• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.641-646
• /
• 1995

During the screening of inhibitors of melanin biosynthesis from microbial secondary metabolites, a fungal strain MR304 which was capable of producing high level of an inhibitor was selected. Based on taxonomic studies, this fungus could be classified as Trichoderma harzianum. The active compound (MR304-1) was purified from culture broth by Diaion HP-20 column chromatography, ethylacetate extraction, Sephadex LH-20 column chromatographv and HPLC. The inhibitor was identified as 3-(1,5-dihvdroxy-3-isocyanocyclopent-(E)-3-envl)prop-2-enoate by spectroscopic methods of UV, ESIMS, $^{1}$H-NMR, $^{13}$C-NMR, NOE, HMQC and HMBC. MR304-1 showed strong mushroom tyrosinase inhibitory activity with IC$_{50}$ value of 0.25 $\mu $g/ml. It inhibited melanin biosynthesis with 15 mm inhibition zone at 30 $\mu $g/paper disc in Streptomyces bikiniensis, a bacterium used as an indicator organism in this work. It also inhibited melanin biosynthesis in B16 melanoma cells with a niinimum inhibitory concentration of 0.05 $\mu $g/ml.

• Laser Solutions
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.659-664
• /
• 1992

Twelve day old Pabna zebu calves of similar weights were assigned at random to 3 different calf starter-rations namely $T_0$, $T_1$ and $T_2$ to determine the effect of feeding regimes and growth pattern of calves upto 3 months of age. Calves allowed to intake starter 0.5 percent of body weight from 2nd week on to 7th weeks of age, while starter at 1 percent of body weight was allowed later on upto 13th weeks of age. Calves started to intake green grass after 2nd to 3rd weeks and average intake per day was limited to 1 kg upto the end of experiment, while calves started to take rice straw ad libitum after 6th weeks of age. Colostrum feeding was offered ad libitum and in addition calves suckled their dam's milk shortly before and after milking usually in the morning and evening. Growth of calves in different treatment groups was found statistically insignificant. The mean growth rate per head per day ranged from 196.43-375.0 g for $T_0$ group, 185.72-360.72 g for $T_1$ group and 180.1-385.72 g for $T_2$ group respectively between 1st to 7th weeks of age while the growth rate ranged from 309.53-328.57 g for $T_0$, 304.29-342.86 g for $T_1$ and 304.77-333.30 g for $T_2$ groups respectively from 9th weeks on to the end of the experiment.

• Korean Journal of Agricultural Science
• /
• v.21 no.1
• /
• pp.37-44
• /
• 1994

This study was carried out to investigate meat production ability of special poultry(Ogol fowl, pheasant and mallard). The results obtained Were summarized as follows ; 1. On the average live weight in male and female of Ogol fowl and mallard were 1,304.0~1,311.8g, 1,013.0~1,138.8g, respectively. The live weight of pheasant was lighter than that of Ogol fowl and mallard. The ratio of carcass to live weight in pheasant, Ogol fowl and mallard were 70.9~72.2%, 66.9~68.2% and 65.4~65.9%, respectively. 2. On the edible giblets ratio to live weight, the that of mallard was the highest(6.3%), while the that of Ogol fowl was the lowest(4.7~4.8%) in each individual poultry. 3. On the cut-up parts ratio to carcass weight, the neck(6.7~8.3%) and back(16.1~18.0%) ratio of pheasant were lower than that of Ogol fowl and mallard, but the neck(11.1~13.3%), wings(14.6~16.2%) and back(23.6~5.2%) ratio of mallard were higher than the others. 4. On the ratio of meat to breast and legs parts, the yield of breast meat was higher than that of legs meat of all poultries. In mallard, the skin ratio on both parts(17.6~22.9%) was higher than the others, while the bone ratio of pheasant and Ogol fowl(15.6~20.6) was higher than that of mallard.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.4 no.1
• /
• pp.177-197
• /
• 1998

This experimental study was carried out to evaluate the effect of Yipahnsan on angiogenic inhibition mechanism. This study investigates the effects of Yipahnsan on angiogenic inhibition mechanism evaluate cell adhesive inhibition effect, DNA fragmantaion analysis, nuclear condensation assay, FACScan analysis, angiogenic lumen formation assay, immunocytochemistry analysis, RT-PCR for mRNA expression, western blot analysis, confocal analysis for $Ca^{2+}influx$. The results were summarized as follows : 1. The cell adhesive inhibition ability was strongly increased from $5{\mu}g/ml$ on ECV304 cell line and ECVPAR cell line. 2. YY water extract caused $G_0/G_1$ arrest peak to existed on the ECV304 cell line. 3. YY water extract caused inhibition of proliferation and inducement of apoptosis on the collagen coated plate in ECV304 cell line. 4. YY water extract inhibited the lumen formation on the matrigel coated plate in ECV304 cell line. 5. YY water extract inhibited the expressions of LFA-1 and ELAM-1 on ECV304 cell line and ECVPAR cell line. 6. YY water extract inhibited the expressions of MMP-9 and uPA on ECV304 cell line and ECVPAR cell line. 7. YY water extract inhibited the expression of integrin ${\alpha}_v{\beta}_3$ on ECV304 cell line and ECVPAR cell line. 8. YY water extract decreased the change of $Ca^{2+}$ in intracellular on ECV304 cell line and ECVPAR cell line. According to the results, Yipahnsan showed to be a key antagonist of integrin ${\alpha}_v{\beta}_3$, and to be induction of apoptosis by p53 through flow cytometry. This report also demonstrated that expressions of MMP-9 and uPA were blocked under the angiogenesis model. Thus, we suggested that Yipahnsan blocks angiogenesis by inducing apoptosis in ECV304 and ECVPAR cell lines, and another oriental herbal medicine that treats qi-stagnation and blood-stasis type also has angiogenic inhibition effects.

