• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.134-138
• /
• 2013

Benzo[a]pyrene, a polycyclic aromatic hydrocarbon (PAH) whose metabolites are mutagenic and highly carcinogenic, is listed as a Group 1 carcinogen by the IARC. In this study, Arabica and Robusta green coffee beans were roasted under controlled conditions and the formation of benzo[a]pyrene during the roasting process was monitored. The concentration of benzo[a]pyrene in ground coffee and brewed coffee were determined by a HPLC-fluorescence detector. The limit of detection (LOD) and limit of quantitation (LOQ) of benzo(a)pyrene were 0.03 and $0.09{\mu}g/kg$, respectively. Benzo[a]pyrene was only detected in the dark roast of ground coffee, with a concentration ranging from $0.147{\sim}0.757{\mu}g/kg$. The content of benzo[a]pyrene in Ethiopia Mocha Harrar G4 is the highest ($0.757{\mu}g/kg$).

• Korean Journal of Environmental Agriculture
• /
• v.10 no.2
• /
• pp.113-118
• /
• 1991

The soil residual amount of herbicides nitralin and napropamide was determined in 6 winter crops field using a chemical assay method. Chemical analysis on soil residue revealed that a relatively high amount of nitralin was detected between 150 and 200 days after treament(DAT). However, regardless of soil types the residue at 220 DAT ranged from 0.053 to 0.141ppm and from 0.134 to 0.308ppm, at the rate of 75 and 150 g a.i./10a, respectively. The residue of napropamide applied at the rate of 75 g a.i./l0a ranged from 0.006 to 0.072ppm at 150 DAT, but not detectable at 220 DAT. When application rate increased to 150 g a.i./10a, napropamide residue was between 0.005 and 0.16ppm at 150 DAT and less than 0.004ppm at 200 DAT, and was not detected at 220 DAT, irrespective of soil types. The results of chemical analysis for the two herbicides showed a similar trend to those obtained from the experiments in agar medium and fields.

• Journal of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.71-94
• /
• 1991

With the 14 m radio telescope at DRAO and the 4 m at Nagoya University, we have made detailed maps of $^{12}CO$ and $^{13}CO$ emissions from two Barnard objects B133 and B134 in the $J=1{\rightarrow}O$ rotational transition lines. Usual LTE analyses of the CO observations led us to determine the distribution of column densities over an entire area encompassing both globules. Total gas masses estimated from the column density map are $90\;M_{\odot}$ and $20\;M_{\odot}$ for B133 and B134, respectively. The radial velocity of B133 is red shifted with respect to B134 by $0.8\;km\;s^{-1}$, which is too lagre to bind the two clouds as a binary system. We have shown that the usual stability analysis based on the simplified version of virial theorem with the second time-derivative of the moment of inertia term $\ddot{I}$ being ignored could mislead us in determining whether a given cloud eventually collapses or not. The lull version of the scalar virial theorem with the $\ddot{I}$ term is shown to be useful in following up the time-dependent variations of the cloud size R and its streaming velocity $\dot{R}$ as functions of time. Results of our stability analysis suggest that B133 will eventually collapse in $(2{\sim}4){\times}10^6$ years.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.134-134
• /
• 2003

Bovine embryos produced by in vitro maturation, feretilization and development was examined for presevation and transfer. The fertilization medium used BO medium with 5 mM/$m\ell$ caffeine and 10$\mu\textrm{g}$/$m\ell$ heparin and adjusted to a pH of 7.2 to 7.4. The final concentration of spermatozoa was adjusted to 1$\times$$10^{6}$ cells/$m\ell$ motile sperm during fertilization in vitro. At 8~10 hrs after insemination, the oocytes were transferred into CR1aa medium and cultured for 7 days. Embryos were preserved by vitrification method for transfer. When the embryos of early, blastocyst and expanded blastocyst stages were frozen-thawed, the proportions of embryos with normal morphology 83.6, 88.1 and 85.2%. (중략)

