• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.87-92
• /
• 1997

본 논문은 저비용이면서 정확한 제어를 수행하는 새로운 퍼지 제어기의 VHDL 설계 및 시뮬레이션을 다룬다. 제안한 퍼지 제어기 (Fuzzy Logic Controller : FLC)의 정확한 비퍼지화 연산시 소속값뿐 아니라 소속 함수의 폭을 고려함으로서 ？어진다. 제안한 퍼지 제어기 저비용성은 기존의 FLC를 다음과 같이 개조함으로서 이루어진다. 먼저, MAX-MIN 추론이 레지스터 파일의 형태로 쉽게 구현 가능한 read-modify-write 연산에 의해 대치된다. 두 번째, COG 비퍼지화기에서 요구하는 제산 연산을 모멘트 균형점의 탐색에 의해 피할 수 있다. 제안한 COG 퍼지화기는 곱셈기가 부가적으로 요구되며 모멘트 균형점의 탐색 시간이 오래 걸리는 단점이 있다. 부가적 곱셈기 요구에 의한 하드웨어 복잡도 증가 문제는 곱셈기를 확률론적 AND 연산에 의해 해결할 수 있고, 오랜 탐색 시간 문제는 coarse-to fine 탐색 알고리즘에 의해 크게 경감될 수 있다. 제안한 퍼지 제어기의 각 모듈은 VHDL에 의해 구조적 수준 및 행위적 수준에서 기술되고, 이들이 제대로 동작하는지 여부를 SYNOPSYS사의 VHDL 시뮬레이션 상에서 트럭 후진 주차 문제에 적용하여 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.105-108
• /
• 1997

We developed a FLC(Fuzzy Logic Controller) for tracking control of MR(Mobile Robot) with obstacle avoidance. In this research, we made a heuristic approach to tracking control which is simple and efficient in almost every situation using FLC. In addition, smooth turn is accomplished and also obstacles are avoided. Also we used the XX(don't care) linguistic variable for inputs in FLC to make simple rule-table. With various simulations, the validity of our FLC was shown.

• 한국지능시스템학회논문지
• /
• 제5권1호
• /
• pp.25-32
• /
• 1995

In this paper, the FLVSC (Fuzzy Logic Variable Structure controller), of which control rules are extracted from the concepts of the VSC(Variable Structure control) is proposed and diesgned for drum motor(BLDC motor) in home VCR. The FLC (Fuzzy Logic Controller) based on linguistic rules has the advantages of not needing of some exact mathermatical model for plant to be controlled. The proposed method has the characteristics which are viewed in conventional VSC, e.g. insensitivity to a class of distrubances, parameter variations and uncertainites in a sliding mode. In addition, the method has the properties of the FLC-noise rejection capability etc. The computer simulation and experiment using DSP(TMS320C30) have been carried out for the servo control of VCR drum motor to show the usefulness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.373-375
• /
• 2004

The SRM is more robust and lower cost than other type motors. The inverter for SRM cannot have shoot through fault, since a phase winding of SRM is independent of other phase windings. The SRM has high starting torque and high power density. But it has torque ripples due to nonlinear magnetic characteristics. Therefore, SRM has highly non-linear torque producing characteristics. Because fuzzy logic is a flexible and general-purposed method for implementing non-linear dynamic functions, it is effective for the control of high current SRM. We design the fuzzy controller and demonstrate the fuzzy control system by MATLAB.

• 조명전기설비학회논문지
• /
• 제20권3호
• /
• pp.53-61
• /
• 2006

본 논문은 유도전동기 드라이브의 고성능 제어를 위한 적응 퍼지-뉴로 제어기를 제시한다. 이 알고리즘의 설계는 퍼지제어와 신경회로망을 사용하는 퍼지-신경회로망 제어기에 기초한다. 적응 퍼지-뉴로 제어기는 신경회로망의 학습패턴과 같은 퍼지 룰을 사용하고 또한 지령값과 실제값 사이의 오차를 최소화하기 위하여 신경회로망의 뉴런사이의 하중을 역전파 알고리즘 방법을 사용하여 조절한다. 적응 기준 모델 설계는 기준모델의 출력과 전동기 속도 사이의 오차와 오차 변화분을 기초로 한 퍼지 로직에 의하여 실행되는 적응 메카니즘을 제시한다. 적응 퍼지-뉴로 제어기의 제어 성능은 다양한 동작 상태에 대한 분석으로 평가한다. 제안한 제어시스템의 실험 결과는 고성능과 파리미터 변동과 정상상태 정확성, 순시응답의 강인성을 가진다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1293-1302
• /
• 1999

