• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.378-384
• /
• 1998

We investigated the possibility of systemizing data for the colour gradation of classical ceramics by build-ing program and D-basing each data information in pottery field that has been fall behind in forming data be-cause of many variable and lacking of data system. In this study we manufactured $CoAl_2O_4$ stain that has stable spinel structure at high temperature and then mixed base glaze with stain for the additive per-centage of 0.5 , 1, 5, 10, 15 wt% In thie colouring of Lime base glaze with the wide ranged melting tem-perature the colour development of cobalt-blue sintered at $1250^{\circ}C$ is better than that of $1150^{\circ}C$ $1350^{\circ}C$ The experimental conditions and data are D-based simulated programming of computer. The result of -based data appeared to be more smoothed fusion-adherence in the Matt glaze range of Lime base glaze, The variation of colouring is not found when additive content of glaze is more than 5 wt% and the stable colour development of stain was shown at the content that RO, $R_2O$ percentage is high (the content that R2O3 per-centage is low)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1533_1534
• /
• 2009

This paper presents an atmospheric micro glow plasma-jet device. The device consists of four components; a thin Ni anode, a porous alumina insulater, a stainless steel cathode and an aluminum case. The Ni anode is fabricated using micromachining technology. The anode has 10 holes, of which the hole diameter and the depth are $250{\mu}m$ and $60{\mu}m$, respectively. The discharge test is performed in nitrogen gas at atmospheric pressure for 20 kHz AC bias. The breakdown voltage is 3.5 kV at gas flow rate of 4 L/min and the the plasma-jet is blown out to ambient at 5.5 kV. In order to verify the characteristics of plasma, the current and the voltage of device are measured. The maximum temperature of plasma is $37^{\circ}C$. The plasma is well generated and stable at high voltage.

• 한국실내디자인학회논문집
• /
• 제26권5호
• /
• pp.34-41
• /
• 2017

It is necessary to conduct a basic research on fusion of ighting design or lighting environment to improve the health and quality of life of elderly people. The purpose of this study is to analyze the lighting situation of elderly people 's residential facilities in terms of space environment design plan and to analyze the trends in smart home, design and technology. It is to provide basic data for the prototype of lighting fixtures for elderly people living facilities considering functional, physiological and emotional characteristics. For the study, the target sites were selected and the results of the illumination survey of the target facilities were divided into two types of spaces, residential and other public spaces, and their location, lighting fixtures' type, color temperature, illuminance. The results of the survey showed that the overall physical illumination compared to the recommended illuminance for the elderly satisfied the recommended range and provided the appropriate brightness for the elderly. However, in the application layout of the lighting fixtures, a monotonous arrangement and a lighting fixtures type consisting entirely of simple square type fixtures and downlight types were applied. It would be desirable to use different types of lighting fixtures in the design for various functions, such as making the environment more comfortable. Future research will propose a prototype for the design direction of the subdivided lighting fixtures that classify the space according to functions and understand the vision problem of the elderly while aesthetically.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.340-345
• /
• 2016

Railway vehicle battery is supplying the power required for the initial start-up of the train, in the event of a fault in the vehicle, or catenary for supplying emergency power is one of the components are very important. Currently, the railway vehicles such as nickel-cadmium batteries are being used [1,2]. Ni-Cd batteries as a battery installed in the railway vehicles have a strong corrosion resistance is included, The charge-discharge performance is significantly degraded in cold weather, there is a danger of deterioration or explosion. Train accidents have been caused a lot of damage due to rapid deterioration and cracking of the battery and memory due to the effect of Ni-Cd batteries. In order to solve the problems, There is no risk of degradation, deterioration and leakage, cracking and exploding. maintenance is simple and applied measures proposed to apply Lithium Polymer battery of high performance. In addition, the lack of capacity problems identified by testing the different special systems is replaced by a 70Ah lithium-polymer battery is possible without changing the batteries of 50Ah caused by installing additional equipment in existing older trains were applied to the vehicle.

• Journal of Pharmaceutical Investigation
• /
• 제21권1호
• /
• pp.11-22
• /
• 1991

The purpose of this study was for the enhancement of dissolution rate of ketoprofen. The solid dispersions composed of ketoprofen(KP) and polyethylene glycol(PEG) 4000 or 6000 were prepared by fusion method at various ratios of KP to PEG (0.5 : 10, 1 : 10, 2 : 10, 3 : 10 and 4 : 10(w/w)) and their physical mixtures were also prepared at the above ratios. Dissolution tests, X-ray diffraction study and differential scanning calorimetry study were carried out. It was found that the dissolution rates of solid dispersion and physical mixture at any ratio of the two components discribed above were greater than that of the pure ketoprofen. X-ray diffraction studies of ketoprofen suggested that less than 1 to 10 ratio of ketoprofen to PEG4000 (or 6000) was required to dispersion amorphous state in the carrier. In addition, the studies of DSC showed that ketoprofen had a sharp endothermic peak at $94^{\circ}C$ but not for the solid dispersion at the same temperature.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.50-58
• /
• 2013

The Neutral Beam Injection(NBI) generates ultra-high temperature energy in the tokamak of nuclear fusion. The NBI consists of filament power supply acceleration and deceleration power supply and arc power supply(APS). The APS has characteristics of low voltage and high current. APS generate arc through constant output of voltage and current. So this paper proposed suitable buck converter for low voltage and high current. The case of proposed buck converter used parallel switch because it can increase capacity and decrease conduction loss. When an arc is generated, the NBI chamber occur high voltage. And it will break output capacitor of buck converter. Therefore the output capacitor was removed in the proposed converter. Thus buck converter with constant output is the most important design of the output inductor. In this paper, designed APS verified operation of system and stability through simulation and prototype.

