GF2), or nystose (GF3) were found to be substrates for the CFTase, but inulooligosaccharides larger than nystose were attacked by the enzyme. The CFTase catalyzes not only the cyclization as the major reaction, but also disproportionation and coupling reactions involving intermolecular transfructosylation in the same manner as cyclodextrin glucanotransferase (CGTase) (EC 2.4.1.19).

  • PDF

Syntheses and realization of Quaternary Galois Field Sum-Of-Product(QGFSOP) expressed 1-variable functions Permutational Literals (치환리터럴에 의한 Quaternary Galois Field Sum-Of-Product(QGFSOP)형 1-변수 함수의 합성과 실현)

  • Park, Dong-Young;Kim, Baek-Ki;Seong, Hyeun-Kyeong
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.5
    • /
    • pp.710-717
    • /
    • 2010
  • Even though there are 256 possible 1-qudit(1-variable quantum digit) functions in quaternary logic, the most useful functions are 4!=24 ones capable of representing in QGFSOP expressions by possible permuting of 0,1,2, and 3. In this paper, we propose a permutational literal(PL) representation and a QPL(Quaternary PL) gate which use the operands of a multiplicand A and an augend D in $Ax^C$+D(GF4) operation as a control variable of multi-cascaded PLs. And we also present new PL synthesis algorithms to synthesize QGFSOP expressed 24 (1-qudit) functions by applying three PL operators as ab(mutual permutation), + D(addition), and XA (multiplication). Finally architectures, circuits, and a CMOS implementation to realize proposed PL synthesis algorithms for $Ax^C$+D(GF4) functions are presented.

Design of Iterative Divider in GF(2163) Based on Improved Binary Extended GCD Algorithm (개선된 이진 확장 GCD 알고리듬 기반 GF(2163)상에서 Iterative 나눗셈기 설계)

  • Kang, Min-Sup;Jeon, Byong-Chan
    • The KIPS Transactions:PartC
    • /
    • v.17C no.2
    • /
    • pp.145-152
    • /
    • 2010
  • In this paper, we first propose a fast division algorithm in GF($2^{163}$) using standard basis representation, and then it is mapped into divider for GF($2^{163}$) with iterative hardware structure. The proposed algorithm is based on the binary ExtendedGCD algorithm, and the arithmetic operations for modular reduction are performed within only one "while-statement" unlike conventional approach which uses two "while-statement". In this paper, we use reduction polynomial $f(x)=x^{163}+x^7+x^6+x^3+1$ that is recommended in SEC2(Standards for Efficient Cryptography) using standard basis representation, where degree m = 163. We also have implemented the proposed iterative architecture in FPGA using Verilog HDL, and it operates at a clock frequency of 85 MHz on Xilinx-VirtexII XC2V8000 FPGA device. From implementation results, we will show that computation speed of the proposed scheme is significantly improved than the existing two approaches.

Design of Serial-Parallel Multiplier for GF($2^n$) (GF($2^n$)에서의 직렬-병렬 곱셈기 구조)

  • 정석원;윤중철;이선옥
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.13 no.3
    • /
    • pp.27-34
    • /
    • 2003
  • Recently, an efficient hardware development for a cryptosystem is concerned. The efficiency of a multiplier for GF($2^n$)is directly related to the efficiency of some cryptosystem. This paper, considering the trade-off between time complexity andsize complexity, proposes a new multiplier architecture having n[n/2] AND gates and n([n/2]+1)- $$\Delta$_n$ = XOR gates, where $$\Delta$_n$=1 if n is even, $$\Delta$_n$=0 otherwise. This size complexity is less than that of existing ${multipliers}^{[5][12]}$which are $n^2$ AND gates and $n^2$-1 XOR gates. While a new multiplier is a serial-parallel multiplier to output a result of multiplication of two elements of GF($2^n$) after 2 clock cycles, the suggested multiplier is more suitable for some cryptographic device having space limitations.

