• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2012

We propose a method for an indoor mobile robot to track user with infrared transmitter. Several infrared receivers attached around by the mobile robot enable the robot to determine the moving direction by comparing the received signal patterns. The cost of the proposed system is not only cheaper than ultrasonic system, image signal processing, RFID, and RSSI method, but also robust against environment change because any complex algorithm is not necessary. In the mobile robot, ultrasonic sensors are equipped to avoid obstacles located in the moving direction, and a simple algorithm is embedded to avoid the case of poor signal reception.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.67-68
• /
• 2006

In this paper, a new revolute cooperating robot arms with 12 d.o.f was developed for autonomous moving robots. The robot ann was designed to have the load capacity of 10 Kg. For this, a new joint actuator based on the fourbar link mechanism was employed. As a control system for the robot arm, a distributed control system was developed composed of the main controller and five motor controller for the ann joints. The main controller and the motor controller were developed using the ARM microprocessor and the TMS320c2407 processor, respectively. To validate the performance of the robot system, an experiment to support 10 Kg payload was performed.

• The Journal of Korea Robotics Society
• /
• v.10 no.4
• /
• pp.213-222
• /
• 2015

This paper presents a column-climbing robot with a mechanical manipulator, which can spirally go up and down a column using wheels. The developed robot can do useful works using the manipulator at the top of a column, e.g., electric pole while communicating wirelessly with an operator panel. It is driven using a battery without any power cables, and the average duration of power is at least one hour. The robot has a function to detect a work object using an optical sensor installed at the bottom of the manipulator. The spirally column-climbing robot developed is demonstrated by experimental works and also by showing it at an exhibition.

• Advances in robotics research
• /
• v.2 no.1
• /
• pp.99-112
• /
• 2018

The main contribution of this work is the design of a field programmable gate array (FPGA) based ARX-Laguerre proportional-integral observation (PIO) system for fault detection and identification (FDI) in a multi-input, multi-output (MIMO) nonlinear uncertain dynamical robot manipulators. An ARX-Laguerre method was used in this study to dynamic modeling the robot manipulator in the presence of uncertainty and disturbance. To address the challenges of robustness, fault detection, isolation, and estimation the proposed FPGA-based PI observer was applied to the ARX-Laguerre robot model. The effectiveness and accuracy of FPGA based ARX-Laguerre PIO was tested by first three degrees of the freedom PUMA robot manipulator, yielding 6.3%, 10.73%, and 4.23%, average performance improvement for three types of faults (e.g., actuator fault, sensor faults, and composite fault), respectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2021

We developed a pet care robot that can be controlled outdoors. Through the smartphone application, the pet owners can watch the situation in the house and manipulate the robot to make their pet happy. The video data in the house is transmitted to the application through the webcam installed at the house. The robot can not only perform user's command but also do six basic macro action. The obstacle avoidance function using the current sensor can be activated if the user want to use. When the robot hits to something, it moves back and rotates by arbitrary angle, and then moves forward.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.427-428
• /
• 2013

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.1-9
• /
• 1996

Although the fuzzy logic controller (FLC) has been adopted in many engineering applications, one hesitates to adopt the FLC in critical applications, since there was no definite control theoretic analysis. In this paper, based on the stability/robustness analysis of an FLC by S.Y.Yi$^{[3]}$, we apply the FLC to robot manipulator with the structured and unstructured uncertainties e.g., load variation and firction, etc. And we verify the performance of the FLC by computer simulation on a simple two-link robot manipulator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.317-318
• /
• 2011

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.773-776
• /
• 1995

Sliding Mode Controller is largely used to control holy nonlinear system such as robot manipulator. This paper simulate the SCARA robot with sliding mode control algorithm and its applied form with saturation term to reduce chattering. In addition, hardware system using DSP board which operates with high speed is constructed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.2015-2018
• /
• 2005

In this paper, we are willing to prepare the reasonable optimization, Combinatorial Optimization and Genetic Algorithm. Thus we define position status of end-effect (or terminative link module) using promised form, (G, M(G), A(G), and so on.). For this preparing step, the reorganizing procedure of Link and Joint Module is necessary, like as enumerating the kinematically identical assembly group of several links and joints. Thus, we draw a G, directed graph in a first step. Because, directed graph contains the path information between adjacent Link Module and Joint Module. From the directed graph,G, we can incite the Incidence Matrix, M(G). The incidence matrix, M(G), contains the contact information of the Link (Joint) Module and the type of Link (Joint). At the end of this paper, we generalize the modular information as a matrix form, A(G). From this matrix, we can make a population of assembly status. That is the finial output of this paper.