• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.769-777
• /
• 2017

The research of air gap flux density has a significant effect on predicting and optimizing the structure parameters of electrical machines. In the paper, the air gap coefficient, leakage flux factor and saturation coefficient are first analytically expressed in terms of motor properties and structure parameters. Subsequently, the analytical model of average air gap flux density for surface-mounted permanent magnet synchronous machines is proposed with considering slotting effect and saturation. In order to verify the accuracy of the proposed analytical model, the experiment and finite element analysis (FEA) are used. It shows that the analytical results keep consistency well with the experimental result and FEA results, and the errors between FEA results and analytical results are less than 5% for SPM with high power. Finally, the analytical model is applied to optimizing the motor structure parameters. The optimal results indicate that the analytical calculation model provides a great potential to the machine design and optimization.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.4
• /
• pp.53-61
• /
• 2010

An impervious cover in the watershed management has been used as effective indicators. It is a very useful barometer to measure the impacts of watershed development on aquatic systems. Hence, it is necessary to survey the impervious cover of a watershed and to develop an impervious cover model (ICM) for supporting best management practices. The main objectives of this study were to investigate the spatial patterns of the impervious cover, to calculate landscape indices using FRAGSTATS, and to develop an ICM in the Gap-stream watershed and its six sub-watersheds. The results showed that the impervious cover of the Gap-stream watershed increased from 4.9 % in 1975 to more than 11.2 % in 2000, the number of impervious cover fragments increased from 662 to 3,578, and the landscape shape index increased from 27.0796 to 91.1982. Fragmentation was severe within the Yudeungcheon downstream and the Gapcheon downstream of six sub-watersheds. This paper presented the results derived landscape indices to define landscape patterns and structure for the Gap-stream watershed. Our results indicate that altered land use might be influenced changes in landscape structure.

• Korean Journal of Human Ecology
• /
• v.13 no.6
• /
• pp.959-966
• /
• 2004

The purpose of this research is to analyze the shape of gathered skirts made by different gatherings. The shape of gathered skirts is affected by the amount of the gatherings that control fullness along a waistline seam. The gap also has an effect on the shape. We made a few experiments to make gathered skirts in different gathering conditions. The conditions include two types of ratio of gathers, which were given the total amount of gathering, and two types of spread of gathers, which were calculated for waist and hip. Experiments were conducted to figure out the dressed shape through 3-D measurement Exyma- WBS, and also to investigate the proportion, area distribution, and gap of the shape of gathered skirts on the horizontal section map with Rapid Form 2004 SP3, a software for 3-D shape analysis. As the results show, there were differences among the proportion, area distribution, and gap of the dressed shape. It showed that the shape on the horizontal section map was different because the shape between waist and hip per parts on body was not the same.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.51-56
• /
• 2017

Purpose - The study verified the effects of consumers' knowledge perception upon word-of-mouth intention and purchase intention of consumers who were exposed to a lot of information, and examined consumer's behavior from multi-dimensional points of view. Research design, data, and methodology - The study conducted the test of difference between consumer's cognition on importance and satisfaction of HMR product by gap of HMR (Home Meal Replacement) product for IPA analysis. The consumer's reliability and words-of-mouth were measured by the questionnaire method with 4 questions according to Likert 7-point scale. Conversion into z-score removed the difference of variables. Results - The causal relation model for importance, satisfaction and gap, not relying upon multi-dimensional scaling and others, could construct causal relation model to give implications. Difference (d) of the products could lessen consumer's reliability to increase consumer's knowledge perception, word-of-mouth intention, knowledge perception, and purchase intention. Therefore, enterprises should make an effort to lessen consumers' complaint for the products and to elevate consumers' reliability. Enterprises also try to give consumers exact information and to promote purchase intention. Conclusions - Difference (d) of consumers' complaint and/or disappointment decreased consumers' reliability to increase knowledge perception. Enterprises should supply consumers with products according to their requirements to minimize the gap and to give them proper information.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.827-836
• /
• 2004

The design parameter of the heat loss for the pressurized water reactor has been studied. The heat loss from the reactor vessel through the air gap. insulation are analysed by using the computational fluid dynamics code, FLUENT. Parametric study has been performed on the air gap width between the reactor vessel wall and the inner surface of the insulation, and on the insulation thickness. Also evaluated is the performance degradation due to the chimney effect due to gaps left between the panels during the installation of the insulation system. From the analysis results, the optimal with of air gap and insulation thickness and the value of heat loss are obtained The results show how the heat loss varies with the air gap width and insulation thickness. The temperature and the velocity distributions are also presented. From the results of the evaluation. the optimal air gap width and the optimal insulation thickness are obtained. As the difference between the predicted heat loss and measured heat loss from the reactor vessel is construed Primarily as losses due to chimney effect. the contribution of the chimney effect to the total heat loss is quantitatively indicated.

