• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.53-59
• /
• 2015

This paper proposes a novel method for acoustically and wirelessly transmitting data underwater with a high transmission rate. The method uses the most promising physical layer and multiple access technique (i.e., the code division multiple channel access technique) to divide the channel into subchannels. Data is transmitted through these subchannels. The codes are pseudo-random noise (PN) sequences. In the spread-spectrum technique, a signal such as electrical, electromagnetic, acoustic signal generated in a particular bandwidth is deliberately spread in the frequency domain, which results in a signal with a wider bandwidth. This paper reviews the possibility of application of the direct-sequence code division multiple access (DS-CDMA) technique in an underwater system using MATLAB. As the result of our review, we recognize that the DS-CDMA technique can be applied to underwater environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.419-423
• /
• 2008

사람의 손동작은 오랫동안 하나의 언어역할을 하는 통신 수단으로 사용되어 왔다. 이러한 손동작 중에서 가장 체계를 갖춘 수화는 청각장애인이 일반인과 일상 대화를 할 수 있도록 도와주는 주요한 통신 수단이다. 하지만 건청인들의 대부분이 습득하고 있지 않아 청각장애인들과 의사소통이 거의 불가능 한 것이 현실이다. 따라서 본 논문에서는 건청인과 청각장애인들 간의 의사소통을 원활하게 하기 위해 색상 정보와 퍼지 클러스터링 알고리즘을 이용한 실시간 수화 인식 방법을 제안한다. 제안된 방법은 화상 카메라를 통해 얻어진 실시간 영상에서 YCbCr 컬러 공간에서 색차 정보에 해당하는 Cb, Cr 정보를 각각 추출한 후, 이진화한 영상과 원본 영상에서 마스크를 통한 에지를 추출한 이진화 영상에 대해 논리연산을 통해 두 손의 위치와 외곽을 추출한다. 추출된 각 정보를 조합하여 8 방향 윤곽선 추적 알고리즘을 적용하여 객체의 위치를 추적한다. 그리고 추적한 객체의 영역에 대해 형태학적 정보를 이용하여 잡음을 제거한 후, 최종적으로 두 손의 영역을 추출한다. 추출된 손의 영역은 퍼지 클러스터링 기법 중의 FCM 알고리즘을 적용하여 수화의 특징들을 분류하고 인식한다. 제안된 방법의 성능을 평가하기 위해 화상카메라를 통해 얻어진 실시간 영상을 대상으로 실험한 결과, 제안된 방법이 두 손 영역의 추출에 효과적이고 수화 인식에 있어서 가능성을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.186-188
• /
• 2021

본 논문에서는 초음파 영상에서 DBSCAN(Density-based spatial clustering of applications with noise)과 FCM 클러스터링 기반 양자화 기법을 적용하여 결절종을 추출하는 방법을 제안한다. 본 논문에서는 초음파 영상 촬영 시 좌우 상단의 지방층 영역과 하단 영역의 명암도가 어두운 영역을 잡음 영역으로 설정한다. 그리고 초음파 영상에 퍼지스트레칭 기법을 적용하여 잡음 영역을 최대한 제거 한 후에 ROI 영역을 추출한다. 추출된 ROI 영역에서 밀도 분포를 분석하기 위하여 히스토그램을 분석한 후에 DBSCAN을 적용하여 초음파 영상에서 결절종 후보에 해당되는 명암도를 추출한다. 추출한 후보 명암도를 대상으로 FCM 클러스터링 기법을 적용한다. FCM을 적용하는 단계에서 결절종의 저에코 혹은 무에코의 특징을 이용하여 클러스터 중심 값이 가장 낮은 클러스터를 양자화 한 후에 라벨링 기법을 적용시켜 결절종의 후보 객체를 추출한다. 제안된 결절종 추출 방법의 성능을 분석하기 위해 전문의가 결절종 영역을 표기한 초음파 영상과 표기되지 않은 초음파 영상 120쌍을 대상으로 DBSCAN, FCM, 그리고 제안된 방법 간의 성능을 비교 분석하였다. 제안된 방법에서는 120개의 초음파 영상에서 106개 결절종 영역이 추출되었고 FCM 기법에서는 80개가 추출되었고 DBSCAN에서는 36개가 추출되었다. 따라서 제안된 방법이 결절종 추출에 효율적인 것을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.46 no.8
• /
• pp.857-871
• /
• 2013

