• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.927-934
• /
• 2012

This paper suggests a new fuzzy PID controller with variable parameters which improves the shortage of the fuzzy PID controller with fixed parameters suggested in [9]. The derivation procedure follows the general design procedure of the fuzzy logic controller, while the resultant control law is the form of the conventional PID controller. Therefore, the suggested controller has two advantages. One is that it has only four fuzzy linguistic rules and analytical form of control laws so that the real-time control system can be implemented based on low-price microprocessors. The other is that the PID control action can always be achieved with time-varying PID controller gains only by adjusting the input and output scalers at each sampling time.

• 융합신호처리학회논문지
• /
• 제6권2호
• /
• pp.89-94
• /
• 2005

본 논문에서는 새로운 방법의 Fuzzy PID 제어기를 제안한다. 우선 절대형 디지털 PID 제어기에서 두 가지 문제점이 있다. 첫째는 매 제어 주기마다 많은 데이터의 합을 구해야 하므로 계산시간이 많이 소요되고, 둘째는 이 계산을 위해 이전의 모든 데이터를 보관하고 있어야 되기 때문에 메모리가 많이 필요한 문제점이 있다. 위의 문제점을 개선하기 위해 속도형 디지털 PID 제어기를 사용한다. 제안한 제어기에서는 PID 제어기의 목표 값과 현재 출력 값의 차인 크리스퍼(crisp) 출력 오차를 그대로 사용하지 않고 퍼지추론의 단계는 가지면서 Rule Table은 갖지 않는 특징이 있으며 출력 소속 함수에 두 변수의 관계와 범위에 의해 도식화된 영역에서 삼각형 무게 중심법으로 비퍼지화된 비선형 출력 값을 PID 계수에 인가하는 새로운 Fuzzy PID 제어기를 제안한다.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.603-610
• /
• 1998

본 논문은 차량의 엔진을 컴퓨터를 이용하여 모델링하고, 이를 본 논문에서 설계한 Fuzzy-PID 제어기로 성능을 평가하는 것으로서, 차량의 정속주행 특성을 Fuzzy-PID제어기를 이용하여 시뮬레이션 한다. 차량의 엔진모델은 MATLAB-Simulink를 이용하여 설계하고, PID의 각 파라메터값은 Fuzzy 제어기를 이용하여 자동 추정하는 형태로 구성한다. 차량의 시뮬레이션은 직선주로상에서 이루어지고, 이를 퍼지 제어기, 그리고 PID 제어기와 비교 분석해 보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.352-354
• /
• 2004

In this paper, a parallel fuzzy controller for one degree of freedom magnetic levitation is designed and its performance is compared with the performance of a PID controller. Input, output scaling factor of fuzzy controller and gain of PID controller were tuned using the GA algorithm. The designed controllers are validated by numerical simulations. So it's shown that parallel fuzzy controller can give the better performance for the plant than PID controller.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.403-410
• /
• 1999

PID 제어기는 미지의 Deadzone을 가진 시스템에 적용될 때, 제어 성능이 저하되는 단점을 나타낼 수 있다. 이러한 문제를 해결하기 위하여, 본 논문에서는 2층 구조의 퍼지 논리를 이용한 PID 제어기를 제안하였다. 이 제어기의 구조는 전형적인 PID 제어기에 퍼지 보상기와 퍼지 동조기를 추가하여 구성하였다. 제안된 제어 방법은 전형적인 PID 제어기에 비하여 뛰어난 과도응답과 정상상태 성능을 나타낸다. 이 방법이 플랜트의 정상상태 이득뿐만 아니라 Deadzone 비선형성에서도 강인하다. 제안된 제어기의 성능은 시뮬레이션을 통하여 검증하였다

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.69-69
• /
• 2000

Control systems using a hydraulic cylinder as an actuator are modeled to a nonlinear system owing to varying of moments and nonlinearities of hydraulic itself. In this paper, we want to control nonlinear hydraulic systems by adopting the fuzzy PID control technique which include nonlinear time varying control parameters. To do this, we propose the design method of fuzzy Pm controller and in order to assure effectiveness of fuzzy PID controller, computer simulations were executed for the control system.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.303-311
• /
• 2012

In this study, we introduce a dynamic process model as well as the design methodology of optimized fuzzy controller for its efficient application to vacuum production system to produce a semiconductor, solar module and display and so on. In a vacuum control field, PID control method is widely used from the viewpoint of simple structure and preferred performance. But, PID control method is very sensitive to the change of environment of control system as well as the change of control parameters. Therefore, it's difficult to get a preferred performance results from target system which has a complicated structure and lots of nonlinear factors. To solve such problem, we propose the design methodology of an optimized fuzzy PID controller through a following series of steps. First a dynamic characteristic of the target system is analyzed through a series of experiments. Second the process model is built up and its characteristic is compared with real process. Third, the optimized fuzzy PID controller is designed using genetic algorithms. Finally, the fuzzy controller is applied to target system and then its performance is compared with that of other conventional controllers(PID, PI, and Fuzzy PI controller). The performance of the proposed fuzzy controller is evaluated in terms of auto-tuned control parameters and output responses considered by ITAE index, overshoot, rise time and steady state time.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권2호
• /
• pp.55-61
• /
• 2000

In this paper, we proposed a new PID tuning algorithm by the fuzzy set theory to improve the performance of the PID controller. The new tuning algorithm for the PID controller has the initial value of parameter Kc, $\tau$I, $\tau$D by the Ziegler-Nichols formula using the ultimate gain and ultimate period from a relay tuning experiment. We get error and error change of plant output correspond to the initial value and new proportion gain(Kc) and integral time($\tau$I) from fuzzy tunner. This fuzzy tuning algorithm for PID controller considerably reduced overshoot and rise time compare to any other PID controller tuning algorithms. In real parametric uncertainty systems, the PID controller with Fuzzy auto-tuning give appreciable improvement in the performance. The significant properties of this algorithm is shown by simulation In this paper, we proposed a new PID algorithm by the fuzzy set theory to improve the performance of the PID controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 추계학술대회 학술발표 논문집 제14권 제2호
• /
• pp.217-220
• /
• 2004

Controller that is designed in this paper is form that apply PID controller about Fuzzy algorithm. Fuzzy Controller that using this paper is can speak that compensation style fuzzy controller as form to solidify action of PID controller for plant. This is not form that autotuning the each PID coefficient. We Apply and examined the response character to AGC(Automatic Generation Control) system using designed controller.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.969-980
• /
• 2018

This paper aims to design of the neutrosophic fuzzy-PID controller and it has been compared with the conventional fuzzy-PID controller for position tracking control in terms of robustness. In the neutrosophic fuzzy-PID controller, error (e) and change of error (ce) were assessed separately on two fuzzy inference systems (FISs). In this study, the designed method is different from the conventional fuzzy logic controller design, membership degrees of antecedent variables were determined by using the T(true), I(indeterminacy), and F(false) membership functions. These membership functions are grouped on the universe of discourse with the neutrosophic set approach. These methods were tested on three-dimensional (3-D) position-tracking control application of a spherical robot manipulator in the MATLAB Simulink. In all tests, reference trajectory was defined for movements of all axes of the robot manipulator. According to the results of the study, when the moment of inertia of the rotor is changed, less overshoot ratio and less oscillation are obtained in the neutrosophic fuzzy-PID controller. Thus, our suggested method is seen to be more robust than the fuzzy-PID controllers.