• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.219-224
• /
• 2022

This study is to propose a alternative gem that is expressed in various ways instead of jewelry with limited output. It was investigated what materials were used in the alternative gem used in the jewelry design thesis over the past five years. In addition, as a result of a survey to understand the needs of customers, it was found that customers also use resin among resins as an alternative gem, like as research trends. Based on this, the scope of resin use as a alternative gem was expanded and applied to jewelry design rather than the existing method of using resin. As a result, it was found out a various uses of resin as an alternative gem. However, the demand and traditionality that correspond to the conditions of jewelry remain challenges to be established through various jewelry design studies in the future. Therefore, in order to utilize the popular preference of alternative gem, continuous research on applying jewelry design to alternative gem should be continued.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.95-99
• /
• 2014

Radiation monitoring is one of the most important process in all places where radioactive material is used including hospital. In this preliminary study, we made GAS electron multiplier (GEM) detector and acquired relative efficiencies in order to see if GEM detector can be useful in radiation monitoring system. The relative efficiency was acquired by using the ratio of GEM detector efficiency to CdTe detector efficiency. The relative efficiency of 72% and 4% was acquired for beta-ray and gamma-ray respectively.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.692-699
• /
• 1994

A bacterial strain which formed a distinct colony on agar plate containing phenol as a vapor phase and grew well in a liquid minimal medium was isolated and identified as Acinetobac- ter sp. GEM2. The optimal temperature and initial pH for the growth of Acinetobacter sp. GEM2 were 30$\circ$C and 7.0, respectively. Cell growth was inhibited by phenol at the concentration over 1500 ppm. Cell growth dramatically increased from 10 hours after cultivation and almost showed a stationary phase within 24 hours at which 95% of phenol was concomitantly degraded. Acinetobac- ter sp. GEM2 was capable of growing on aromatic compounds, such as benzoic acid, phenol, m- cresol, o-cresol, P-cresol, catechol, gentisic acid, and toluene, but did not grow on benzene, salicylic acid, p-toluic acid, and p-xylene. By the analysis of catechol dioxygenase, it seemed that catechol was degraded through both meta- and ortho-cleavage pathway. The growth-limiting log P value of Acinetobacter sp. GEM2 on organic solvents was 2.0.

• Journal of Radiation Protection and Research
• /
• v.30 no.2
• /
• pp.69-75
• /
• 2005

Gas avalanche microdetectors, such as micro-strip gas chamber (MSGC), micro-gap chamber (MGC), micro-dot chamber (MDOT), etc., are operated under high voltage to induce large electron avalanche signal around micro-size anodes. Therefore, the anodes are highly exposed to electrical damage, for example, sparking because of the interaction between high electric field strength and charge multiplication around the anodes. Gas electron multiplier (GEM) is a charge preamplifying device in which charge multiplication can be confined, so that it makes that the charge multiplication region can be separate from the readout micro-anodes in 9as avalanche microdetectors possible. Primary electron collection efficiency is an important measure for the GEM performance. We have defined that the primary electron collection efficiency is the fractional number of electron trajectories reaching to the collection plane from the drift plane through the GEM holes. The electron trajectories were estimated based on 3-dimensional (3D) finite element method (FEM). In this paper, we present the primary electron collection efficiency with respect to various GEM operation parameters. This simulation work will be very useful for the better design of the GEM.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1277-1281
• /
• 2020

A novel ceramic Gas Electron Multiplier (GEM) has been developed to meet the demand of high counting rate for the neutron detection which is an alternative to ³He-based detector at China Spallation Neutron Source (CSNS). An experiment was performed to measure the neutron transmittance of ceramic-GEM and FR4-GEM at the small angle neutron scattering (SANS) instrument. The result showed the ceramic-GEM has higher transmittance and less self-scattering especially for cold neutrons. One single ceramic GEM could give a gain of 10²-10⁴ in the mixture gas of Ar and CO₂ (90%:10%) and its energy resolution was about 27.7% by using ⁵⁵Fe X ray of 5.9 keV. A prototype has been developed in order to investigate the performances of the ceramic GEM-based neutron detector. Several neutron beam tests, including detection efficiency, spatial resolution, two-dimensional imaging, and wavelength spectrum, were carried out at CSNS and China Mianyang Research Reactor (CMRR). The results show that the ceramic GEM-based neutron detector is a good candidate to measure the high intensity neutrons.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.35-37
• /
• 2005