• The Korean Journal of Health Service Management
• /
• v.10 no.1
• /
• pp.143-154
• /
• 2016

Objectives : The aim of this study was to validated the effectiveness of the information gap in work and daliy life satisfaction. Additionally, this study attempted to verify the mediating effect of self-esteem. Methods : The study examined 327 students who participated in a study on the PSWCI 1st Wave by KCOMWEL. Data were analyzed through descriptive statistics using the reliability test in SPSS 22.0 Ver. Moreover, hypothesis testing was analyzed with covariance based on structure equation modeling (CB-SEM) using Amos 21.0 Ver. Results : The low information gap has a positive effect on satisfaction with work and daily life. Additionally, self-esteem also has a positive effect on each satisfaction measure. However, self-esteem does not have a mediating effect between information gap and each satisfaction measure. Conclusions : The results of the study found the factor of effect on effect factor on beneficiary's satisfaction of industrial accident compensation insurance. Therefore, new ways need to be found that reduce the information gap and increase self-esteem.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1169-1181
• /
• 2005

Experimental and numerical studies on the unsteady wake field behind a square cylinder near a wall were conducted to find out how the vortex shedding mechanism is correlated with gap flow. The computations were performed by solving unsteady 2-D Incompressible Reynolds Averaged Navier-Stokes equations with a newly developed ${\epsilon}-SST$ turbulence model for more accurate prediction of large separated flows. Through spectral analysis and the smoke wire flow visualization, it was discovered that velocity profiles in a gap region have strong influences on the formation of vortex shedding behind a square cylinder near a wall. From these results, Strouhal number distributions could be found, where the transition region of the Strouhal number was at $G/D=0.5{\sim}0.7$ above the critical gap height. The primary and minor shedding frequencies measured in this region were affected by the interaction between the upper and the lower separated shear layer, and minor shedding frequency was due to the separation bubble on the wall. It was also observed that the position (y/G) and the magnitude of maximum average velocity $(u/u_{\infty})$ in the gap region affect the regular vortex shedding as the gap height increases.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.595-605
• /
• 2021

The objectives of this research are to see if the phenomena of "demand following" and "supply leading" exist in the business cycle, as well as to look at how liquidity and output react to changes in credit risk, investment-saving gap, inflation, exchange rate, and growth rate of real national output. Employing quarterly data of Maluku and North Maluku (2008-2019), this study utilizes VAR/VECM for inferential analysis. This research found three important findings. First, liquidity and output growth influenced each other in the long run. Second, the determinants of output growth for Maluku are liquidity, investment-saving gap, and inflation, while the determinants of liquidity are output-growth, the gap of investment-saving, and inflation. Third, the determinants of output growth for North Maluku are liquidity, credit risk, investment-saving gap, inflation, exchange rate, and the national output-growth, while the determinants of liquidity are output-growth, credit risk, investment-saving gap, inflation, exchange rate, and national output-growth. The findings of this study supported the hypothesis of demand following and supply leading theory in the Maluku and North Maluku business cycles. This study concludes that economic development would improve if supported by liquidity adequacy through increased deposit growth.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.173-183
• /
• 2010

In this paper, acoustic transmission characteristics are theoretically considered on a cylindrical cavity system. The cylindrical cavity system is a simplified model of the acoustic cavity of King Seongdeok Divine Bell and it consists of a main cavity, a gap and an auxiliary cavity, Under a point sound source in the main cavity, acoustic frequency response property is determined and acoustic modes are analysed. The results are compared with those by the boundary element analysis using SYSNOISE. Using the proposed theoretical method, the effect of the auxiliary cavity and the gap on the resonance frequency and sound transmission characteristics is identified. Finally the best combination of the auxiliary cavity and gap is determined for the maximum transmission of the source frequency.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.155-162
• /
• 2018

This study attempts to analyze the consumers' preference on Korean Red Ginseng Tonic, which is an essential product to revitalize Korean ginseng industry, using choice experiment method. The attributes used in the choice experiment were the ginseng age, good agricultural products(GAP), sugar, and price. A total of 1,796 experiments were collected and the value of each preferred attributes was estimated using a multinomial logistic model. The result shows that the products made from six-year-old and GAP(Good Agriculture Practice) approved Korean ginseng with less sugar were preferred. These estimated monetary values of marginal willingness to pay were about 94,000 KRW, 89,000 KRW, 5,000 KRW, respectively. Thus, the efforts to introduce and advertize GAP approved ginseng while developing new products with preferred attributes by general publics are necessary in the short run. In addition, we may need to consider developing the way to promote products using 4- and 5-year-old ginsengs, which are relatively underestimated in their health effectiveness but highly productive for farmers in the long run.