• 제목/요약/키워드: Future technology

검색결과 12,519건 처리시간 0.041초

지도 기반 데이터 시각화 플랫폼 사용성 평가 기준 개발 및 적용 연구 (Usability Evaluation Criteria Development and Application for Map-Based Data Visualization)

  • 문성하;윤현수;양승원;오상희
    • 한국문헌정보학회지
    • /
    • 제58권2호
    • /
    • pp.225-249
    • /
    • 2024
  • 본 연구의 목적은 지도 기반 데이터 시각화 플랫폼에 적합한 평가 도구를 개발하고, 이를 현재 상용되고 있는 지역간 정보를 나타내는 지도 기반 데이터 시각화 플랫폼을 대상으로 휴리스틱 사용성 평가를 수행하는 것이다. 본 연구에서는 Nielsen(1994)의 사용성 평가 10가지 원칙과 함께 지도 기반 플랫폼의 사용성 평가 기준을 다룬 선행연구들의 결과를 비교·분석하여 (1) 가시성, (2) 실세계와의 일치, (3) 일관성 및 표준, (4) 사용자 제어 여부와 친화성, (5) 융통성, (6) 디자인, (7) 호환성, (8) 오류 방지 및 해결, (9) 도움말 제공 및 문서화로 9가지의 평가 항목을 개발하였다. 또한, 개발한 평가 항목의 실효성을 확인하기 위해, 국내외 5개의 지도 기반 데이터 시각화 플랫폼을 대상으로 전문가 4명을 초빙하여 사용성 평가를 진행하였다. 평가 결과, 전문가들은 제안한 지도 기반 데이터 시각화 사용성 평가 기준을 사용하여, 수치화한 점수와 주관적 의견을 포함한 5개 플랫폼의 사용성을 순위화한 평가 결과를 도출할 수 있었다. 본 연구의 결과는 향후 지도 기반 시각화 플랫폼을 개발하고 평가함에 있어서 전반적인 가이드라인의 기초 자료가 될 수 있을 것으로 기대한다.

인공위성 로봇팔 탑재체의 열 제어 설계 및 해석 개발 동향 (Development Trends of Thermal Control Design and Analysis of Robotic Arm Payload for Spacecraft )

  • 신한섭;김해동
    • 우주기술과 응용
    • /
    • 제4권1호
    • /
    • pp.27-47
    • /
    • 2024
  • 뉴스페이스(New Space) 시대에 이르러 궤도상 서비싱(OOS, on orbit servicing) 임무를 수행하기 위한 인공위성들이 개발되고 있다. 궤도상 서비싱을 위한 다양한 임무는 고장수리, 재급유, 견인, 구성품 교체, 우주 상 건설 등의 여러 임무가 있으며, 이를 수행하기 위해 로봇팔 탑재체가 탑재되어야 한다. 로봇팔 탑재체는 기존 인공위성의 탑재체와 달리 고정된 상태로 움직이지 않는 것이 아니라 임무 수행을 위해 지속적으로 움직여야 하는 탑재체라는 특징이 있으며, 또한 인공위성의 구조체 내부에 존재하는 것이 아닌 우주공간에 직접적으로 노출된 상태로 임무 수행을 해야 한다는 특징이 있다. 이러한 탑재체의 특징으로 인해 극한의 우주 열환경에서 이상 없이 운용될 수 있는 열 설계 및 해석은 필수적이나, 로봇팔 열 설계 및 해석에 대한 논문은 그리 많지 않은 실정이다. 본 논문에서는 현재까지 개발된 로봇팔 탑재체에 대한 열 설계, 해석에 대한 사례들을 소개 및 정리하였으며, 마지막에는 앞으로 개발할 로봇팔 탑재체의 열 설계 및 해석에 대한 방향을 제시해 보고자 한다.