The interest in rainfall observation and forecasting using remote sensing method like RADAR (Radio Detection and Ranging) and satellite image is increased according to increased damage by rapid weather change like regional torrential rain and flash flood. In this study, the basin runoff was calculated using adaptive neuro-fuzzy technique, one of the data driven model and MAPLE (McGill Algorithm for Precipitation Nowcasting by Lagrangian Extrapolation) forecasted precipitation data as one of the input variables. The flood estimation method using neuro-fuzzy technique and RADAR forecasted precipitation data was evaluated. Six rainfall events occurred at flood season in 2010 and 2011 in Chungju Reservoir basin were used for the input data. The flood estimation results according to the rainfall data used as training, checking and testing data in the model setup process were compared. The 15 models were composed of combination of the input variables and the results according to change of clustering methods were compared and analysed. From this study was that using the relatively larger clustering radius and the biggest flood ever happened for training data showed the better flood estimation. The model using MAPLE forecasted precipitation data showed relatively better result at inflow estimation Chungju Reservoir.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.126-135
• /
• 2011

In this study, the algorithm for priority area of forest fire surveillance was developed to enhance the effectiveness of fire detection. The high priority surveillance area for forest fire detection was defined as the area with not only low value of viewshed analysis of the lookouts and detection cameras but also high fire occurrence probability. To build the priority map, fuzzy function and map algebra were used. The analysis results of Bonghwa-gun, Gyeongbuk Province, showed that the surveillance priority of central and southern area is higher than north area. This algorithm could be used in the allocation of fire prevention resources and selection of suitable point for new fire detection system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.413-417
• /
• 2007

2006년 11월 이후 신 차량 번호판 등장 후, 신 차량 번호판 차량이 꾸준히 증가하고 있다. 이에 따라 속도위반, 신호위반 단속, 무인 주차 관리 시스템, 범죄 및 도주 차량 검거, 고속도로 톨게이트에서 통행료 지불로 인한 교통 체증현상을 해소하기 위한 자동 요금 징수와 같은 다양한 경우에서 신 자동차 번호판의 특징에 맞는 인식 시스템이 요구되고 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해 지능형 신 자동차 번호판 인식 방법을 제안한다. 무인 카메라에서 획득된 신 차량 영상을 그레이 레벨로 변환한 후에 블록 이진화한다. 블록 이진화된 차량 영상을 대상으로 차량의 형태학적 특징을 적용하여 잡음을 제거한 후, 번호판 영역을 추출한다. 추출된 번호판 영역에 대해 Grassfire 알고리즘을 적용하여 개별 코드를 추출한다. 차량 번호판을 인식하기 위하여 추출된 개별 코드를 퍼지 ART 알고리즘을 적용하여 학습 및 인식한다. 제안된 차량 번호판 추출 및 인식 방법의 성능을 평가하기 위해 100장의 차량 영상을 대상으로 실험한 결과, 제안된 차량 번호판 추출 및 인식 방법이 실험을 통해서 효율적인 것을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.25-31
• /
• 2011

Principal component analysis (PCA) is a well-known method for dimensionality reduction and feature extraction. Although PCA has been applied in many areas successfully, it is sensitive to outliers due to the use of sum-square-error. Several variants of PCA have been proposed to resolve the noise sensitivity and, among the variants, improved robust fuzzy PCA (RF-PCA2) demonstrated promising results. RF-PCA2, however, still can fall into a local optimum due to equal initial membership values for all data points. Another reason comes from the fact that RF-PCA2 is based on sum-square-error although fuzzy memberships are incorporated. In this paper, a variant of RF-PCA2 called RF-PCA3 is proposed. The proposed algorithm is based on the objective function of RF-PCA2. RF-PCA3 augments RF-PCA2 with the objective function of PCA and initial membership calculation using data distribution, which make RF-PCA3 to have more chance to converge on a better solution than that of RF-PCA2. RF-PCA3 outperforms RF-PCA2, which is demonstrated by experimental results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.228-237
• /
• 2021

In those day, the Busan local government had instituted a rule to support and enhance competition as well as improve respect for the ship management industry. This study aims to extract the cause factors to enhance such competition using intuitionistic decision making trial and evaluation laboratory (DEMATEL) and interpretive structural modeling (ISM) methods. First, eight factors were extracted from the specifications in the Ship Management Industry Development Act. Second, the intuitionistic fuzzy number was converted to a crisp number using the standard fuzzy number. Third, the influence relationship was analyzed using DEMATEL, and the priority ranks for the factors are determined using ISM. From the results of the impact relationship analysis, the three main cause factors were determined as improvement of technical ship management capability, improvement of expertise of manpower for onshore management, and improvement of the quality of the Korean seafarer. The priorities under the ISM method, in descending order, were as follows: improvement of the quality of Korean seafarers, improvement of professionalism among the manpower for shore management, improvement of technical ship management capability, improvement of commercial ship management capability, establishment of a comprehensive information system, improvement of the working conditions and employment environment for seafarers, financial support such as overseas orders, and strengthening the availability of foreign seafarers. Therefore, it is necessary to prioritize policy promotion based on these factors, especially the top three, as these have the highest impact.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.247-254
• /
• 2006

Biometrics are getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry can be used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. It could also be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. This system presents verification results based on hand measurements of 20 individuals. The verification process has been tested on a size of $320{\times}240$ image, and result of the verification process have hit rate of 95% and FAR of 0.020.