The radiation detector research group at KAERI has developed a high efficiency neutron detector using a Gas Electron Multiplier (GEM). The double GEM was fabricated and operated in an Ar/Isobutane mixture. For an application to a high efficiency neutron detector, $^6Li\;or\;^{10}B$ neutron converters coated on each surface of the multi GEM foils were considered. The optimized thickness of the thin film for a neutron detection was calculated with the MCNP and SRIM. The neutron efficiency was calculated by changing the chemical components of the thin film, and the thickness of the thin film. The thermalized neutrons were measured by a GEM detector with a thin neutron converter on the drift plate.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.219-228
• /
• 1990

A kanamycin resistance($Km^r$) gene was studied for its transfer in natural freshwater environments by using the natural bacterial isolate(M1) of DK1 and the DKC601 strain, $Km^r$ plasmid of which was genetically engineered from the NI strain. The transfer frequency ofthe $Km^r$ gene and rearrangement of the $Km^r$ plasmid were compared between the gnetically engineered microorganism(GEM) and the NI parental strain by conjugation with the same recipient strain. The transfer frequency of the $Km^r$ gene was about $9.1\times 10^{-12}-1.8\times 10^{-11}$ in both the GEM and NI strains at 5 to $10^{\circ}C$, but the frequency of the NI was about 10 times higher than that of the GEM at 20 to $30^{\circ}C$. The $Km^r$ plasmid in the transconjugants obtained by conjugation of the NI with the MY1 strain as a ricipient showed alot of rearrangement, but the $Km^r$ plasmid transferred from the GEM was stable without alteration of its size. When the MT2 strain was used as a recipient, however, such a rearrangement of the $Km^r$ plamid was observed in the transconjugants obtained from the GEM as well as the NI strain. In those transconjugants obtained from different mating pairs and water environments, the plasmid were appeared to decrease in their number as the period of conjugation time was prolonged, but only the $Km^r$ plasmid transferred from the GEM kept having its size of 52kb. Therefore, the $Km^r$ gene was transferred at the same rate from the GEM and NI strains in natural freshwater environment, but the gene of the GEM strain was more stable than the NIduring conjugation and the $Km^r$ plasmid was rearranged by changing the recipient strain for conjugation in any water environments.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1143-1144
• /
• 2004

In this study, we analyze electric field properties in the GEM by using a finite element method. Compared with 3D simulation, modeling of the GEM in 2D rz coordinates is very efficient because of exact simulation results and much saved computational time. The ECE, which is an important measure designating the GEM performance, is estimated by calculating the fractional field-line transparencies. The ECE for various GEM structures and operational parameters are investigated and the results will be presented. This simulation work is very useful for the better design of the GEM.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.265-278
• /
• 2015

We analyzed the North Pacific Intermediate Water (NPIW) that was simulated in 25 coupled general circulation models (CGCMs) using historical and Representative Concentration Pathway 4.5 (RCP4.5) scenario experiments of Coupled Model Intercomparison Project Phase 5 (CMIP5), focusing on the evaluation of the performance of HadGEM2-AO. A large inter-model diversity in salinity, density, and depth of the NPIW exists even though the multi-model ensemble mean (MME) is comparable to observations. It was found that the depth of the NPIW tends to be deeper in the models in which the NPIW is relatively saltier. HadGEM2-AO simulates the lightest NPIW having the lowest salinity at shallower depth, compared with other CGCMs. Future projections of the NPIW show that the temperature of the NPIW increases, but the density decreases in all CMIP5 models. It was shown that the salinity of the NPIW decreases in most models and the decrease tends to be larger in models simulating the lighter NPIW. The HadGEM2-AO projects moderate changes in the temperature and density of the NPIW out of the CMIP5 models.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.43-49
• /
• 2016

This paper explains concepts and methods of indexes measuring gender gaps. There are mainly 4 indexs, GDI, GEM, GII and GGI. UNDP developed GDI, GEM and GII. WEF developed GGI. Each index has its own strengths and weak points. Therefore it is important to understand each index in detail. For Korea, as men and women have been developed equally in areas of education and health, the GDI score was in a high group. However, the GEM and GGI scores were low. This implies that in order to reduce gender gaps, it is necessary to expand gender equality policies empowering economic and political empowerment.