• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.91-97
• /
• 2001

These Study are for the development of the reliability assessment test code and test equipment and test procedures of the heavy sluice gate hydraulic cylinder. Because there is no reliability test code for the heavy sluice gate hydraulic cylinder inside and outside of the country, the modified reliability test code is made reference for the related existing standards like as ISO, JIS, MIL, TUV, DIN, KS and etc. In this study, the novel method is proposed to evaluate efficiency of the heavy sluice gate hydraulic cylinder on the loading conditions and established the conditions of the acceleration life test to reduce the testing time and cycles. The testing equipments for life test, lode operating test, high and low temperature test and salt spray test have been established for 8 month, and the reliability tests are accomplished. The test results of the heavy sluice gate hydraulic cylinder which is produced and tested initially in Korea are satisfied the durability life cycle on the using conditions.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.66-71
• /
• 2016

Smart building gate security control system using smartphone integrated with near field communication (NFC) has become part of daily life usage these days. The technology change in replacing RF NFC device using visible light communication technology based approach growing faster in recent days. This paper propose a design and development of gate security control system using color code based user authentication ID generation as part of an intelligent access control system to control automatic door open and close. In this approach gate security access control use the recent visible light communication technology trends to transfer the user specific authentication code to door access control system using color code on smartphone screen. Using a camera in the door access control system (ACS), color codes on smartphone screens are detected and matched to the database of authenticated user to open the door automatically in gate security system. We measure the visual light communication technology efficiency as a part of the research and the experiments have revealed that more than 95% users authenticated correctly at the suggested experiment environment on gate security control system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2019

In this paper, we consider interferences from other automobile pulse radars using same frequency spectrum. In order to eliminate the interference, we propose the PN code modulation method. This method uses the cross-correlation between PN codes with different seed. The ROC performance is used for comparing the proposed detector to conventional method. And the proposed detector can decide the present or absent of targets and measure the range of the targets by using memory buffer of range gate. Especially, we use false alarm probability for all range gates. That is the false alarm if in any one range gate the false alarm occurs. From the simulation result, we can see that the proposed detector with using PN code is not influenced by interferences.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.529-535
• /
• 2020

Geant4 is compatible with the Windows operating system in C++ language use, enabling interface functions that link DICOM or software. It was simulated to address the basic structure of the simulation using Geant4/Gate code and to specifically verify the density composition and lung cancer process in the human phantom. It was visualized using the Gate Graphic System, i.e. openGL, Ray Tracer: Ray Tracing by Geant4 Tracing, and using Geant4/Gate code, lung cancer is modeled in the human phantom area in 3D, 4D to verify the simulation progress. Therefore, as a large number of new functions are added to the Gate Code, it is easy to implement accurate human structure and moving organs.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.323-328
• /
• 2019

In this paper, a method of constructing an advanced sequential circuit over finite fields is proposed. The method proposed an algorithm for assigning all elements of finite fields to digital code from the properties of finite fields, discussed the operating characteristics of T-gate used to construct sequential digital system of finite fields, and based on this, formed sequential circuit without trajectory. For this purpose, the state transition diagram was allocated to the state dependency code and a whole table was drawn showing the relationship between the status function and the current state and the previous state. The following status functions were derived from the status function and the preceding table, and the T-gate and the device were used to construct the sequential circuit. It was confirmed that the proposed method was able to organize sequential digital systems effectively and systematically.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.485-500
• /
• 2024

A hardware architecture is presented to decode (N, K) polar codes based on a low-density parity-check code-like decoding method. By applying suitable pruning techniques to the dense graph of the polar code, the decoder architectures are optimized using fewer check nodes (CN) and variable nodes (VN). Pipelining is introduced in the CN and VN architectures, reducing the critical path delay. Latency is reduced further by a fully parallelized, single-stage architecture compared with the log N stages in the conventional belief propagation (BP) decoder. The designed decoder for short-to-intermediate code lengths was implemented using the Virtex-7 field-programmable gate array (FPGA). It achieved a throughput of 2.44 Gbps, which is four times and 1.4 times higher than those of the fast-simplified successive cancellation and combinational decoders, respectively. The proposed decoder for the (1024, 512) polar code yielded a negligible bit error rate of 10^-4 at 2.7 E_b/N_o (dB). It converged faster than the BP decoding scheme on a dense parity-check matrix. Moreover, the proposed decoder is also implemented using the Xilinx ultra-scale FPGA and verified with the fifth generation new radio physical downlink control channel specification. The superior error-correcting performance and better hardware efficiency makes our decoder a suitable alternative to the successive cancellation list decoders used in 5G wireless communication.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.771-778
• /
• 2007

A container terminal gate is not only an entrance of containers, but also the first input point of containers' information. Therefore, to achieve the accuracy of container information, there are various containers' numbers recognition methods used. Gate productivity can significantly vary depending upon those recognition methods. Recently, RFID which is one of the u-IT businesses run by the Korean government is under consideration for application to the gate as an automatic system. If RFID is used, it is expected to have both the qualitative benefits through avoiding defects of other systems and the quantitative benefits by improving productivity. Hence, this study aims to provide some insight on the benefits of RFID, and to compare productivity of the existing gate system with the RFID gate system based on computer simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2001

An automatic design system for a hydraulic gate has been developed to cut down the time for the design calculation and to optimize its design. It is oriented to the radial gate which is the simplest, most reliable, least expensive and most widely used hydraulic gate. This system is composed of data input, strength computation and result display modules with databases of the properties of components and materials. In this development, the existing intricate design procedure has been changed to the straightforward procedure without assumption of weight. With this code, the design time of the radial gate could be reduced below one thirtieth in comparison with manual work and the optimum design could be accomplished easily.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.309-310
• /
• 2007

컨테이너터미널의 Gate는 컨테이너의 출입구를 의미하는 것 외에 컨테이너 정보의 최초 입력점이라는 중요한 의미를 가지고 있다. 따라서 컨테이너 정보의 정확한 습득을 위해 다양한 컨테이너 변호 인식방법이 사용되고 있으며, 이러한 적용방법에 따라 Gate의 생산성에도 많은 차이가 발생하고 있다. 최근, 정부의 u-IT사업추진에 따라 적용되기 시작한 RFID를 이용한 Gate자동화 방식은 기존시스템에 대한 새로운 접근을 요구하게 되었다. RFID를 이용함에 따라 각 시스템의 단점을 보완하는 정성적 이점과 더불어 정량적 생산성 향상이라는 기대치도 높아지게 되었다. 따라서 본 연구에서는 RFID를 이용한 Gate 자동화 시스템과 기존의 Gate시스템과의 생산성 차이를 시뮬레이션을 통해 검증함으로써 RFID 방식의 Gate를 고려하고 있는 컨테이너터미널에 관련된 정보를 제공하고자 하였다.