• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.111-118
• /
• 1995

This paper presents the modified fuzzy-compensated PID(FCPID) control, which involves adding the compensator to an existing PID controller, to improve the performances of the systems. Compared to a conventional PID control and a fuzzy logic control(FLC), the proposed control scheme has superior performance. Experimental results of an actual implementation of the modified PC-based FCPID controller on the DC servo-motor demonstrate considerable improve- ment of the performance of the existing FCPID control by monitoring the scaling factor. They show faster responses and smaller overshoots than the conventional FCPID control scheme for the various reference inputs and the robustness to the loads.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.403-410
• /
• 1999

PID 제어기는 미지의 Deadzone을 가진 시스템에 적용될 때, 제어 성능이 저하되는 단점을 나타낼 수 있다. 이러한 문제를 해결하기 위하여, 본 논문에서는 2층 구조의 퍼지 논리를 이용한 PID 제어기를 제안하였다. 이 제어기의 구조는 전형적인 PID 제어기에 퍼지 보상기와 퍼지 동조기를 추가하여 구성하였다. 제안된 제어 방법은 전형적인 PID 제어기에 비하여 뛰어난 과도응답과 정상상태 성능을 나타낸다. 이 방법이 플랜트의 정상상태 이득뿐만 아니라 Deadzone 비선형성에서도 강인하다. 제안된 제어기의 성능은 시뮬레이션을 통하여 검증하였다

• 전기학회논문지
• /
• 제66권4호
• /
• pp.701-708
• /
• 2017

This paper proposes an optimum design method using Teaching-Learning-based optimization for the fuzzy PID controller of Magnetic levitation rail-guided vehicle. Since an attraction-type levitation system is intrinsically unstable, it is difficult to completely satisfy the desired performance through the conventional control methods. In the paper, a fuzzy PID controller with fixed parameters is applied and then the optimum parameters of fuzzy PID controller are selected by Teaching-Learning optimization. For the fitness function of Teaching-Learning optimization, the performance index of PID controller is used. To verify the performances of the proposed method, we use a Maglev model and compare the proposed method with the performance of PID controller. The simulation results show that the proposed method is more effective than conventional PID controller.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권1호
• /
• pp.22-30
• /
• 2001

This paper describes a neural network based fuzzy PID control scheme. The PID controller is being widely used in industrial applications. However, it is difficult to determine the appropriated PID gains in nonlinear systems and systems with long time delay and so on. In this paper, we re-analyzed the fuzzy controller as conventional PID controller structure, and proposed a neural network based self tuning fuzzy PID controller of which output gains were adjusted automatically. The tuning parameters of the proposed controller were determined on the basis of the conventional PID controller parameters tuning methods. Then they were adjusted by using proposed neural network learning algorithm. Proposed controller was simple in structure and computational burden was small so that on-line adaptation was easy to apply to. The experiment on the magnetic levitation system, which is known to be heavily nonlinear, showed the proposed controller's excellent performance.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.30-37
• /
• 2004

This thesis develops a fuzzy-PID control algorithm for control the filament winding tension. It is developed by applying classical PID control technique to a fuzzy logic controller. It is composed of a fuzzy-PI controller and a fuzzy-D controller. The fuzzy-PI controller uses error and integrated error as inputs, and the fuzzy-D controller uses derivative of error as input. The fuzzy-PI controller uses Takagi-Sugeno fuzzy inference system, and the fuzzy-D controller uses Mamdani fuzzy inference system. The fuzzy rule base for the fuzzy-PI controller is designed using 19 rules, and the fuzzy rule base for the fuzzy-D controller is designed using 5 rules. A test-bed is set-up for verifying the effectiveness of the developing control algorithm in control the filament winding tension. It is composed of a mandrel, a carriage, a force sensor, a driving roller, nip rollers, a creel, and a real-time control system. Nip rollers apply a vertical force to a filament, and the driving roller drives it. The real-time control system is developed by using MATLAB/xPC Target. First, experiments for showing the inherent problems of an open-loop control scheme in a filament winding are performed. Then, experiments for showing the robustness of the developing fuzzy-PID control algorithm are performed under various working conditions occurring in a filament winding such as mandrel rotating speed change, carriage traversing, spool radius change, and reference input change.

