• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.61-65
• /
• 2009

In this paper, we report on the growth and optical characteristics of white-LED without fluorescent material. The growth of DH(double heterostructure) with AlGaN active layer was performed on a n-GaN/(0001) $Al_{2}O_{3}$ by the mixed-source HVPE and multi-sliding boat. The CRI(color rendering index) of packaging device charged in the range 72-93 with CIE chromaticity coordinates(x=$0.26{\sim}0.34$, y=$0.31{\sim}0.40$). And CCT(correlated color temperature) values was measured $5126{\sim}10406K$ with increasing injection current. The CIE point of conventional phosphor white LED shifts blue region, but cm point of non-phosphor white LED shifts opposite direction. These results show the mixed-source HVPE can be possible to newly fabricate method of phosphor free white LED with high CRI value.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.411-423
• /
• 2020

Localized solar irradiance is normally derived from atmospheric transmission influenced by atmospheric composition and conditions of the target area. Specially, for the area with complex coastal lines such as Taean gun, the accurate estimation of solar irradiance requires for in depth analysis of atmospheric transmission characteristics based on the localized vertical profiles of the key atmospheric parameters. Using MODTRAN (MODerate resolution atmospheric TRANsmission) 6, we report a computational study on clear day atmospheric transmission and direct solar irradiance estimation of Taean gun using the data collected from 3 ground stations and radiosonde measurement over 93 clear days in 2018. The MODTRAN estimated direct solar irradiance is compared with the measurement. The results show that the normalized residual mean (NRM) is 0.28 for the temperature based MODTRAN atmospheric model and 0.32 for the pressure based MODTRAN atmospheric model. These values are larger than 0.1~0.2 of the other study and we understand that such difference represents the local atmospheric characteristics of Taean gun. The results also show that NRM tends to increase noticeably in summer as the temperature increases. Such findings from this study can be very useful for estimation and prediction of the atmospheric condition of the local area with complex coastal lines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.261-268
• /
• 2018

The use of electric cable was limited due to the installation time and large space as the increase of power demand and load quantity in side line. In order to solve these problems, the application of busway system which can supply the large current was increasing. But it was lack of methods of performance tests to evaluate the reliability and results of test for busway system. In this paper, we presented items to evaluate the reliability test for epoxy coated busway system with reference to IEC 61349-6. In addition, we proposed items to evaluate the reliability and long term life cycle test for the epoxy coated busway system. The combined acceleration deterioration test that reflects actual conditions of the survey as much as possible was conducted considering both thermal and electrical stresses. The deterioration condition was selected to satisfy fifty years life expectation and the insulation performance verification test of the busway system confirmed the long term life prediction. Furthermore, as test items for reliability assessment of compliance with the environment for the use of temperature, humidity and load current where busway system was installed, thermal overload test, water immersion test, cold shock temperature test and thermal cycle test were performed. And we examined changes in characteristics and abnormality after tests. From results, the test items presented to evaluate performance and reliability of the epoxy insulated busway system were confirmed to be appropriate in this paper, and the performance of the product was also confirmed to be excellent for reliability tests.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2023

A non-rare earth-based strontium-aluminate red light emitting phosphor was synthesized by a solid-state reaction method and the effect of synthesis temperature and Mn⁴⁺ activator concentration on the photoluminescence characteristics of the phosphor was studied. The synthesized SrAl₂O₄:Mn⁴⁺ phosphor showed broad band absorption characteristics in the near-ultraviolet and blue regions with peaks at wavelengths of near 330 and 460 nm, and a triple band deep red emission consisted of three peaks at near 644, 658, and 673 nm. The SrAl₂O₄:Mn⁴⁺ phosphor synthesized at a temperature 1600℃ and a Mn⁴⁺ activator concentration of 0.5 mol% showed the strongest PL emission intensity, and concentration quenching was observed at concentrations higher than 0.7 mol%. FE-SEM and DLS particle size distribution analysis showed that the synthesized SrAl₂O₄:Mn⁴⁺ phosphor had a particle size distribution of 2~6.4 ㎛ and an irregular spherical shape with an average particle size of ~4 ㎛.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2015

As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.

• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.425-435
• /
• 1998

To improve the efficiency of nuclear transplantation in bovine, in this study the development in vitro of nuclear transferred (NT) embryos was compared by different activation regimens of the enucleated oocytes. The effect of developmental stage and culture system of donor nuclei on fusion and development in vitro of NT embryos were also evaluated. Oocytes were collected from Hanwoo ovaries obtained from slaughterhouse and matured in Ham's F-10 supplemented with hormones. After 20~22 h maturation, the oocytes were vortexed to be free from cumulus cells and subsequently their nucleus and the first polar body were removed. Enucleated oocytes were divided into 3 groups for activation; the oocytes of group I were activated with ionomycin for 5 min and subsequently incubated in 6-dimetylarninopurine (DMAP) for 4 h, Those of group II were treated with DMAP for 4 h at 39 h after onset of in vitro maturation (IVM) and those of group III were kept in room temperature ($25^{\circ}C$) for 3 h at 39 h after onset of IVM. After in vitro fertilization (IVF) the embryos for muclear donor were cultured either by group culture (20 embryos /50 ${mu}ell$ drop) or individually (1 embryo /50 ${mu}ell$ drop) for 4 day and 5 day. At day 4 and 5 after IVF, blastomeres were separated in calcium-magnesium free medium, and then classified into small (day 5: $\leq$ 38 ${\mu}{\textrm}{m}$, day 4: $\leq$ 46 ${\mu}{\textrm}{m}$) and large (day 5 : $\geq$ 38 ${\mu}{\textrm}{m}$, day 4 ; $\geq$ 46 ${\mu}{\textrm}{m}$). The separated blastomeres were replaced into enucleated and activated recipient cytoplasm. The blastomere-oocyte complexes were fused by electrically. The NT embryos were cultured in TCM-199 containing 10% FCS in 39$^{\circ}C$, 5% $CO_2$ incubator for 7 day. The results obtained were summarized as follows; There were no differences in fusion and development to blastocyst between groups as group I (68%, 10%), group II (75%, 14%) and group III (73%, 9%), respectively. However, the cell number in blastocyst of NT embryos in group III were significantly fewer than in the other groups (P＜0.05). No differences in fusion and development to blastocyst were found between individual or group cultured and between small or large blastomeres of day 4 and day 5 donor embryos. From these results, it was concluded that the combination of ionomycin and DMAP, or treatment of DMAP at 39 h after onset of IVM were useful for the efficient of production of NT bovine embryos, and the individual cultured embryos could be simply used as donor nuclei for NT bovine embryo.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.596-602
• /
• 2006

The effects of resin additives and inorganic compounds addition on the thermal decomposition of low density polyethylene(LDPE) resin have been studied in a thermal analyzer(TGA, DSC) and a small batch reactor. The silica-alumina type compounds tested were kaolinite, bentonite, perlite, diatomaceous earth, activated clay and clay. The resin additives were antiforgging-agent and longevity-agent. As the results of TGA experiments, addition of antifogging-agent, longevity-agent and clay increased the temperature of the maximum reaction rate($T_{max}$). The silica-alumina type inorganic materials increased the pyrolysis reraction rate in the order of activated clay, diatomaceous earth, bentonite, perlites, and kaolinite. In the DSC experiments, addition of antifogging-agent and clay decreased the heat of fusion and the heat of pyrolysis reaction. Bentonite decreased 20% of the heat of fusion and 25% of the heat of pyrolysis reaction. In the batch system experiments, the mixing of clay retarded the initial producing rate of fuel oil, but increased the yield of fuel oil. Addition of bentonite increased the yield of fuel oil from LDPE resin. Mixing of antifogging-agent and longevity-agent produced the fuel oil having lower carbon number. The amounts of the carbon number below 12 in fuel oil decreased with adding the clay. That below 23 in fuel oil increased with mixing of bentonite, perlite, kaolinite, and activated clay. But the mixing of diatomaceous earth did not affect the carbon contents of fuel oil from pure LDPE resin. In the silica-alumina type inorganic material used in this experiments, bentonite was the most effective from the pyrolysis heat, yields, and the characteristics of fuel oil.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1133-1140
• /
• 2006