한국형 달 고원 모사토(KIGAM-L1) 개발 (Development of Korean Lunar Highland Soil Simulant (KIGAM-L1))

  • 강태윤;김어진;김경자
    • 우주기술과 응용
    • /
    • 제4권2호
    • /
    • pp.121-136
    • /
    • 2024
  • 2022년 8월 발사된 한국형 탐사선(KPLO)이 현재 임무를 성공적으로 수행하고 있으며, 향후 한국의 달 착륙선과 로버 프로그램이 진행될 것으로 기대된다. 달착륙선이 표면에 착륙한 후 임무를 성공적으로 수행하기 위해서는 장착할 장비의 성능을 달과 유사한 실험실 환경에서 점검해야 한다. 이를 위해 달 착륙 지점의 표면을 시뮬레이션하기 위해 미국, 중국 등 여러 나라에서 아폴로 착륙선의 달 토양 샘플과 유사한 달 토양 모사토를 개발하여 사용한다. 국내에서도 여러 달 탐사선 착륙지가 거론되고 있고 달 바다 토양의 특성과 유사한 달 토양 모사토 KOHLS-1(Korea Hanyang Lunar Simulant-1), KAUMLS(Korea Aerospace University Mechanical Lunar Simulants), KLS-1(Korea Lunar Simulant-1)가 개발되었다. 그러나 착륙 장소로 달 고원 지대가 선택될 경우에는 앞의 세 가지 모사토는 유용하지 않다. 본 연구에서는 달 착륙선이 고원 지대에 착륙하는 경우를 대비하여 아폴로 16호 달 토양 샘플의 화학적 조성과 달 토양 샘플 60500-1의 입자 크기 분포를 기준으로 모사하여 달 고지대 토양 모사토 KIGAM-L1을 개발하는 과정을 소개한다.

핵물질 연대측정을 위한 불확도 추정 알고리즘 연구 (Uncertainty Calculation Algorithm for the Estimation of the Radiochronometry of Nuclear Material)

  • 박재찬;전태훈;송정호;주민수;정진영;권기남;최우철;정재학
    • 방사선산업학회지
    • /
    • 제17권4호
    • /
    • pp.345-357
    • /
    • 2023
  • Nuclear forensics has been understood as a mendatory component in the international society for nuclear material control and non-proliferation verification. Radiochronometry of nuclear activities for nuclear forensics are decay series characteristics of nuclear materials and the Bateman equation to estimate when nuclear materials were purified and produced. Radiochronometry values have uncertainty of measurement due to the uncertainty factors in the estimation process. These uncertainties should be calculated using appropriate evaluation methods that are representative of the accuracy and reliability. The IAEA, US, and EU have been researched on radiochronometry and uncertainty of measurement, although the uncertainty calculation method using the Bateman equation is limited by the underestimation of the decay constant and the impossibility of estimating the age of more than one generation, so it is necessary to conduct uncertainty calculation research using computer simulation such as Monte Carlo method. This highlights the need for research using computational simulations, such as the Monte Carlo method, to overcome these limitations. In this study, we have analyzed mathematical models and the LHS (Latin Hypercube Sampling) methods to enhance the reliability of radiochronometry which is to develop an uncertainty algorithm for nuclear material radiochronometry using Bateman Equation. We analyzed the LHS method, which can obtain effective statistical results with a small number of samples, and applied it to algorithms that are Monte Carlo methods for uncertainty calculation by computer simulation. This was implemented through the MATLAB computational software. The uncertainty calculation model using mathematical models demonstrated characteristics based on the relationship between sensitivity coefficients and radiative equilibrium. Computational simulation random sampling showed characteristics dependent on random sampling methods, sampling iteration counts, and the probability distribution of uncertainty factors. For validation, we compared models from various international organizations, mathematical models, and the Monte Carlo method. The developed algorithm was found to perform calculations at an equivalent level of accuracy compared to overseas institutions and mathematical model-based methods. To enhance usability, future research and comparisons·validations need to incorporate more complex decay chains and non-homogeneous conditions. The results of this study can serve as foundational technology in the nuclear forensics field, providing tools for the identification of signature nuclides and aiding in the research, development, comparison, and validation of related technologies.