Effect of polypropylene and glass fiber on properties of lightweight concrete exposed to high temperature

  • Abdulnour Ali Jazem Ghanim;Mohamed Amin;Abdullah M. Zeyad;Bassam A. Tayeh;Ibrahim Saad Agwa;Yara Elsakhawy
    • Advances in concrete construction
    • /
    • v.15 no.3
    • /
    • pp.179-190
    • /
    • 2023
  • The effect of glass fibres (GF) and polypropylene fibres (PPF) on the fresh properties and mechanical properties of lightweight concrete (LWC) exposed to high temperatures is investigated in this study. In this study, fifteen LWC mixtures were carried out in three different groups reinforced with PPF or GF fibers by 0%, 0.2%, and 0.4% by volume of concrete. The first group included aluminum powder (AP) as an air agent at 0.03% with the normal weight coarse aggregate (NWCA) by 100% of the weight of coarse aggregate. In the second group, 33% of the NWCA weight was replaced by lightweight coarse aggregate (LWCA). In the third group, 67% of the NWCA weight was replaced by LWCA. The slump, unit weight, Compressive strength (CS), tensile strength (TS), and flexural strength (FS) were examined. For two hours, the CS and FS were subjected to elevated temperatures of 200℃, 400℃, and 600℃, in addition to microstructure analysis of concrete. In comparison to the reference mixture, the fresh properties and bulk density of LWC decreased with the use of the air agent or the replacement of 67% of the NWCA with LWCA. As a result of the fiber addition, both the slump test and the bulk density decreased. The addition of fibers increased the CS; the highest CS was 38.5 MPa when 0.4% GF was added, compared to 28.9 MPa for the reference mixture at the test age of 28 days. In addition, flexural and TS increased by 53% and 38%, respectively, for 0.4% GF mixes. As well as, adding 0.4% GF to LWC maintained a higher CS than other mixtures.

Ginsenoside F2 attenuates chronic-binge ethanol-induced liver injury by increasing regulatory T cells and decreasing Th17 cells

  • Kim, Myung-Ho;Kim, Hee-Hoon;Jeong, Jong-Min;Shim, Young-Ri;Lee, Jun-Hee;Kim, Ye Eun;Ryu, Tom;Yang, Keungmo;Kim, Kyu-Rae;Jeon, Byeong-Min;Kim, Sun Chang;Jung, Jae-Kwang;Choi, Jae-Kap;Lee, Young-Sun;Byun, Jin-Seok;Jeong, Won-Il
    • Journal of Ginseng Research
    • /
    • v.44 no.6
    • /
    • pp.815-822
    • /
    • 2020
  • Background: Recently, beneficial roles of ginsenoside F2 (GF2), a minor constituent of Panax ginseng, have been demonstrated in diverse inflammatory diseases. However, its roles in alcoholic liver inflammation and injury have not been clearly understood. Here, we investigated the underlying mechanism by which GF2 ameliorated alcoholic liver injury. Methods: To induce alcoholic liver injury, C57BL/6J wild type (WT) or interleukin (IL)-10 knockout (KO) mice were orally administered with ethanol (3 g/kg) or ethanol-containing GF2 (50 mg/kg) for 2 wk. Liver injury and infiltration of macrophages and neutrophils were evaluated by serum biochemistry and immunohistochemistry, respectively. The changes of hepatic immune cells were assessed by flow cytometry and polymerase chain reaction analysis. In vitro differentiation of naïve T cells was performed. Results: GF2 treatment significantly attenuated alcoholic liver injury, in which infiltrations of inflammatory macrophages and neutrophils were decreased. Moreover, the frequencies of Foxp3+ regulatory T cells (Tregs) increased but IL-17-producing T (Th17) cells decreased in GF2-treated mice compared to controls. Furthermore, the mRNA expression of IL-10 and Foxp3 was significantly increased, whereas IL-17 mRNA expression was suppressed in GF2-treated mice. However, these beneficial roles of GF2 were not observed in GF2-treated IL-10 KO mice, suggesting a critical role of IL-10. Similarly, GF2 treatment suppressed differentiation of naïve T cells into Th17 cells by inhibiting RORgt expression and stimulating Foxp3 expression. Conclusion: The present study suggests that GF2 treatment attenuates alcoholic liver injury by increasing IL-10 expression and Tregs and decreasing IL-17 expression and Th17 cells.