• 전자공학회논문지SC
• /
• 제40권1호
• /
• pp.1-10
• /
• 2003

본 논문에서는 외팔보 시스템의 능동 진동 제어를 위하여 퍼지 기법으로 동조한 PID 제어기 설계기법을 제시하였다. 직접 제작된 전자석은 작동기로 사용되었으며, 레이져 감지기가 보의 굽힘 변위를 측정하는데 사용되었다. 작동기와 감지기의 물리적 제한 때문에 실험 시스템이 비동위치(Noncollocated) 형태가 되었으며 비접촉식 제어 시스템을 이룬다 시스템의 모델링은 자유진동 방정식에 의한 모달 해석 방법으로 구하였으며 작동기로부터 감지기까지의 전달함수는 전자석 자동기차 보의 역학 방정식을 조합하여 구하였다. 일반적으로 PID 제어기는 산업 현장에서 널리 사용되고 있으나, 비선형성이 강한 시스템이나 시변 특성을 갖는 시스템에서 적절한 PID 이득값을 결정하는 것은 어렵다. 이에 본 논문에서는 자동적으로 PID 이득 값을 조절하는 퍼지 기법으로 동조한 PID 제어기를 설계하여 비선형성이 강한 전자석을 작동기로 사용하는 외팔보 시스템의 진동 제어에 적용하였다. 시뮬레이션과 실험적 결과를 통하여 설계된 제어기의 진동 감쇠 효과와 성능을 검증하였으며, PID 제어기의 경우와 비교하여 더 나은 진동 제어 성능을 가짐을 실험적 결과로부터 증명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권6호
• /
• pp.638-645
• /
• 2002

This paper presents a scheme for integrating PID control, gain scheduling and emerging techniques in the field of artificial intelligence, such as fuzzy logic and genetic algorithms for the speed control of a marine diesel engine. At first, local PID controllers are designed based on a local model obtained at each speed mode, whose parameters are optimally tuned using a real-coded genetic algorithm. Then, fuzzy "if-then" rules combine the local controllers as a consequence part to implement fuzzy gain scheduling. To demonstrate the performance of the proposed fuzzy PID controller on overall operating conditions, a set of simulation works on B'||'&'||'W's 4L80MC diesel engine are carried out.t.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권2호
• /
• pp.55-61
• /
• 2000

In this paper, we proposed a new PID tuning algorithm by the fuzzy set theory to improve the performance of the PID controller. The new tuning algorithm for the PID controller has the initial value of parameter Kc, $\tau$I, $\tau$D by the Ziegler-Nichols formula using the ultimate gain and ultimate period from a relay tuning experiment. We get error and error change of plant output correspond to the initial value and new proportion gain(Kc) and integral time($\tau$I) from fuzzy tunner. This fuzzy tuning algorithm for PID controller considerably reduced overshoot and rise time compare to any other PID controller tuning algorithms. In real parametric uncertainty systems, the PID controller with Fuzzy auto-tuning give appreciable improvement in the performance. The significant properties of this algorithm is shown by simulation In this paper, we proposed a new PID algorithm by the fuzzy set theory to improve the performance of the PID controller.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권1호
• /
• pp.63-66
• /
• 1995

PDI 제어기는 많은 서보 제어 시스템에 사용되고 있다. 하지만 제어 시스템이 가변부하일 경우에 정밀한 제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로, 본 논문에서는 가변부하일 경우 퍼지 규칙에 의해 PID 제어기의 매개변수를 자동 동조하는 방법을 제시하였다. PID 제어기의 매개변수는 부하 변화에 따라 퍼지 규칙에 의해 결정된다. 퍼지 자동 동조에 의한 정밀한 제어 기능은 모의실험에 의해 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.