기업가정신과 창업의지의 구조에 관한 모델링 연구 (Modeling Study on The Structure of Entrepreneurship and Entrepreneurial Intention)

  • 장재훈;최미리;정성광
    • Journal of Platform Technology
    • /
    • 제12권3호
    • /
    • pp.41-54
    • /
    • 2024
  • 최근에는 다양한 형태의 창업에 대한 지원이 늘어나고 있습니다. 이와 함께 창업에 대한 지원 확대 및 창업 성과 확대를 위해 창업교육에 대한 관심도 증대되고 있다. 따라서 창업교육 및 지원의 대상과 관심은 대학생과 일반 대중을 넘어 고등학생까지 범위를 확대하고 있다. 이에 따라 본 연구의 경우 창업에 대한 의도확대를 증대시키고자 기업가정신의 역량과 창업태도 및 창업의지의 관계에 대해 보다 심층적으로 알아보고자 한다. 분석결과 기업가정신의 역량(창의성, 위험감수성, 혁신성)은 창업태도에 긍정적인 영향을 미쳤으며, 창업태도는 창업의지에 긍정적인 영향을 미쳤다. 창업태도의 기업가정신 역량(창의성, 위험감수성, 혁신성)과 창업의지의 관계에서의 매개효과에 대한 분석결과는 다음과 같다. 창의성과 창업의지의 관계에서 창업태도는 부분매개역할을 하였다. 위험감수성과 창업의지의 관계에서 창업태도는 부분매개역할을 하였다. 혁신성과 창업의지의 관계에서 창업태도는 완전매개역할을 하였다. 연구결론에서는 본 연구 결과의 요약, 기업가 및 창업에 대한 시사점과 더불어 본 연구의 한계 및 향후 연구방향을 제시하였다.

  • PDF

동북진흥전략 배경하에서 흑룡강성 관광산업의 효율성 변화 (The Change of Tourism Industry Efficiency in Heilongjiang Province under the Background of Northeast Revitalization Strategy)

  • 왕뢰;정기영
    • 산업진흥연구
    • /
    • 제9권3호
    • /
    • pp.295-309
    • /
    • 2024
  • 중국 동북진흥전략의 시행과 함께 흑룡강성 관광산업은 지역 경제발전에 점점 더 큰 영향을 미치고 있다. 본 논문은 2005-2021년 흑룡강성 관광 패널데이터를 기반으로 DEA-BCC와 Malmquist Index를 사용하여 관광 산업의 정적 및 동적 변화를 분석하였다. 연구의 결과는 다음과 같다. (1) 정적: OE 값은 2010년, 2013년 및 2019년에 DEA의 강력한 효과에 도달하여 관광 자원이 충분히 활용된 것으로 나타났다. SE 값은 0.354-1 사이에서 급격히 변하고, PTE 값은 1에 가까우며 OE는 주로 SE 변화의 영향을 받은 것으로 나타났다. (2) 동적: 총 요소 생산성(TFP)은 전체적으로 1보다 크고, 연평균 13.8%의 성장률을 보였다. TFP의 변동은 주로 기술진보지수에 의해 영향을 받았으며, 흑룡강성의 관광산업이 상대적으로 높은 수준의 개발 효율성을 보였으며, 자원개발에 기술을 충분히 활용하고 있음을 알 수 있었다. 따라서 흑룡강성 관광산업은 향후 산업규모, 기술혁신 및 정책최적화에 중점을 두는 것이 적절할 것으로 보인다.

