• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.120-125
• /
• 2007

Magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. Tn the present study, square cup deep drawing tests using the magnesium alloy AE31 sheet were experimentally conducted using the porches and dies with different edge radius to evaluate the formability sensitivity to the die design variables. The experimental results showed that the fracture position over the cup wall moved from the punch nose to the flange as the die temperature increased, and that the drawing depth change was more affected by the punch radius than the die radius.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.627-628
• /
• 2008

본 논문에서는 수직 자계를 이용한 배관 내 자성체를 측정하는 시스템을 개발하였다. 자성체 면적 변화에 따른 측정 신호의 정밀도를 높이기 위해 배관 내 자기장의 크기 및 균일도를 고려한 설계 및 해석을 하였다. 인가 자기장의 크기는 반도체 소자의 노이즈 레벨($0.4{\sim}0.6$[G])보다 크고, 대상물체의 1% 면적 변화에 따른 ${\Delta}B$의 민감도를 고려하였으며, 코어의 형상 및 길이를 변화에 따른 배관 내 자기장의 크기와 균일도를 유한요소법을 이용하여 해석하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.271-276
• /
• 2000

본 논문은 칼라 성분들간의 차분 영상과 휘도 영상을 이용하여 산출한 색차 휘도합 영상을 대상으로 블록에 기반한 영상 분할을 수행하여 객체의 형상 정보를 추출함으로써 분할 특성을 개선한 블록 기반 칼라 영상 분할 기법에 관한 것이다. 우선, R, G, B 영상들 간의 차분 성분들을 구하여 합산한 후, 이를 정규화하여 색차합 영상을 구한다. 다음으로 화소 단위로 휘도 영상의 상위 2비트와 정하화된 색차합 영상의 하위 6비트를 결합하여 색차 휘도합 영상을 얻는다. 이후, 기설정된 크기의 블록으로 분할된 색차 휘도합 영상의 각 블록을 질감 블록과 단순 블록 및 에지 블록으로 분류하고 각 유형의 블록별로 병합한 후, 기설정된 마커 배정 규칙에 따라 선택적으로 마커를 부여한다. 마지막으로, 마커가 부여되지 않은 블록을 대상으로 화소 단위의 워터쉐드 알고리즘을 적용함으로써 자연스러운 형상 정보를 얻을 수 있다. 컴퓨터 시뮬레이션 결과를 통해 고찰할 때, 제안된 방범은 질감 영역에서의 과분할의 문제와 과도한 연산량의 부담을 효과적으로 경감시킬 수 있으나, 더불어, 영상 분할용 파라미터들의 민감도가 낮아 서로 다른 화소 분포 특성온 갖는 영상들에 전역적인 파라미터들사용할 수 있을 뿐만 아니라 특히, 색차 휘도합 영상에 반영된 색차 성분에 힘입어 저대조 경계면에서의 분할 특성을 현저히 개선시킬 수 있는 이점이 있다.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.3
• /
• pp.215-220
• /
• 1999

Rotary bending fatigue tests were carried out to investigate the artificial defect sensitivity of fatigue limit in annealed and austempered ductile irons. Artificial defect(hole, diameter${\leq}0.4mm$) machined on specimen surface did not bring about an obvious reduction of fatigue limit in austempered ductile iron as compared with annealed. As a result of investigation on $\sqrt{area}$ c which is the critical artificial defect size. $\sqrt{area}$ c of austempered ductile iron is larger than that of annealed. This means that the crack initiation at artificial defect in austempered ductile iron is more difficult in comparison with annealed. In case that the $\sqrt{area}$ c of artificial defect and graphite nodule are same, the rate of crack initiation for graphite nodule is higher than that of artificial defect.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.806-811
• /
• 1998

핵연료 피복관의 산화반응 현상은 중대사고시 원자로와 격납건물의 건전성을 위협하는 중요한 원인중의 하나이다 본 논문에서는 MELCOR에서 사용증인 Urbanic-Heidrich 상관식과 SCDAP/RELAP5/MOD3.1에서 사용중인 MATPRO-EG&G 상관식을 사용하여 산화 반응 모델이 노심손상에 미치는 영향을 울진원전3,4호기를 대상으로 MELCOR의 입력변수의 변화에 따른 민감도를 분석하였다. 분석결과, Urbanic-Heidrich 상관식이 MATPRO-EG&G상관식에 비해 핵연료 용융시작을 약 394초, 원자로 노심 하부에서의 용융물 재배치 (relocation)시작을 약 434초 가량 빨리 초래하여 사고진행에는 큰영향이 없음을 나타내고 있으나 노심하부 파손시점까지 발생한 수소량은 Urbanic-Heidrich 상관식이 MATPRO-EG&G상관식에 비해 약 1.4배정도 더 많이 발생시켜 격납건물 건전성에 대한 영향이 매우 크므로 보다 자세한 모델검토가 요구된다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.820-826
• /
• 2008