• 열처리공학회지
• /
• 제26권3호
• /
• pp.113-119
• /
• 2013

Grain growth behaviors of hot-rolled AZ31 (Mg-3%Al-1%Zn) and AZ31-0.3%CaO alloys at elevated temperatures have been investigated in order to clarify the effect of CaO addition on grain stability of Mg-Al-based wrought alloy. The grain size of CaO-free alloy increased steeply from 673 K with an increase in annealing temperature from 573 to 773 K, whereas the grains of CaO-containing alloy were relatively stable up to 723 K. The activation energies for grain growth ($E_g$) were 12.2 and 18.3 kJ/mole between 573 and 673 K and 119.2 and 126.9 kJ/mole between 673 and 773 K in the AZ31 and AZ31-0.3%CaO alloys, respectively. This result indicates that grains in the CaO-added alloy possess higher thermal stability than CaO-free alloy. SEM observations on the annealed alloy samples revealed that higher grain stability resulting from CaO addition would be associated with the suppression of grain growth by Ca-related precipitate particles distributed in the microstructure.

• 한국미생물·생명공학회지
• /
• 제29권1호
• /
• pp.12-17
• /
• 2001

Aspergil-lus coreanus NR-15 and Aspergilus oryzae NR-2-5 from traditional Korean Nuruk were selected as parental strains producing starch hydrolysis enzyme. Xll(Arginine-) mutant from A. coreanus NR 15-1 showed high glu-doamylase activity and total acid productivity. Z6(Adenine-) mutant from A. oryzae NR2-5 showed the highest $\alpha$-amylase activity. Therefore, both XII and Z6 mutants were selected and investigated for the optimal conditions of protoplast formation for protoplast fusion. Mixture of equal amount of cellulase and driselase(10mg/ml each) was the most effective as lytic enzymes. The optimal pH and temperature for protoplast formation were 5.0 and $30^{\circ}C$, respectively. The most effective reaction for protoplast formation time was 4 hours. The maximum of protoplst for- mation of Xll mutant and Z6 mutant were $6.54$\times$10^{7}$ protoplasts/ ml and $3.04$\times$10^{ 7}$ protoplasts/ml, and the regen-eration frequencies of the protoplasts were 11.3% and 11.6%, respectively. The size of the protoplasts from X11 and Z6 mutants were 3~6 $\mu\textrm{m}$ and 4~9$\mu\textrm{m}$, respectively.

• Applied Biological Chemistry
• /
• 제28권1호
• /
• pp.13-18
• /
• 1985

세균의 protopalst 융합을 연구하기 위하여 Bacillus subtilis로부터 두 개의 영양 요구성 균주를 NTG처리에 의해서 분리하였다. 두 개의 영양 요구성 균주는 Uracil 요구성 균주와 Tryptophan 요구성 균주였다. $ura^-$균주와 $trp^-$균주의 친주로의 역돌연변이율은 각각 $2.4{\times}10^{-8}$과 $1{\times}10^{-8}$이하였다. Lysozyme 처리에 의하여 protoplast를 만들기 위한 최적 pH와 온도는 6.5와 $30^{\circ}C$였다. Protoplast 생성을 위한 lysozyme의 최적농도는 $200{\mu}g/ml$였다. Protoplast가 본래의 균체로 회복되는 율은 3.3%였다.

• Asian Journal of Atmospheric Environment
• /
• 제4권2호
• /
• pp.63-71
• /
• 2010

The removal characteristics for aromatic and aliphatic VOCs by electron beam (EB) were discussed in terms of several removal variables such as initial VOC concentration, absorbed dose, background gas, moisture content, reactor material and inlet temperature. It was reviewed that only reactor material was an independent variable among the potential control factors concerned. It was also suggested that main mechanism by EB should be radical reaction for the VOC removal rather than that by primary electrons. It was discussed that the removal efficiency of benzene was lower than that of hexane due to a closed benzene ring. In the case of aromatic VOCs, it was observed that the decomposition of the VOCs with more functional groups attached on the benzene ring was much easier than those with less ones. As for aliphatic VOCs, it was also implied that the longer carbon chain was, the higher the removal efficiency became. An EB-catalyst hybrid system was discussed as an alternative way to remove VOCs more effectively than EB-only system due to much less by-products. This hybrid included supporting materials such as cordierite, Y-zeolite, and $\gamma$-alumina.