Measurement and analysis of tractor emission during plow tillage operation

  • Jun-Ho Lee;Hyeon-Ho Jeon;Seung-Min Baek;Seung-Yun Baek;Wan-Soo Kim;Yong-Joo Kim;Ryu-Gap Lim
    • 농업과학연구
    • /
    • 제50권3호
    • /
    • pp.383-394
    • /
    • 2023
  • In Korea, the U.S. Tier-4 Final emission standards have been applied to agricultural machinery since 2015. This study was conducted to analyze the emission characteristics of agricultural tractors during plow tillage operations using PEMS (portable emissions measurement systems). The tractor working speed was set as M2 (5.95 km/h) and M3 (7.60 km/h), which was the most used gear stage during plow tillage operation. An engine idling test was conducted before the plow tillage operation was conducted because the level of emissions differed depending on the temperature of the engine (cold and hot states). The estimated level of emissions for the regular area (660 m2), which was the typical area of cultivation, was based on an implement width of 2.15 m and distance from the work area of 2.2 m. As a result, average emission of CO (carbon monoxide), THC (total hydrocarbons), NOx (nitric oxides), and PM (particulate matter) were approximately 6.17×10-2, 3.36×10-4, 2.01×10-4, and 6.85×10-6 g/s, respectively. Based on the regular area, the total emission of CO, THC, NOx, and PM was 2.62, 3.76×10-2, 1.63, and 2.59×10-4 g, respectively. The results of total emission during plow tillage were compared to Tier 4 emission regulation limits. Tier 4 emission regulation limits means maximum value of the emission per consumption power (g/kWh), calculated as ratio of the emission and consumption power. Therefore, the total emission was converted to the emission per power using the rated power of the tractor. The emission per power was found to be satisfied below Tier 4 emission regulation limits for each emission gas. It is necessary to measure data by applying various test modes in the future and utilize them to calculate emission because the emission depends on various variables such as measurement environment and test mode.

Stable diffusion의 기저 모델에 따른 콘크리트 손상 영상의 생성 품질 비교 연구 (A Study on Generation Quality Comparison of Concrete Damage Image Using Stable Diffusion Base Models)

  • 심승보
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권4호
    • /
    • pp.55-61
    • /
    • 2024
  • 최근 들어 노후화된 콘크리트 구조물의 비중이 점차 늘어나는 추세다. 이는 대다수의 구조물이 기대수명에 근접하고 있기 때문이다. 이 같은 구조물은 정확한 점검과 지속적인 관리가 필수적으로 요구되며, 철저한 점검이 이루어지지 않을 경우 본래의 기능과 성능이 저하되어 안전사고로 이어질 수 있음은 자명한 사실이다. 따라서 딥러닝과 컴퓨터 비전을 이용한 객관적인 점검 기술에 대한 연구가 활발하기 이뤄지고 있다. 특히 고해상도는 미세한 균열뿐만 아니라 박락과 철근 노출까지 정확하게 관찰할 수 있으며, 딥러닝을 통해서 자동화 탐지가 가능하다는 장점이 있다. 딥러닝은 다양하고 다수의 훈련 데이터가 있어야지만 높은 탐지 성능을 보장할 수 있지만, 콘크리트의 표면 손상은 비정상 장면으로 일반적으로 촬영하여 확보할 수 있는 데이터가 아니므로 훈련 데이터의 수는 부족할 수밖에 없다. 이러한 한계를 극복하기 위해서 이 연구에서는 stable diffusion을 통해 균열, 박락, 철근 노출을 포함하고 있는 콘크리트 표면 손상 영상을 생성하는 방법을 제안했다. 이는 문자열과 영상이 쌍을 이룬 데이터로 새로운 손상 영상을 합성하는 방법이다. 이를 위해서 총 678장의 훈련 데이터 세트를 구축했고, low rank adaptation을 통해서 fine-tuning을 수행했다. 이때 stable diffusion의 세 가지 기저 모델에 따른 생성 영상의 품질을 비교했다. 결과적으로 가장 다양하고 고품질의 콘크리트 손상 영상을 합성하는 방법을 완성했다. 이 연구는 향후 데이터 부족 문제 해결에 기여하여 딥러닝 기반 손상 탐지 알고리즘의 정확도 향상에 긍정적인 영향을 미칠 것으로 기대한다.