• Journal of the Korean Chemical Society
• /
• v.40 no.3
• /
• pp.161-166
• /
• 1996

6-ethyl-5,6-dihydrouracil($C_6H_10N_2O_2$) is monoclinic, space group $$P2_{1}c}$$ with a=10.302(2), b=10.419(3), $c=7.095(1)\AA$, $\beta=106.6(0)$, Z=4, $V=729.7(3)\AA$^3$$, $D_c=1.29 g/cm^3,\;{\lambda}(MoK\alpha)=0.71073\AA$, $\mu=0.010cm^{-1}$, F(000)=304, and R=0.054 for 1070 unique observed reflection with F>4.0 $\sigma(F).$ The structure was solved by direct methods and refined by full-matrix least-squares refinement with the fixed C-H bond length at $0.96\AA.$ The hydrouracil molecule makes an envelope conformation with the ethyl substituent oriented to an axial position attainable to a varying degree of steric strain. There are two intermolecular hydrogen-bondings via N-H---O interactions, being nearly parallel to the 100 plane. The shortest distance between molecules is $3.187\AA$ of C(4) and O(8) (-x,-y, 1-z).

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.301-304
• /
• 1998

Methylobacterium organophilum can use nitrogen in the form of ammonium ions ($($NH_4$)_2SO_4\;and\;NH_4Cl) and from nonammonium sources such as glycine, alanine, peptone, and yeast extract. When potassium was limited, significantly more PHB was produced when the ammonium ion was the nitrogen source rather than a nonammonium form. With ammonium, the amount of PHB produced was 0.50-0.53 g PHB/l or $52.0~53.2\%$ of the dry cell weight. If nitrogen was from a nonammonium source, the respective values were 0.04~0.06 g PHB/1 or $8.1~11.3\%$ of dry cell weight. When ammonium sulfate was the sole source of nitrogen under potassium-limited conditions, cell growth and PHB accumulation increased as the pH increased from 6.0 to 7.5. Cell growth and PHB amount at pH 7.5 were 2.50 g dry cell weight/1 and 1.40 g PHB/1, respectively.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.774-781
• /
• 2008

was performed and Staphylococcus sciuri, Bacillus cereus, Escherichia coli, Proteus mirabilis, and Enterococcus faecalis were identified. No Salmonella strain, a typical contaminant of eggs, was found. The radiation sensitivities of isolated bacteria and Salmonella typhimurium, in an inoculated model system, were expressed in $D_{10}$ values. The ranges of $D_{10}$ values shown by S. typhimurium, S. sciuri, B. cereus, E. coli, P. mirabilis, and E. faecalis were 0.365-0.399 kGy, 0.418-0.471 kGy, 1.075-1.119 kGy, 0.280-0.304 kGy, 1.132-1.330 kGy, and 0.993-1.290 kGy, respectively. The growth of all six test bacteria in eggs (inoculated at $10^6-10^7\;CFU/g$) during 3 days of post-irradiation storage at ambient conditions ($25^{\circ}C$) was recorded. S. typhimurium was eliminated by irradiation at 3 kGy, and E. coli and S. sciuri were eliminated by irradiation at 5 kGy. The viable cell counts of B. cereus, P. mirabilis, and E. faecalis in eggs showed 4-6 log reductions after irradiation with 5 kGy.

• Journal of the East Asian Society of Dietary Life
• /
• v.1 no.3
• /
• pp.299-304
• /
• 1991

In this study the effects of water extracts of endocarps and seeds of omija(Schizandra chinensis Baillon)on alcohol metabolism in rats were investigated. 25% alcoholic solution(v/v,0.75g/200g B.W.)and 40% alcoholic solution(v/v,0.80g/200g B.W.)were orally administered to rats for 2 hours. The levels of metabolites and enzyme activities both on serum and liver were not changed by acute oral adminiatration of 25% and 40% alcoholic solution. Blood alcohol levels were significantly lowered by treatment of water extracts of endocarps and seeds of omija in rats administered with 25% and 40% alcohol. In 25% alcohol treated group, serum GPT level was decreased but hepatic G-6-P DH and pyruvate levels were increased. In 40% alcohol treated group, water extracts of endocarps and seeds of omija resulted in a significant decreased in serum levels of FFA, GPT but increased in serum glucose level. Hepatic levels of cytosolic protein, glycogen and pyruvate were increased by water extracts of omija parts in 40% alcohol treated group.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2019

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.