In this paper, an on-line process scheme is presented for implementation of a intelligent on-line modeling of nonlinear complex system. The proposed on-line process scheme is composed of FNN-based model algorithm and PLC-based simulator, Here, an adaptive fuzzy-neural networks and HCM(Hard C-Means) clustering method are used as an intelligent identification algorithm for on-line modeling. The adaptive fuzzy-neural networks consists of two distinct modifiable sturctures such as the premise and the consequence part. The parameters of two structures are adapted by a combined hybrid learning algorithm of gradient decent method and least square method. Also we design an interface S/W between PLC(Proguammable Logic Controller) and main PC computer, and construct a monitoring and control simulator for real process system. Accordingly the on-line identification algorithm and interface S/W are used to obtain the on-line FNN model structure and to accomplish the on-line modeling. And using some I/O data gathered partly in the field(plant), computer simulation is carried out to evaluate the performance of FNN model structure generated by the on-line identification algorithm. This simulation results show that the proposed technique can produce the optimal fuzzy model with higher accuracy and feasibility than other works achieved previously.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.123-126
• /
• 1998

The theoretical foundations of GA are the Schema Theorem and the Building Block Hypothesis. In the Meaning of these foundational concepts, simple genetic algorithm(SGA) allocate more trials to the schemata whose average fitness remains above average. Although SGA does well in many applications as an optimization method, still it does not guarantee the convergence of a global optimum. Therefore as an alternative scheme, there is a growing interest in a co-evolutionary system, where two populations constantly interact and co-evolve in contrast with traditional single population evolutionary algorithms. In this paper, we propose a new design method of an optimal fuzzy logic controller using co-evolutionary concept. In general, it is very difficult to find optimal fuzzy rules by experience when the input and/or output variables are going to increase. So we propose a co-evolutionary method finding optimal fuzzy rules. Our algorithm is that after constructing two population groups m de up of rule vase and its schema, by co-evolving these two populations, we find optimal fuzzy logic controller. By applying the proposed method to a path planning problem of autonomous mobile robots when moving objects exist, we show the validity of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.176.1-176
• /
• 2001

Conventional researches almost have been focused on the one dimensional inverted pendulum. Recently, Sprenger et al[2] have researched a two dimensional inverted pendulum Observing human's action to control an inverted pendulum, one can recognize that human uses a three dimensional metier including the up and down motion. In this paper, we propose a fuzzy logic controller(FLC) of a new three dimensional inverted pendulum system. We derive a dynamic equation of the mechanism including a 3-axis cartesian robot and a inverted pendulum. We propose a design method of a fuzzy controller of the yaw and pitch angles of a inverted pendulum. In the design, the redundant degree-of-freedom(DOF) of the robot ...

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.448-451
• /
• 2000

Fuzzy control has been researched for application of industrial processes which have no accurate mathematical model and could not controlled by conventional methods because of a lack of quantitative input-output data. Intelligent control approach based on fuzzy logic could directly reflex human thinking and natural language to controller comparing with conventional methods. In this paper, the tested system is constructed for sending a ball to the goal position using wind from two DC motors in the path. This system contains non-linearity and uncertainty because of the characteristic of aerodynamics inside the path. The system used in this experiment could be hardly modeled by mathematic methods and could not be easily controlled by linear control manners. The controller, in this paper could control the system containing non-linearity and uncertainty because it is designed based on the input-output data and experimental knowledge obtained by trials.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.436-440
• /
• 1992

As an approach to design the intelligent controller, this paper proposes a new FNN(Fuzzy Neural Network) control method using the hybrid combination of fuzzy logic control and neural network. The proposed FNN controller has two important capabilities, namely, adaptation and learning. These functions are performed by the following process. Firstly, identification of the parameters and estimation of the states for the unknown plant are achieved by the MNN(Model Neural Network) which is continuously trained on-line. And secondly, the learning is performed by FNN controller. The error back propagation algorithm is adopted as a learning technique. The effectiveness of the proposed method will be demonstrated by computer simulation of a two d.o.f. robot manipulator.