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.407-414
• /
• 2020

To replace the sawdust in the growth medium of oyster mushroom to utilize its by-product spent mushroom substrates (SMS) as feed for ruminant, we performed cultivation test using cotton seed hull pellet (CSHP), corn stalk pellet (CSP), corncob (CC), and analyzed the feed chemical properties of those SMS. As a result of cultivation test, CC and CSHP treatment took 27 days for spawn run, 4 days for primordium formation, and 3 days for development fruiting bodies, resulting in a total cultivation period of 34 days. The yield per bottle was 134 g for CC treatment, similar to 130 g for control, while CSHP treatment (112 g) and CSP treatment (68 g) were lower than that of control. The highest biological efficiency (BE) was shown in CC treatment as 80.1%, which was 11.4% higher than 68.7% of control. The SMS of CC treatment had a relatively low content of neutral detergent fiber and acid detergent fiber, and in particular, lignin content was the lowest and crude protein content was the highest among other treatments. Therefore, CC as a substitute material for sawdust was capable of stable mushroom production and excellent nutritional value as a feed for its by-products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1139-1144
• /
• 2009

The purpose of this study is to determine the possibility of using Pueraria flos as natural health food source. To accomplish this purpose, the contents of general and antioxidative nutrients of Pueraria flos a were measured. The contents of carbohydrate, crude protein, crude lipid and ash were 69.2%, 19.9%, 2.2% and 8.9%, respectively, and calories was 340.4 kcal. Total dietary fiber was 85.1% of total carbohydrates. The percentages of water soluble dietary fiber to insoluble dietary fiber were 12.0% and 46.7%, respectively. The protein contained 18 different kinds of amino acids. The contents of essential and non-essential amino acids were 5.0 g and 6.7 g. The Ca was the largest mineral followed by K, Mg, and P, which means Pueraria flos is alkali material. The contents of saturated fatty acids, monounsaturated fatty acids and polyunsaturated fatty acids were 25.37%, 33.61% and 35.68%, respectively. Therefore, the amount of the total unsaturated fatty acid was higher than that of any other plant. The antioxidant activity of 70% ethanol extract and fractions of the Pueraria flos has been determined by the scavenging of the stable radical DPPH; the result showed that the ethyl acetate fraction was the most active, as the amount required for 50% reduction of DPPH after 30 mins ($RC_{50}$) was 109.9 ${\mu}g$, followed by 70% ethanol extract (217.3 ${\mu}g$), hexane fraction (134.5 ${\mu}g$), chloroform (116.7 ${\mu}g$), butanol faction (129.8 ${\mu}g$) and aqueous fraction (473.5 ${\mu}g$).

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.169-174
• /
• 1992

This experiment was carried out to investigate the possibility of practical use of intermittent soaking system(ISS) in hydroponicaly growing tomato. There were four treatments which were NFT, Aeroponics, and ISS with 10 and 15 minute soaking intervals. 1. Plant height is highest in NFT, but main root length is longest in ISS. While stem diameter and leaf number were not significantly difference. 2. Fresh and dry weight were heavier in NFT than those of other systems at early growth stage, but the heavier in ISS system, the growth more develop. 3. In 43 days after treatment, the number of flowerlet was largest in aeroponics, and then ISS and NFT in order. Fruit weight per plant was also heaviest in aeroponics. 4. Average yield per plant were 1929.1g in aeroponics, 1475.2g in ISS with 10 minute soaking interval, 1276.2g in NFT and 1084.8g in ISS with 15 minute soaking interval. 5. Average fruit number per plant were 11.0 in aeroponics, 9.7 in NFT, 8.3 in ISS with 15 minute soaking interval, and 7.7 in ISS with 10 minute soaking interval. Average fruit weight were 192.9g in aeroponics, 172.4g in ISS with 10 minute soaking interval, 134.0g in NFT and 126.0g in ISS with 15 minute soaking interval. 6. Average fruit length was longer in aeroponics and ISS with 10 minute soaking interval than in the NFT and ISS with 15 minute soaking interval. Average fruit width was similarly wider in NFT, aeroponics and ISS with 10 minute soaking interval than in ISS with 15 minute soaking interval.

• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.435-441
• /
• 1998

Optimal conditions for the production of natural color, betacyanin were investigated by varying light intensity, C/N ratio, concentrations of phosphate and kinds of elicitors. Batch cultivation was employed to characterize cell growth and betacyanin production of 32 days. The maximum specific growth rate, ${\mu}$$\sub$max/, was 0.3 (1/day) for batch cultivation. The maximum specific production rate, q$\^$max/$\sub$p/, was enhanced 0.11 (mg/g-cell/day) at 3 klux. A light intensity of 3 klux was shown to the best for both cell growth and betacyanin production. The maximum specific production rate was 0.125 (mg/g-cell/day) at 0.242 (1/day), the maximum specific growth rate. The dependence of specific growth rate on the light lintensity is fit to the photoinhibition model. The correlation between ${\mu}$ and q$\sub$p/ showed that the product formation parameters, ${\alpha}$ and ${\beta}$$\sub$p/ were 0.3756 (mg/cell) and 0.001 (mg/g-cell/day), respectively. The betacyanin production was partially cell growth related process, which is different from the production of a typical product in plant cell cultures. In C/N ratio experiment, high carbon concentration, 42.1 (w/w) improved cell growth rate while lower concentration, 31.6 (w/w) increased the betacyanin production rate. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.26 (1/day) and 0.075 (mg/g-cell/day), respectively. Beta vulgaris L. cells under 1.25 mM phosphate concentration produced 10.15 mg/L betacyanin with 13.46 (g-dry wt./L) of maximum cell density. The production of betacyanin was elongated by adding 0.1 ${\mu}$M of kinetin. This also increased the cell growth. Optimum culture conditions of light intensity, C/N, phosphate concentration were obtained as 5.5 klux, 27 (w/w), 1.25 mM, respectively by the response surface methodology. The maximum cell density, X$\sub$max/, and maximum production, P$\sub$max/, in optimized conditions were 16 (g-dry wt./L), 12.5 (mg/L) which were higher than 8 (g-dry wt./L), 4.48 (mg/L) in normal conditions. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.376 (1/day) and 0.134 (mg/g-cell/day) at the optimal condition. The overall results may be useful in scaling up hairy root cell culture system for commercial production of betacyanin.

• Food Engineering Progress
• /
• v.22 no.4
• /
• pp.315-320
• /
• 2018

This study examined the effects of drying methods of Aronia melanocarpa on contents of total polyphenols and flavonoids, antioxidant activity and anti-inflammatory activity. As a result, freeze-dried aronia extract (FDAE) significantly exhibited higher contents of total polyphenols and flavonoids (155.76 mg GAE/g and 105.70 mg QE/g) than hot-air dried aronia extract (HDAE) (134.93 mg GAE/g and 82.29 mg QE/g). Also, FDAE showed greater antioxidant activity than HDAE in both DPPH and ABTS. For anti-inflammatory activity, NO production from lipopolysaccharide activated RAW264.7 cell reduced at a dose-dependent manner in both FDAE and HDAE. However, reduction rate of NO production is higher in FDAE (62.7%) than in HDAE (33.5%). These results suggest that comparatively, freeze-drying is a better method for preserving the antioxidant and anti-inflammatory activities and of aronia.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.127-134
• /
• 2004

Control of drag force on a circular cylinder using multiple detached splitter plates is numerically studied for laminar flow Two splitter plates with the same length as the cylinder diameter (d) are placed horizontally in the upstream of the cylinder and in the near-wake region, respectively. Their positions are described by the gap ratios (G$_1$/d, G$_2$/d), where G$_1$ represents the gap between the cylinder stagnation point and the rear edge of the upstream splitter plate, and G$_2$ represents the gap between the cylinder base point and the leading edge of the rear splitter plate. The drag varies with the two gap ratios; it has the minimum value at a certain set of gap ratios for each Reynolds number The upstream splitter plate decreases the stagnation pressure, while the rear splitter plate increases the base pressure by suppressing vortex shedding. This combined effect causes a significant drag reduction on the cylinder Particularly, the drag sharply increases past an optimum G$_2$/d; this seems to be related to a sudden change in bubble size in the wake region.