Differ number of seismograph to the composition dam by recently frequent earthquake and analyzed responsiveness. Interest for dam inner place by increase of something wrong flood and inside and outside of the country earthquake appearance according to unusual change of weather is risen, on important urea in dam safety floodgate school register by structural safety divide can. Therefore, by PMP (PMF) of dam and increase of domestic earthquake occurrence, need research about earthquake resistant nature ability estimation of water resources facilities. Because responsiveness analysis applies number 0.154 ~ 0.25 g of seismograph, seismic wave that use in analysis is being suitable in dynamic analysis of construction such as Rockfill dam from representative chapter cycle faction and recommend in domestic internal examination design workbook, and use results applied much Hachinohe wave onions in van abroad.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.464-469
• /
• 2005

Optimum sensitivity analysis (OSA) is the process to find the sensitivity of optimum solution with respect to the parameter in the optimization problem. The prevalent OSA methods calculate the optimum sensitivity as a post-processing. In this research, a simple technique is proposed to obtain optimum sensitivity as a result of the original optimization problem, provided that the optimum sensitivity of objective function is required. The parameters are considered as additional design variables in the original optimization problem. And then, it is endowed with equality constraints to penalize the additional variables. When the optimization problem is solved, the optimum sensitivity of objective function is simultaneously obtained as Lagrange multiplier. Several mathematical and engineering examples are solved to show the applicability and efficiency of the method compared to other OSA ones.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.213-214
• /
• 2018

본 논문에서는 전기자동차 온-보드 충전기용 단상 cycloconverter-type high frequency link 컨버터의 전력 제어성능과 동적 응답특성을 개선하기 위하여 예측전류제어 기법을 적용한다. 배터리를 충전 및 방전하기 위하여 전력계통에 연결되는 V2G 충전기는 전압 변동, 고조파 왜곡 등의 외란 발생에도 강인한 동적 응답 특성을 유지하여야 한다. 예측전류제어 기법이 적용된 제어기는 계통 외란이 존재하는 경우에도 전력 레퍼런스를 빠르게 추적하고 정확한 듀티를 생성할 수 있으므로 우수한 동적 및 과도 응답특성을 갖는다. 제안하는 제어기의 성능과 파라미터 변동에 대한 민감도는 PSIM 시뮬레이션을 이용하여 평가되며, 여러 계통외란 상태에서 PI 제어기와 비교된다.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.785-799
• /
• 2022

The aim of this study was to characterize the emission pathways and the footprint of greenhouse gases (GHG) in Daecheong Reservoir using the G-res Tool, and to evaluate the GHG emission intensity (EI) compared to other energy sources. In addition, the change in GHG emissions was assessed in response to the total phosphorus (TP) concentration. The GHG flux in post-impoundment was found to be 262 gCO₂eq/m²/yr, of which CO₂ and CH₄ were 45.7% and 54.2%, respectively. Diffusion of CO₂ contributed the most, followed by diffusion, degassing, and bubbling of CH₄. The net GHG flux increased to 510 gCO₂eq/m²/yr because the forest (as CO₂ sink) was lost after dam construction. The EI of Daecheong Reservoir was 86.8 gCO₂eq/kWh, which is 3.7 times higher than the global EI of hydroelectric power, due to its low power density. However, it was remarkable to highlight the value to be 9.5 times less than that of coal, a fossil fuel. We also found that a decrease in TP concentration in the reservoir leads to a decrease in GHG emissions. The results can be used to improve understanding of the GHG emission characteristics and to reduce uncertainty of the national GHG inventory of dam reservoirs.

• Clinical and Experimental Pediatrics
• /
• v.45 no.6
• /
• pp.700-711
• /
• 2002

Purpose : Early identification and treatment of developmental disabilities is of considerable importance in the health care of children. Screening of development is aimed at identifying infants who may need more comprehensive evaluations. Methods : A new test, the Ewha Infant Development Screening Test(EDST) has been created to screen the development of infants, 0-4 years of age. EDST was constructed so that results can be calculated into developmental ages and developmental quotients. The test consists of three sectors, e.g. language, social-adaptive and motor, and of 158 test items. A total of 104 infants, aged from one month to four years, including healthy infants as well as 10 with chief complaints of developmental delay, who visited the pediatric clinic of Ewha Womans University Dongdaemun Hospital, from June, 25 to November 30, 2001, were given the Bayley Scale of Infant Development as a base test and EDST. Results : The result showed the appropriate cut-off of EDST was 90 with better sensitivity and specificity, compared to cut-offs of 85 or 80. Conclusion : Further study with a large number of infants in the future is needed to make EDST more reliable and accurate.