• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.525-528
• /
• 2005

The tracking antenna system must be always pointed to target moving vehicle. Especially, for an antenna mounted on a movable vehicle, it needs the stabilized antenna system. In this paper, two types of fuzzy controller were derived and applied to a data link antenna system and the altitude control of unmanned helicopter, respectively. A simplified Fuzzy-PID controller was designed for 2-axes antenna stabilization and tracking system and the performance was verified by simulations and experiments. Computer simulations were performed by Matlab and SIMULINK. A 2-Axes antenna (SeaTel 1898 model) was selected as test platform of this research. The antenna was modified by using two Blushless Direct Current motors and an embedded DSP controller. To verify the performance of designed antenna servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, were compared.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.486-489
• /
• 1996

The objective of this paper is to design a force feedback controller for bilateral control of a master-slave manipulator system. In a bilateral control system, the motion of the master device is followed by the slave one, while the force applied to the slave is reflected on the master. In this paper, a fuzzy logic controllers applied to the system. Using the fuzzy logic controller, the knowledge of the system dynamics is not needed. Simulations and experimental results show the performance of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1271-1276
• /
• 1990

The paper describes and presents the experimental results of a fuzzy control scheme applied to an electric power system. The fuzzy control scheme which was recently proposed by T. Hiyama and T. Nakano [1] is implemented on a digital processor with A/D and D/A converters and is tested on our laboratory system. The results show that the proposed fuzzy controller with optimal settings of its parameters gives better performance than the PSS (Power System Stabilizer) optimally adjusted. The problems encountered throughout the experiment are also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.127-130
• /
• 1990

The fuzzy logic controller which can be applied to various industrial processes is quite often dependent on the heuristics of the experienced operator. The operator's knowledge is often uncertain. Therefore an incorrect control rule on the basis of the operator's information is a cause of bad performance of the system. This paper proposes a new self-learning fuzzy control method by the fuzzy system identification using the data pairs of input and output and arbitrary initial relation matrix. The position control of a DC servo motor model is simulated to verify the effectiveness of the proposed algorithm.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.127-129
• /
• 2008

This paper describes a method of approximate reasoning for fuzzy control of servo system, based on decomposition of -level fuzzy sets. It is propose that logic circuits for fuzzy PI+PD are a body from fuzzy inference to defuzzificaion in cases where the output variable u directly is generated PWM. The effectiveness for robust and faster response of the fuzzy control scheme is verified for a variable parameter by comparison with a PID control and fuzzy control. A position control of DC servo system with a fuzzy logic controller successfully demonstrated.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2012

In this paper, an adaptive fuzzy control system is proposed for the speed control of the ASV (Autonomous Surface Vehicle) with nonaffine nonlinear system dynamics. We consider the turning speed of the screw propeller to be the control input instead of thrust so that we do not have to know the exact function between turning speed and thrust. But in this case, the ASV becomes a nonaffine nonlinear system because thrust is a nonlinear function of the turning speed. To solve this problem, we propose a Takagi-Sugeno fuzzy-model-based control system and simulation studies are performed. Simulation results show the effectiveness of the proposed control scheme.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1223-1232
• /
• 2004

We present a new technique to the design and real-time implementation of fuzzy control system basedon digital signal processors in order to improve the precision and robustness for system of industrial robot in this paper. The need to meet demanding control requirement in increasingly complex dynamical control systems under significant uncertainties, leads toward design of intelligent manipulation robots. The TMS320C80 is used in implementing real time fuzzy control to provide an enhanced motion control for robot manipulators. In this paper, a Self-Organizing Fuzzy Controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variables of the controller. In the synthesis of a Fuzzy Logic Controller, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult Self-Organizing Fuzzy Controller is proposed for a hierarchical control structure consisting of basic and high levels that modify control rules. The proposed Self-Organizing Fuzzy Controller scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for a Dual-Arm robot with eight joints.

• 제어로봇시스템학회논문지
• /
• 제20권1호
• /
• pp.18-21
• /
• 2014

We propose a nonlinear observer design method for traffic control systems based on T-S fuzzy approach. We parameterize the observer gains in terms of the solution matrices of LMIs. We also give a simple algorithm to compute the observer gain matrices. Finally we give simulation results to show the effectiveness of the proposed fuzzy observer design method.

• Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.137-147
• /
• 2015

In this study, a new methodology in predicting a system output has been investigated by applying a data mining technique and a hybrid type II fuzzy system in CNC turning operations. The purpose was to generate a supplemental control function under the dynamic machining environment, where unforeseeable changes may occur frequently. Two different types of membership functions were developed for the fuzzy logic systems and also by combining the two types, a hybrid system was generated. Genetic algorithm was used for fuzzy adaptation in the control system. Fuzzy rules are automatically modified in the process of genetic algorithm training. The computational results showed that the hybrid system with a genetic adaptation generated a far better accuracy. The hybrid fuzzy system with genetic algorithm training demonstrated more effective prediction capability and a strong potential for the implementation into existing control functions.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.702-708
• /
• 2010

This paper proposes a novel linearization method for Takagi.sugeno (TS) fuzzy model. A T-S fuzzy controller consists of linear controllers based on local linear models and the local linear controllers cannot be designed independently because of overall stability conditions which are usually conservative. To use linear control theories easily for T-S fuzzy system, the linearization of T-S fuzzy model is required. However, The linearization of T-S fuzzy model is difficult to be achieved by using existing linearization methods because fuzzy rules and membership functions are included in T-S fuzzy models. So, a new linearization method is proposed for the T-S fuzzy system based on the idea of T-S fuzzy state transformation. For the T-S fuzzy system linearized with uncertainties, a robust optimal controller with the robustness of sliding model control(SMC) is designed.