한국(韓國)의 의료기사(醫療技士) 교육제도(敎育制度)에 관(關)한 조사(調査) 연구(硏究) (A Study of Educational System for Medical Technologists in Korea)

  • 송재관;이건섭;김병락;김정락;조준석;허준;이준일
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제6권1호
    • /
    • pp.131-181
    • /
    • 1983
  • After the investigation on, and the analysis of, the educational system for medical technicians and the present educational situation for medical technologies in this country, the following conclusions were drawn. 1. As of March 1983 the current academic system for education in medical technologies included the regular 4-year college courses and those of the 2-year professional junior college courses. But except in the cases on clinical pathology and physical therapy, there were no college-level departments. Particularly, no educational institutions, at whatever level, had a department for working therapies. 2. The total number of credits needed for graduation from a department of medical technologies was 150 points at a regular 4-year college and 85 to 96 points at a 2-year professional college. The obligatory minimum number of credits for a student at a professional college was set at 80 points and above. 3. As for the number of the educational institutions for medical technologies in this country, there were one regular college and 14 professional colleges, a total of 15 institutions. As many as 14 colleges had departments of clinical pathology, 12 had departments of Radiotechnology, 11 had departments of physical therapy, 12 had departments of dental technology, and eight had departments of dental hygiene. 4. The total capacity of the professional colleges in admitting new enrollment each year were 1,920 for clinical pathology, 1,552 for radiology, 1,012 for physical therapy, 1,334 for dental technologies, 828 for dental hygiene, an aggregate of 6,646 for all of the professional college departments. 5. The total number of graduates from the 12 professional colleges by department during the period of 1965-83 were 7,595 for clindical pathology, 4,768 for radiology, 2,821 for physical therapy, 3,000 for dental technologies, and 1,787 for dental hygiene, totalling 19,971 for all departments in the professional colleges. 6. In the state examination for licensed medical technicians, 12,446 have passed from among the total of 26,609 participants, representing a 45% passing ratio. By departments the ratios showed 44% for clinical pathology, 39.7% for radiology, 51.2% for physical therapy, 42.5% for dental technology, 72.5% for dental hygiene and 73.1% for working therapy. 7. As for the degree of satisfaction shown by the people in this field, 52.2 percent of the teaching staffs who responed to the questionaires said they were satisfied with their present profession, while the great majority of medical technicians(66%) replied that they were indifferent to the problem. 8. The degree of satisfaction shown by the students on their enrollment in this particular academic field was generally in the framework of indifference(43.7%), but mere students(36.5%) were satisfied with their choice than those were not satisfied(14.4%) 9. As for the student's opinions on the lectures and practicing hours, a good many students replied that, among such courses as general science and humanities courses the basic medical course, the major course and practicing hours, the hours provided for the general courses(47.1%) and practicing(47.6%) were insufficient. 10. When asked about the contents of their major courses, comparatively few students (23.6%) replied that the courses were too difficult, while a convincing majority(58.5%) said they were neither difficult nor easy. As for the appropriateness of the number of the present teaching staffs, a great majority(71.0%) of the students replied that the level of the teaching personnel in each particular field was insufficient. 11. Among the students who responded to the poll, good part of them(49.5%) wanted mandatory clinical practicing hours, and the the majority of them(64.6%) held the view that the experimental and practicing facilities of their schools were insufficient. 12. On the necessity of the attached hospitals, 71.1% of the teaching staffs and 58.0% of the medical technicians had the opinion that this kind of facility was indispensable. 13. As for the qualifications for applicants to the state examination in the licensing system for medical technicians, 52.2% of the teacher's and 36% of the medical technicians replied that the present system granting the qualifications according to the apprenticeship period should be abolished. 14. On the necessity of improving the present system for education in medical technologies, an overwhelming majority(94.4% of the :caching staffs, 92.0% of the medical technicians and 91.9% of students) of these polled replied that the present system should be changed for the better. 15. On the method of changes for the present educational system, a great majority(89.4% of the teaching staffs, 80.4% of the medical technicians and 90.1% of the students) said that the system must be changed so that it fits into the reality of the present day. 16. As for the present 2-year program for the professional colleges, 61.6% of the teachers, 72.0% of the medical technicians and 38.8% of the students expressed the hope that the academic period would be extended to four regular years, hemming a full-fledged collegelevels program. 17. On the life-long eductional system for medical technicians, there was a considerable number of people who expressed the hope that an open university system(38.9% of the teaching staffs, 36.0% of the medical technicians) and a graduate school system would be set up. 18. As for the future prospects for medical technicians as professionals, the optimists ana pessimists were almost equally divided, and 41.1% of the teaching staffs 36.0% of. the technicians and 50.5% of the students expressed an intermediate position on this issue.