Human HtrA1 (High temperature requirement protein A1) is a homologue of the E. coli periplasmic serine protease HtrA. A recent study has demonstrated that HtrA1 is a serine protease involved in processing of insulin like growth factor binding protein (ICFBP), indicating that it serves as an important regulator of IGF activity. Additionally, several lines of evidence suggest a striking correlation between proteolytic activity of HtrA1 serine protease and the pathogenesis of several diseases; however, physiological roles of HtrA1 remain to be elucidated. We used the pGEX bacterial expression system to develop a simple and rapid method for purifying HtrA1, and the recombinant HtrA1 protein was utilized to investigate the optimal conditions in executing its proteolytic activity. The proteolytically active HtrA1 was purified to approximately 85% purity, although the yield of the recombinant HtrA1 protein was slightly low $460{\mu}g$ for 1 liter E. coli culture). Using in vitro endoproteolytic cleavage assay, we identified that the HtrA1 serine protease activity was dependent on the enzyme concentration and the incubation time and that the best reaction temperature was $42^{\circ}C$ instead of $37^{\circ}C$. We arbitrary defined one unit of proteolytic activity of the HtrA1 serine protease as 200nM of HtrA1 that cleaves half of $5{\mu}M\;of\;{\beta}-casein$ during 3 hr incubation at $37^{\circ}C$. Our study provides a method for generating useful reagents to investigate the molecular mechanisms by which HtrA1 serine protease activity contributes in regulating its physiological function and to identify natural substrates of HtrA1.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1447-1460
• /
• 2021

Urbanization increases the amount of impervious surface and artificial heat emission, resulting in urban heat island (UHI) effect. Local climate zones (LCZ) are a classification scheme for urban areas considering urban land cover characteristics and the geometry and structure of buildings, which can be used for analyzing urban heat island effect in detail. This study aimed to examine the UHI effect by urban structure in Suwon and Daegu using the LCZ scheme. First, the LCZ maps were generated using Landsat 8 images and convolutional neural network (CNN) deep learning over the two cities. Then, Surface UHI (SUHI), which indicates the land surface temperature (LST) difference between urban and rural areas, was analyzed by LCZ class. The results showed that the overall accuracies of the CNN models for LCZ classification were relatively high 87.9% and 81.7% for Suwon and Daegu, respectively. In general, Daegu had higher LST for all LCZ classes than Suwon. For both cities, LST tended to increase with increasing building density with relatively low building height. For both cities, the intensity of SUHI was very high in summer regardless of LCZ classes and was also relatively high except for a few classes in spring and fall. In winter the SUHI intensity was low, resulting in negative values for many LCZ classes. This implies that UHI is very strong in summer, and some urban areas often are colder than rural areas in winter. The research findings demonstrated the applicability of the LCZ data for SUHI analysis and can provide a basis for establishing timely strategies to respond urban on-going climate change over urban areas.

• Korean Journal of Microbiology
• /
• v.49 no.4
• /
• pp.309-312
• /
• 2013

Fungal cell walls consist of various glucans and chitin. Fungi produce chitinases for their growth and development. The inky cap, Coprinellus congregatus, produces at least two different chitinases during its life cycle. Chitinase 1 (chi1) is expresses throughout its life cycle while chitinase 2 (chi2) is expressed at the mushroom autolysing phase. The cloned cDNA of chi1 is successfully expressed as a fusion protein with c-myc in Pichia pastoris, and purified by the affinity chromatography. The optimum pH and temperature of Chi1 was pH 8.0 and $35^{\circ}C$, respectively when 4-nitrophenyl N,N',N"-triacetyl-${\beta}$-D-chitotrioside was used as the substrate. The $K_m$ value and $V_{max}$ for the substrate was 0.780 mM and 0.10 OD $min^{-1}unit^{-1}$, respectively. The addition of purified Chi1 resulted in total growth inhibition against several plant pathogenic fungi such as Alternaria alternata, Fusarium graminearum and Trichoderma harzianum at the concentration of 60 ${\mu}g/ml$.