Journal of the Korean Society of Fisheries and Ocean Technology (수산해양기술연구)

The Korean Society of Fisheries and Ocean Technology (한국수산해양기술학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Wear on Sliding Speed of Glass Fiber Reinforcement Composites

유리섬유강화 복합재료의 미끄럼 속도변화에 따른 마모 특성

  • Kim, Hyung Jin (Department of Mechanical System Engineering/Institute of Marine Industry, Gyeongsang National University) ;
  • Koh, Sung Wi (Department of Mechanical System Engineering, Pukyong National University)
  • 김형진 (경상대학교 기계시스템공학과/해양산업연구소) ;
  • 고성위 (부경대학교 기계시스템공학과)
  • Received : 2012.08.01
  • Accepted : 2012.08.20
  • Published : 2012.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

The characteristics of abrasive wear on sliding speed of glass fiber reinforcement (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and surface roughness of these materials on sliding speed were determined experimentally. The major failure mechanisms were lapping layers, deformation of resin, ploughing, delamination, and cracking by scanning electric microscopy (SEM) photograph of the tested surface. As increasing the sliding speed the GF/PUR composites indicated higher friction coefficient. The surface roughness of the GF/PUR composites was increased as the sliding speed was higher in wear test.

Keywords

References

  1. Badmos, A.Y. and D. Ivey, 2001, Characterization of Structural Alumina Ceramics used in Ballistic Armour and Wear Application. J. Mat. Sci. 36, 4995-5005. https://doi.org/10.1023/A:1011885631876
  2. Chand, N., A. Naik and S. Neogi, 2000. Three-Body Abrasive of Short Glass Fibre Polyester Composite. Wear, 242 (1-2), 38-46. https://doi.org/10.1016/S0043-1648(00)00398-7
  3. Dasari, A., Z.Z. Yu and Y.W. Mai, 2009, Fundamental Aspect and Recent Progress on Wear/Scratch Damage in Polymer Nanocomposites. Mat. Sci. and Tech., 63, 31-80.
  4. KEPCO, 2006, Development of Manhole Insulation Cover for Low Voltage. Report KEPCO-05-C26. p. 85.
  5. Kim, B.T. and S.W. Koh, 2008. A Study on Abrasive Wear Characteristics of Side Plate of FRP Ship. J. Kor. Soc. Fish. Tech., 44 (3), 250-256. https://doi.org/10.3796/KSFT.2008.44.3.250
  6. Kim, J.D., H.J. Kim, S.W. Koh and Y.S. Kim, 2010a. Wear Properties of Epoxy Matrix Nonocomposites. J. Kor. Soc. Pow. Sys. Eng., 14 (6), 83-88.
  7. Kim, S.Y., E.B. Kim, Q. Yoo and C.S, Ju, 2010b. Tribological Wear Behavior of PTFE Impregnated with Cu Nano Particles. J. Kor. Soc. Pow. Sys. Eng., 14 (4), 50-55.
  8. Koh, S.W., B.C. Yang, H.J. Kim and J.D. Kim, 2006. Study on Abrasive Wear Behavior of a Carbon Fiber Composites. J. Kor. Soc. Pow. Sys. Eng., 10 (1), 46-51.
  9. Koh, S.W., H.J. Kim, B.T. Kim, S.O. Hwang, J.D. Kim and W.S. Choi, 2007. Effect of Load upon the Abrasive Wear Sillica-Epoxy Resin Composite, Mat. Sci. Forum 544-545, 255-258. https://doi.org/10.4028/www.scientific.net/MSF.544-545.255
  10. Ravikiran, A. and S. Jahanmir, 2001. Effect of Contact Pressure and Load on Wear of Alumina. Wear, 251 (1-12), 980-984. https://doi.org/10.1016/S0043-1648(01)00739-6
  11. Ren, J.R., K.H. Kim and S.S. Kim, 2001. Tribological Evaluation of Dental Composite Resins Containing Prepolymerized Particle Fillers. KSME Int. J., 15 (6), 727-734.
  12. Westergard, R., N. Axen, U. Wiklund and S. Hogmark. 2000. An Evaluation of Plasma Sprayed Ceramic Coatings by Erosion, Abrasion and Bend Testing. Wear, 246, 12-19. https://doi.org/10.1016/S0043-1648(00)00506-8