  • PDF

국토위성정보 활용기술 및 운영시스템 개발: 성과 및 의의 (CAS 500-1/2 Image Utilization Technology and System Development: Achievement and Contribution)

  • 윤성주;손종환;박형준;서정훈;이유진;반승환;최재승;김병국;이현직;이규성;권기억;이계동;정형섭;정윤재;최현;구대성;최명진;신윤수;최재완;어양담;정종철;한유경;오재홍;이수암;장은미;김태정
    • 대한원격탐사학회지
    • /
    • 제36권5_2호
    • /
    • pp.867-879
    • /
    • 2020
  • 본격적인 우주기술 활용시대가 전망되는 현재의 시점에서 고해상도 영상취득이 가능한 국토관측위성의 발사가 2021년으로 예정되어 있다. 이에 따라 국토관측위성의 지상국의 핵심설계요소로 영상사용자의 위성영상 활용성과 작업자의 처리효율성 증대가 강조되어 왔다. 이에 대응하여, 국토관측위성의 수집, 처리, 저장, 관리 및 활용을 위한 핵심기술과 국토관측위성 지상국의 운영시스템을 개발하는 국토관측위성 수집 및 활용기술개발 연구사업이 진행되었다. 본 논문에서는 상기 연구개발사업의 성과로 개발된 국토관측위성 활용핵심기술과 지상국 운영시스템 개발결과를 소개한다. 개발된 지상국 운영시스템은 한반도 전역의 GCP(Ground Control Point) chip DB(Database)와 DEM(Digital Elevation Model) DB를 시스템 내에 구축하여 자동화된 방식으로 정밀정사영상을 생성하기 위한 기술 및 시스템을 구현하였다. 나아가 생성된 정밀정사영상을 1:5,000 도엽단위로 분할한 도엽정사영상을 생산하여 향후 분석준비자료 (ARD(Analysis Ready Data)) 체계로 발전할 수 있도록 개발하였다. 또한 정밀정사영상 및 도엽정사영상으로부터 DSM(Digital Surface Model)자료, 변화탐지지도, 객체추출지도 등 다양한 활용산출물이 체계적으로 생산될 수 있도록 활용산출물 생산 SW를 지상국 운영시스템과 연동시킬 수 있게 개발하였다. 본 연구진이 개발한 국토위성정보 활용기술 및 운영시스템은 국내 최초로 한반도 GCP chip DB구축을 통해서 자동화된 정밀정사영상생성 기술을 확보하고 다양한 활용산출물의 생산을 위성지상국 운영시스템에 접목했다는 점에서 의의가 있다고 판단된다. 개발된 국토위성정보 운영시스템은 국토관측위성의 주 활용부처인 국토지리정보원 국토위성정보활용센터에 설치되었으며, 향후 동 센터의 업무에 크게 기여할 것으로 바라보고 있다. 또한, 향후 발사예정인 여러 저궤도 지구관측위성의 지상국 시스템에 대한 기준을 제시할 수 있을 것으로 기대한다.